Chemical Engineering

Selected Publications in the last five years (2003-2008)
Journal articles: http: Can be cited on my Elsevier website:
http://authors.elsevier.com/MyHome.html   (User: sadramel; Password: 204667)

S. M. Sadrameli, A.E.S Green, Modeling Representations of Canola Oil Catalytic Cracking for the production of Renewable Aromatics, Accepted for publication in the Journal of Analytical and Applied Pyrolysis, 2008.

S. M. Sadrameli, W. Seames, M. Mann, Prediction of higher heating values for saturated fatty acids from their physical properties, Fuel, 87(10/11):1776-1781, 2008.

M. R. Mahishi, S. M. Sadrameli, S. Vijayaraghavan, Y. Goswami, A Novel Approach to Enhance the Hydrogen Yield of Biomass Gasification Using CO2 Sorbent, ASME Journal of Eng. for Gas Turbines and Power, 130(011501):1-8, 2008.

S. M. Sadrameli, A.E.S Green, Systematics of Renewable Olefins from Thermal Cracking of Canola Oil, Journal of Analytical and Applied Pyrolysis, 78(2):445-451, 2007.

S. M. Sadrameli, Y. Goswami,  Optimum Operating  Conditions for a Combined Power  and Cooling Thermodynamic Cycle, Journal of Applied Energy, 84(3):254- 265, 2007.

M. E. Masoomi (PhD), M. Shahrokhi, S. M., Sadrameli, J. Towfighi, Modeling and Control of a Naphtha Thermal Cracking Pilot Plant, Ind. Eng. Chem. Res, 45(10):3574-3582, 2006.

M. E. Masoomi (PhD), S. M., Sadrameli, Towfighi, Simulation, Optimization and Control of Thermal Cracking Pilot Plant Furnace, Journal of Energy, 31(4):516-527, 2006

S. M. Sadrameli, A.E.S. Green, Systematics and modeling representations of naphtha thermal cracking for olefins production, Journal of Analytical and Applied Pyrolysis, 73(2):305-313, 2005.

M. Mofarahi (PhD), S. M. Sadrameli, Towfighi, J., Four-Bed Vacuum Pressure Swing Adsorption Process for Propylene/Propane Separation, Ind. & Eng. Chem. Res. 44(5):1557-1564, 2005.

A.E.S. Green, S. M., Sadrameli, Analytical Representations of Experimental Results for Polyethylene     Pyrolysis Yields, Journal of Analytical and Applied Pyrolysis, 72 (2):329-335, 2004

A. Modaresi, (MSc), S. M. Sadrameli, Modeling and Setup of a Cooling Energy Storage System, Heat Transfer Engineering, An International Journal, Taylor and Francis, 25 (4), 2004.

M. H. Hamzeh (MSc), S. M. Sadrameli, Modeling and Simulation of a side-port regenerative glass Furnace, Iranian Journal of Chemistry and Chemical Eng, 23(2):81-88, 2004

A. Niaei (PhD), J. Towfighi, S. M. Sadrameli, The combined simulation of heat transfer and pyrolysis reaction in industrial cracking furnaces, Journal of Applied thermal Engineering, 24(14-15):2251-2265, 2004.

N. Ghodsipoor (MSc), S. M. Sadrameli, Performance Optimization of a Rotary Regenerator by Experimental Design Analysis, Journal of Engineering Faculty, University of Tehran, Iran, 2004

A. ZarrineKafsh (MSc), S. M. Sadrameli, Simulation of Fixed-bed Regenerative heat exchangers for Flue gas Heat Recovery, Journal of Applied Thermal Engineering, 24 (2-3):373-382, 2004.

M. Mofarahi (PhD), S. M. Sadrameli, J. Towfighi, Characterization of activated carbon by propane and propylene adsorption, Journal of Chemical Engineering and Data, ACS, 48(5):1256-1261, 2003

A. Manafzadeh (MSc), S. M. Sadrameli, J. Towfighi, Coke deposition by physical condensation of poly-cyclic hydrocarbons in the transfer line exchanger (TLX) of ethylene plant, Journal of Applied Thermal Engineering, Elsevier, vol. 23(11):1347-1358, 2003.
S. M. Sadrameli, et.al., Dynamic Simulation of Demethanizer Column, Petroleum Technology Quarterly, Spring issue, pp. 111-115, 2003.
N. Ghodsipoor (MSc), S. M. Sadrameli, M. R. Omidkhah, Experimental and Sensitivity Analysis of a Rotary Air Pre-heater for the Flue Gas Heat Recovery, Journal of Applied Thermal Engineering, Elsevier, 23(5):571-580, 2003.
N. Tabrizi (MSc), S. M. Sadrameli, Modeling and Simulation of A Fixed bed Regenerator Utilizing PCM materials‌, International Journal of Energy Research, 27(4):431-440, 2003.
M. E. Masoomi (PhD), S. M. Sadrameli, J. Towfighi, Simulation and Optimization of a Naphtha Thermal Cracking Pilot Plant, Iranian Journal of Chemistry and Chemical En., 22(1), 2003
A, Niaei (PhD), J. Towfighi, S. M. Sadrameli, Prediction of Furnace Run Length for the Pyrolysis on Naphtha by a PC-Based Simulator, Scientia Iranica, 10(3), 2003
SH. EbnJalal (MSc), S. M. Sadrameli, E. Vasheghani, Simulation and sensitivity analysis of hydrogen purification in PSA unit of ethylene plant, Amirkabir Journal of Engineering, 14(53):58-70, 2003.

Books:
Sadrameli, M., Simulation of a Cryogenic Fixed bed Regenerator for Energy Recovery, MSc thesis, University of Leeds, Leeds 1984.  
Sadrameli, M., Investigation of Asymmetric and Unbalanced Regenerators, Ph.D. thesis, University of Leeds, Leeds, U.K., 1988
Sadrameli, M., Industrial Heat Recovery Systems, A Book published by The Ministry of Energy, Iran, 1997.
Sadrameli, M. Heat Conduction, Farsi translation of the book entitled Heat Conduction by: S.     Kakac and Y. Yener, 2000.
Sadrameli, M. Pazuki, H., Advanced Heat Transfer, in Farsi, Milad Pub., Iran, 2001

List of Selected Presentations:
Sadrameli, S. M., et al., Modeling and Simulation of a Fixed bed Regenerator Utilizing PCM materials, ISTP-12, Istanbul, July 2000
Sadrameli, S. M., et al, Shadow Effect Minimization in the Thermal Cracking Coils of Ethylene Plant, Petrotech2001, Bahrain, 29-31st Oct. 2001
Sadrameli S. M., et al, Fouling in Transfer line of Ethylene Plant by Physical condensation, Proceedings of the Heat Exchanger Fouling Conference, Eng. Foundation, Davos, Switzerland, August 2001
Sadrameli, S. M., “Renewable Energy Projects in Iran”, Training Workshop on Renewable Energy Technologies for Clean Environment and Sustainable Development, 26-29 March 2002, Amman, Jordan
Niaei, A., , Towfighi, J., S. M. Sadrameli, Masoomi, M., Study of the Pyrolysis Reactions and Coke Deposition in Industrial Naphtha Cracking, Lecture notes in the Proceedings of the International Conference on Computational Science-Part I, ICCS, Amsterdam, The Netherlands,  pp. 723-732, 2002.
Niaei, M. Masoumi, J. Towfighi, S. M. Sadrameli, M. Shahrokhi, Computer control pilot plant system for suding of pyrolysis reactions and coke deposition in thermal cracking process -  experimental results, 15th International Congress of Chemical and Process Engineering, 25 - 29 August 2002, Praha, Czech Republic
M. Mofarahi, S. M. Sadrameli, J. Towfighi, Simulation of a Vacuum Pressure Swing Adsorption Process for Propylene/Propane Separation, 54th Canadian Chemical Engineering Conference, Calgary, Alberta, Canada, Oct. 3-6, 2004.

C. Martin, S.M. Sadrameli, Y. Goswami, Comparison of optimum operating conditions for a combined power and cooling thermodynamic cycle, World Solar Energy, Orlando, US, 2005.
M. Mahishi, S. M. Sadrameli, et. al, Hydrogen production from Ethanol: A Thermodynamic Analysis of a Novel Sorbent Enhanced Gasification Process, ASME2005 Conference, Orlando, Florida, US, 2005.
S. M. Sadrameli, A.E.S Green, Modeling Representations of Renewable Olefins from Thermal Cracking of Canola Oil, 4th International Conference on Energy Research & Development (ICERD-4), Nov. 17-19, Kuwait, 2008.