access deny [1420]
 
YEAR TITLE
2023 Application of Phase Change Materials (PCMs) in the Ceiling Fan Ventilation for the Building Thermal Energy Comfort Assessment
SM Sadrameli, M Alizadeh
2023 AIChE Annual Meeting
2023 Dynamic modeling and experimental validation of household refrigerators/freezers equipped with phase change materials towards improved energy efficiency
I Javeri-Shahreza, L Abdolmaleki, SM Sadrameli, M Fakhroleslam
Thermal Science and Engineering Progress, 102227
2023 Application of phase change materials for performance enhancement of open-display supermarket refrigerators: Numerical simulation and parametric study
I Javeri-Shahreza, M Fakhroleslam, SM Sadrameli
Journal of Energy Storage 66, 107506
2023 A novel bio-based phase change material of methyl palmitate and decanoic acid eutectic mixture: Thermodynamic modeling and thermal performance
A Alipour, F Eslami, SM Sadrameli
Chemical Thermodynamics and Thermal Analysis 10, 100111
2023 Optimization study of linseed biodiesel production via in-situ transesterification and slow pyrolysis of obtained linseed residue
A Bahadorian, SM Sadrameli, H Pahlavanzadeh, MNI Kashkouli
Renewable Energy 203, 10-19
2023 Barriers to implementation of phase change materials within solar desalination units: Exergy, thermal conductivity, economic, and environmental aspects review
M Jafaripour, FA Roghabadi, S Soleimanpour, SM Sadrameli
Desalination 546, 116191
2022 Exploring the improvement potentials in an existing industrial olefin plant through advanced exergy-based analyses
M Hamedi, M Omidkhah, SM Sadrameli, MHK Manesh
Journal of Cleaner Production 380, 134927
2022 Bio-gasoline and bio-naphtha production from catalytic cracking of linseed oil methyl ester over iron-and zinc-modified HZSM-5 and γ-Al2O3 catalysts in a fixed double-beds reactor
T Ramezani, SM Sadrameli, A Bayat, AHS Dehaghani
Fuel Processing Technology 238, 107514
2022 Solar water desalination using single-layer solar steam generation systems
M Maleki, F Arabpour Roghabadi, SM Sadrameli
Journal of Energy Management and Technology 6 (4), 241-246
2022 Thermal pyrolysis of linseed waste to produce a renewable biofuel using response surface methodology in a fixed bed reactor
S Mohseni-Roodbari, SAHS Mousavi, SM Sadrameli, H Pahlavanzadeh
Journal of Analytical and Applied Pyrolysis 168, 105701
2022 High-Performance Solar Steam Generator Using Low-Cost Biomass Waste Photothermal Material and Engineering of the Structure
M Maleki, F Arabpour Roghabadi, SM Sadrameli
ACS omega 7 (44), 39895-39906
2022 Catalytic pyrolysis of municipal plastic waste over nano MIL-53 (Cu) derived@ zeolite Y for gasoline, jet fuel, and diesel range fuel production
SAHS Mousavi, SM Sadrameli, AHS Dehaghani
Process Safety and Environmental Protection 164, 449-467
2022 Exergetic, exergoeconomic, and exergoenvironmental analyses of an existing industrial olefin plant
M Hamedi, M Omidkhah, SM Sadrameli, MHK Manesh
Sustainable Energy Technologies and Assessments 52, 102175
2022 Energy recovery from high density polyethylene plastic via pyrolysis with upgrading of the product by a novel nano MIL-53 (Cu) derived@ Y zeolite catalyst using response …
SAHS Mousavi, SM Sadrameli, AHS Dehaghani
Fuel Processing Technology 231, 107257
2022 Water desalination using solar steam generation systems based on graphite photothermal material
F Arabpour Roghabadi, SM Sadrameli
Journal of Applied Research of Chemical-Polymer Engineering 6 (1), 49-61
2022 Performance Improvement of Solar Steam Generation‎ Systems Using the Plasmonic Effect of Titanium Nitride
P Aliakbari, F Arabpour Roghabadi, SM Sadrameli
Journal of Energy Management and Technology
2022 Stability improvement of MAPbI3-based perovskite solar cells using a photoactive solid-solid phase change material
SM Mousavi, M Alidaei, FA Roghabadi, V Ahmadi, SM Sadrameli, ...
Journal of Alloys and Compounds 897, 163142
2022 Preparation and characterization of high temperature shape stable NaNO3/diatomite phase change materials with nanoparticles for solar energy storage applications
S Soleimanpour, SM Sadrameli, SAHS Mousavi, M Jafaripour
Journal of Energy Storage 45, 103735
2021 Experimental investigation for the thermal management of a coaxial electrical cable system using a form-stable low temperature phase change material
M Jafaripour, SM Sadrameli, SAHS Mousavi, S Soleimanpour
Journal of Energy Storage 44, 103450
2021 Experimental and numerical performance evaluation of a cooling vest subtending phase change material under the extremely hot and humid environment
S Yousefi, A Jamekhorshid, S Tahmasebi, SM Sadrameli
Thermal Science and Engineering Progress 26, 101103
2021 Materials and structures engineering of sun-light absorbers for efficient direct solar steam generation
S Karami, FA Roghabadi, M Maleki, V Ahmadi, SM Sadrameli
Solar Energy 225, 747-772
2021 Highly Efficient Solar Steam Generators Based on Multicore@ Shell Nanostructured Aerogels of Carbon and Silica as the Light Absorber− Heat Insulator
S Karami, F Arabpour Roghabadi, F Pashaei Soorbaghi, V Ahmadi, ...
Solar RRL 5 (7), 2100048
2021 Optimization for free glycerol, diglyceride, and triglyceride reduction in biodiesel using ultrafiltration polymeric membrane: Effect of process parameters
K Tajziehchi, SM Sadrameli
Process Safety and Environmental Protection 148, 34-46
2021 Preparation, characterization and thermal properties of surface-modified expanded perlite/paraffin as a form-stable phase change composite in concrete
S Hasanabadi, SM Sadrameli, S Sami
Journal of Thermal Analysis and Calorimetry 144, 61-69
2021 A turbidity titration procedure for the nucleation mechanism determination of sodium sulfate decahydrate (Glauber salt) in unseeded aqueous solution
AK Dehghan, M Manteghian, SM Sadrameli
Journal of Materials Research and Technology 11, 285-300
2021 Effect of working fluid inventory and heat input on transient and steady state behavior of a thermosyphon
SM Sadrameli, D Forootan, F Farajimoghaddam
Journal of Thermal Analysis and Calorimetry 143, 3825-3834
2021 Optimization of energy consumption and temperature fluctuations for a household freezer using non?toxic and non?flammable eutectic phase change materials with a cascade arrangement
A Pirvaram, SM Sadrameli, L Abdolmaleki
International Journal of Energy Research 45 (2), 1775-1788
2021 Fabrication and optimization of kaolin/stearic acid composite as a form-stable phase change material for application in the thermal energy storage systems
M Jafaripour, SM Sadrameli, H Pahlavanzadeh, SAHS Mousavi
Journal of Energy Storage 33, 102155
2020 Thermodynamic and kinetics investigation of homogeneous and heterogeneous nucleation
A Khaleghi, SM Sadrameli, M Manteghian
Reviews in Inorganic Chemistry 40 (4), 167-192
2020 Production of Bio-Gasoline with High Octane Number, as a Renewable Transportation Biofuel, via Thermochemical Conversion of Castor Oil
R Parvizsedghy, M Alibolandi, SM Sadrameli
Iranian Journal of Chemical Engineering (IJChE) 17 (3), 3-23
2020 Production of renewable aromatics and heterocycles by catalytic pyrolysis of biomass resources using rhenium and tin promoted ZSM-5 zeolite catalysts
S Shahsavari, SM Sadrameli
Process Safety and Environmental Protection 141, 305-320
2020 Thermal cracking of hydrocarbons for the production of light olefins; A review on optimal process design, operation, and control
M Fakhroleslam, SM Sadrameli
Industrial & Engineering Chemistry Research 59 (27), 12288-12303
2020 Separation of CO2/N2 mixture by vacuum pressure swing adsorption (VPSA) using zeolite 13X type and carbon molecular sieve adsorbents
M Alibolandi, SM Sadrameli, F Rezaee, JT Darian
Heat and Mass Transfer 56, 1985-1994
2020 Catalytic upgrading of biomass pyrolysis oil over tailored hierarchical MFI zeolite: Effect of porosity enhancement and porosity-acidity interaction on deoxygenation reactions
A Palizdar, SM Sadrameli
Renewable Energy 148, 674-688
2020 Prolonged lifetime of perovskite solar cells using a moisture-blocked and temperature-controlled encapsulation system comprising a phase change material as a cooling agent
N Mansour Rezaei Fumani, F Arabpour Roghabadi, M Alidaei, ...
ACS omega 5 (13), 7106-7114
2020 Catalytic upgrading of beech wood pyrolysis oil over iron-and zinc-promoted hierarchical MFI zeolites
A Palizdar, SM Sadrameli
Fuel 264, 116813
2020 Preparation of macro encapsulated phase change materials for high temperature energy storage applications
SM Sadrameli, S Soleimanpour
TMS 2020 149th Annual Meeting & Exhibition Supplemental Proceedings, 647-655
2020 Application of environmental friendly and eutectic phase change materials for the efficiency enhancement of household freezers
L Abdolmaleki, SM Sadrameli, A Pirvaram
Renewable Energy 145, 233-241
2019 Liquid–liquid equilibria of systems containing linseed oil biodiesel+ methanol+ glycerol: experimental data and thermodynamic modeling
A Asoodeh, F Eslami, SM Sadrameli
Fuel 253, 460-473
2019 Thermal/catalytic cracking of hydrocarbons for the production of olefins; a state-of-the-art review III: Process modeling and simulation
M Fakhroleslam, SM Sadrameli
Fuel 252, 553-566
2019 Energy management of a household refrigerator using eutectic environmental friendly PCMs in a cascaded condition
A Pirvaram, SM Sadrameli, L Abdolmaleki
Energy 181, 321-330
2019 A single-phase transesterification of linseed oil using different co-solvents and hydrogel in the presence of calcium oxide: An optimization study
MH Gargari, SM Sadrameli
Renewable Energy 139, 426-434
2019 Recovering a degraded solar cell
FA Roghabadi, NMR Fumani, M Alidaei, V Ahmadi, SM Sadrameli, ...
US Patent 10,347,432
2019 High power UV-Light Irradiation as a New Method for Defect passivation in Degraded perovskite solar Cells to Recover and enhance the performance
F Arabpour Roghabadi, N Mansour Rezaei Fumani, M Alidaei, V Ahmadi, ...
Scientific reports 9 (1), 9448
2019 An experimental investigation to the thermal conductivity enhancement of paraffin wax as a phase change material using diamond nanoparticles as a promoting factor
SM Sadrameli, F Motaharinejad, M Mohammadpour, F Dorkoosh
Heat and Mass Transfer 55, 1801-1808
2019 A cost-effective form-stable PCM composite with modified paraffin and expanded perlite for thermal energy storage in concrete
S Hasanabadi, SM Sadrameli, H Soheili, H Moharrami, MM Heyhat
Journal of Thermal Analysis and Calorimetry 136, 1201-1216
2019 Optimization of ultrasound-assisted extraction of Moringa peregrina oil with response surface methodology and comparison with Soxhlet method
H Mohammadpour, SM Sadrameli, F Eslami, A Asoodeh
Industrial Crops and Products 131, 106-116
2019 Indoor thermal comfort assessment using PCM based storage system integrated with ceiling fan ventilation: Experimental design and response surface approach
M Alizadeh, SM Sadrameli
Energy and Buildings 188, 297-313
2019 Stability progress of perovskite solar cells dependent on the crystalline structure: From 3D ABX 3 to 2D Ruddlesden–Popper perovskite absorbers
FA Roghabadi, M Alidaei, SM Mousavi, T Ashjari, AS Tehrani, V Ahmadi, ...
Journal of Materials Chemistry A 7 (11), 5898-5933
2018 A comparative study on the modeling of a latent heat energy storage system and evaluating its thermal performance in a greenhouse
A Mirahmad, SM Sadrameli
Heat and Mass Transfer 54, 2871-2884
2018 Glycerin purification using asymmetric nano-structured ceramic membranes from production of waste fish oil biodiesel
M Maghami, SM Sadrameli, M Shamloo
Heat and Mass Transfer 54, 2683-2690
2018 Carbon based material included-shaped stabilized phase change materials for sunlight-driven energy conversion and storage: An extensive review
ST Latibari, SM Sadrameli
Solar Energy 170, 1130-1161
2018 Sulfurous analysis of bioelectricity generation from Sulfate-Reducing Bacteria (SRB) in a microbial fuel cell
M Rahimi, SM Sadrameli, H Mohammadpoor, H Kazerouni, MD Ghaffari
Iranian Journal of Hydrogen & Fuel Cell 4 (4), 307-321
2018 Safety Improvement and Thermal Management of Cylindrical Lithium-Ion Batteries Using Phase Change Materials (PCMs)
SM Sadrameli, Y Azizi
2018 Spring Meeting and 14th Global Congress on Process Safety
2018 Investigating continuous biodiesel production from linseed oil in the presence of a Co-solvent and a heterogeneous based catalyst in a packed bed reactor
MH Gargari, SM Sadrameli
Energy 148, 888-895
2018 Numerical modeling and optimization of thermal comfort in building: central composite design and CFD simulation
M Alizadeh, SM Sadrameli
Energy and Buildings 164, 187-202
2018 An improvement and optimization study of biodiesel production from linseed via in-situ transesterification using a co-solvent
M Taherkhani, SM Sadrameli
Renewable Energy 119, 787-794
2018 Thermal management of photovoltaic solar cells using polyethylene glycol 1000 (PEG1000) as a phase change material
SRM Baygi, SM Sadrameli
Thermal Science and Engineering Progress 5, 405-411
2018 Thermal properties optimization of microencapsulated a renewable and non-toxic phase change material with a polystyrene shell for thermal energy storage systems
S Sami, SM Sadrameli, N Etesami
Applied Thermal Engineering 130, 1416-1424
2018 Investigating the Batch and Continuous Biodiesel Production from Linseed Oil in the Presence of a Heterogeneous Based Catalyst in a Packed Bed Reactor
M Taherkhani, MH Gargari, SM Sadrameli
J. Renew. Sustain. Ener. Environ 4, 1-9
2017 Using heat pipe to make isotherm condition in catalytic converters of sulfuric acid plants
M Yousefi, H Pahlavanzadeh, SM Sadrameli
Heat and Mass Transfer 53, 2693-2700
2017 Corrigendum to “Composite of wood-plastic and micro-encapsulated phase change material (MEPCM) used for thermal energy storage”[Appl. Therm. Eng. 112 (2017) 82–88]
A Jamekhorshid, SM Sadrameli, R Barzin, MM Farid
Applied Thermal Engineering 119, 244
2017 Production of renewable aromatic hydrocarbons via conversion of canola oil methyl ester (CME) over zinc promoted HZSM-5 catalysts
A Bayat, SM Sadrameli
Renewable Energy 106, 62-67
2017 Calculation and prediction of binary mixture flash point using correlative and predictive local composition models
HM Poor, SM Sadrameli
Fluid Phase Equilibria 440, 95-102
2017 Conventional and advanced exergoeconomic analyses applied to ethylene refrigeration system of an existing olefin plant
A Palizdar, SM Sadrameli
Energy Conversion and Management 138, 474-485
2017 Composite of wood-plastic and micro-encapsulated phase change material (MEPCM) used for thermal energy storage
A Jamekhorshid, SM Sadrameli, R Barzin, MM Farid
Applied Thermal Engineering 112, 82-88
2017 Investigating the batch and continuous transesterification of linseed oil by using a alkaline heterogeneous catalyst in a packed bed reactor
MH Gargari, SM Sadrameli, M Taherkhani
Journal of Renewable Energy and Environment (JREE) 4 (2&3), 1-9
2016 Thermal management of a LiFePO4 battery pack at high temperature environment using a composite of phase change materials and aluminum wire mesh plates
Y Azizi, SM Sadrameli
Energy Conversion and Management 128, 294-302
2016 Optimization of Biodiesel Production from Castor Oil Using a Microwave Via Response Surface Methodology (RSM)
M Kord, SM Sadrameli, B Ghobadian
Journal of Renewable Energy and Environment 3 (4), 1-9
2016 Production of green aromatics via catalytic cracking of Canola Oil Methyl Ester (CME) using HZSM-5 catalyst with different Si/Al ratios
A Bayat, SM Sadrameli, J Towfighi
Fuel 180, 244-255
2016 Bound cleavage at carboxyl group-glycerol backbone position in thermal cracking of the triglycerides in sunflower oil
H Seifi, SM Sadrameli
Journal of Analytical and Applied Pyrolysis 121, 1-10
2016 Application of Phase Change Materials for the Safety and Thermal Management of the Lithium-Ion Batteries at High Temperature Climate Conditions
SM Sadrameli, Y Azizi
Electrochemical Society Meeting Abstracts imlb2016, 258-258
2016 Thermal/catalytic cracking of liquid hydrocarbons for the production of olefins: A state-of-the-art review II: Catalytic cracking review
SM Sadrameli
Fuel 173, 285-297
2016 Improvement of renewable transportation fuel properties by deoxygenation process using thermal and catalytic cracking of triglycerides and their methyl esters
H Seifi, SM Sadrameli
Applied Thermal Engineering 100, 1102-1110
2016 Development of free cooling based ventilation technology for buildings: Thermal energy storage (TES) unit, performance enhancement techniques and design considerations–A review
M Alizadeh, SM Sadrameli
Renewable and Sustainable Energy Reviews 58, 619-645
2016 Mathematical models for the simulation of thermal regenerators: A state-of-the-art review
SM Sadrameli
Renewable and Sustainable Energy Reviews 58, 462-476
2016 Modeling of Thermal Cracking Furnaces Via Exergy Analysis Using Hybrid Artificial Neural Network–Genetic Algorithm
M Alizadeh, SM Sadrameli
Journal of Heat Transfer 138 (4)
2016 Liquid–liquid phase equilibrium in ternary mixture of waste fish oil biodiesel–methanol–glycerol: Experimental data and thermodynamic modeling
M Maghami, JY Seyf, SM Sadrameli, A Haghtalab
Fluid phase equilibria 409, 124-130
2016 Upgraded biofuel diesel production by thermal cracking of castor biodiesel
R Parvizsedghy, SM Sadrameli, J Towfighi Darian
Energy & Fuels 30 (1), 326-333
2016 Design and setup of a cooling system using phase change materials (pcms) for the efficiency enhancement of solar panels
S Mousavi, SM SadramelI
MECHANICAL ENGINEERING SHARIF (SHARIF: MECHANICAL ENGINEERING) 323 (1), 77-82
2016 A comprehensive study on a latent heat thermal energy storage system and its feasible applications in greenhouses
A Mirahmad, SM Sadrameli, A Jamekhorshid
IRANIAN JOURNAL OF CHEMICAL ENGINEERING 13 (2), 33-45
2016 Theoretical and experimental studies of a thermal regenerator for heat recovery in aluminum melting furnaces
HRB Ajdari, SM Sadrameli
Light Metals 2015, 439-443
2015 M‌O‌D‌E‌L‌I‌N‌G A‌N‌D S‌I‌M‌U‌L‌A‌T‌I‌O‌N O‌F A L‌A‌T‌E‌N‌T H‌E‌A‌T T‌H‌E‌R‌M‌A‌L E‌N‌E‌R‌G‌Y S‌T‌O‌R‌A‌G‌E S‌Y‌S‌T‌E‌M (L‌H‌T‌E‌S) C‌O‌N‌T‌A‌I‌N‌I‌N‌G P‌H‌A‌S‌E C‌H‌A‌N‌G‌E M‌A‌T‌E‌R‌I‌A‌L‌S
A Mirahmad, SM Sadrameli, H Seifi
Sharif Journal of Mechanical Engineering 31 (2), 33-39
2015 Thermal Cracking Approach Investigation to Improve Biodiesel Properties
R Parvizsedghy, SM Sadrameli
International Journal of Chemical and Molecular Engineering 9 (7), 817-821
2015 Mathematical modelling and simulation of thermal regenerators including solid radial conduction effects
SM Sadrameli, HRB Ajdari
Applied Thermal Engineering 76, 441-448
2015 Production of biodiesel from fishmeal plant waste oil using ultrasonic and conventional methods
M Maghami, SM Sadrameli, B Ghobadian
Applied Thermal Engineering 75, 575-579
2015 Thermal/catalytic cracking of hydrocarbons for the production of olefins: A state-of-the-art review I: Thermal cracking review
SM Sadrameli
Fuel 140, 102-115
2015 MODELING AND SIMULATION OF A LATENT HEAT THERMAL ENERGY STORAGE SYSTEM (LHTES) CONTAINING PHASE CHANGE MATERIALS
A MIRAHMAD, SM SADRAMELI, H SEIFI
MECHANICAL ENGINEERING SHARIF (SHARIF: MECHANICAL ENGINEERING) 313 (2), 33-39
2015 Conversion of canola oil and canola oil methyl ester (CME) to green aromatics over a HZSM-5 catalyst: a comparative study
A Bayat, SM Sadrameli
RSC Advances 5 (36), 28360-28368
2014 Process optimization and modeling of microencapsulated phase change material using response surface methodology
A Jamekhorshid, SM Sadrameli, AR Bahramian
Applied thermal engineering 70 (1), 183-189
2014 Synthetic and physical characterization of phase change materials microencapsulated by complex coacervation for thermal energy storage applications
M Malekipirbazari, SM Sadrameli, F Dorkoosh, H Sharifi
International journal of energy research 38 (11), 1492-1500
2014 Consequence modeling of hazardous accidents in a supercritical biodiesel plant
R Parvizsedghy, SM Sadrameli
Applied thermal engineering 66 (1-2), 282-289
2014 A review of microencapsulation methods of phase change materials (PCMs) as a thermal energy storage (TES) medium
A Jamekhorshid, SM Sadrameli, M Farid
Renewable and Sustainable Energy Reviews 31, 531-542
2014 Theoretical and experimental studies on a latent heat thermal energy storage system (LHTES) containing flat slabs of phase change materials
A Mirahamad, SM Sadrameli, H Seifi
Int. J. Smart Grid Clean Energy 3 (2), 234-240
2013 Separation of CO2/N2 Mixture by Vacuum Pressure Swing Adsorption
F Rezaee, SM Sadrameli, J Towfighi Darian, M Mofarah
Nashrieh Shimi va Mohandesi Shimi Iran 32 (3), 39-45
2013 Preparation of biodiesel using KOH-MWCNT catalysts: an optimization study
M Omraei, S Sheibani, SM Sadrameli, J Towfighi
Industrial & Engineering Chemistry Research 52 (5), 1829-1835
2013 Preparation of Biodiesel Using KOH-MWCNT Catalysts: An Optimization Study
O Mohamad, S Somayeh, SM Sadrameli, T Jafar
 
2013 Development of a molecular kinetic model and tuning of its required kinetic parameters for thermal cracking of light hydrocarbons
H Seifi, SM Sadrameli, J Towfighi
Iranian Journal of Chemical Engineering 10 (2), 203
2012 Simulation of energy storage system with phase change material (PCM)
M Rostamizadeh, M Khanlarkhani, SM Sadrameli
Energy and Buildings 49, 419-422
2012 PREPARATION OF BIODIESEL BY TRANSESTERIFICATION OF CANOLA OIL USING SOLID BASE CATALYST
SM Sadrameli, M Omarei
Energy Technology 2012: Carbon Dioxide Management and Other Technologies, 141
2012 Application of phase change materials (PCMs) in maintaining comfort temperature inside an automobile
A Jamekhorshid, SM Sadrameli
World Academy of Science, Engineering and Technology, International Journal …
2012 Triacylglyceride thermal cracking: pathways to cyclic hydrocarbons
A Kubatova, J S?t’a?vova?, WS Seames, Y Luo, SM Sadrameli, MJ Linnen, ...
Energy & Fuels 26 (1), 672-685
2012 Extraction of Fatty Acids from Noncatalytically Cracked Triacylglycerides with Water and Aqueous Sodium Hydroxide
A Kubtov, D Muggli, W Seames, S Sadrameli, B Tande
Sep. Sci. Technol 47 (6672), 8
2012 Kinetic modeling of sunflower oil methanolysis considering effects of interfacial area of reaction system
BS FARAJZADEH, SM Sadrameli
IRANIAN JOURNAL OF CHEMICAL ENGINEERING 9 (1), 50-59
2012 Extraction of fatty acids from noncatalytically cracked triacylglycerides with water and aqueous sodium hydroxide
S Gandhi, J Kadrmas, J Štávová, A Kubátová, D Muggli, WS Seames, ...
Separation Science and Technology 47 (1), 66-72
2011 New path in the thermal cracking of triacylglycerols (canola and soybean oil)
A Kubátová, Y Luo, J Š?ávová, SM Sadrameli, T Aulich, E Kozliak, ...
Fuel 90 (8), 2598-2608
2011 Effect of process variables on product yield distribution in thermal catalytic cracking of naphtha to light olefins over Fe/HZSM-5
M Alyani, J Towfighi, SM Sadrameli
Korean Journal of Chemical Engineering 28, 1351-1358
2010 The thermal cracking of soybean/canola oils and their methyl esters
Y Luo, I Ahmed, A Kubátová, J Š?ávová, T Aulich, SM Sadrameli, ...
Fuel Processing Technology 91 (6), 613-617
2010 Investigating the effect of key factors, their interactions and optimization of naphtha steam cracking by statistical design of experiments
K Keyvanloo, J Towfighi, SM Sadrameli, A Mohamadalizadeh
Journal of Analytical and Applied Pyrolysis 87 (2), 224-230
2009 Modeling representations of canola oil catalytic cracking for the production of renewable aromatic hydrocarbons
SM Sadrameli, AES Green, W Seames
Journal of Analytical and Applied Pyrolysis 86 (1), 1-7
2008 Prediction of higher heating values for saturated fatty acids from their physical properties
SM Sadrameli, W Seames, M Mann
Fuel 87 (10-11), 1776-1780
2007 Systematics of renewable olefins from thermal cracking of canola oil
SM Sadrameli, AES Green
Journal of Analytical and Applied Pyrolysis 78 (2), 445-451
2007 Optimum operating conditions for a combined power and cooling thermodynamic cycle
SM Sadrameli, DY Goswami
Applied energy 84 (3), 254-265
2006 Simulation, optimization and control of a thermal cracking furnace
ME Masoumi, SM Sadrameli, J Towfighi, A Niaei
Energy 31 (4), 516-527
2005 Systematics and modeling representations of naphtha thermal cracking for olefin production
SM Sadrameli, AES Green
Journal of Analytical and Applied Pyrolysis 73 (2), 305-313
2004 Analytical representations of experimental polyethylene pyrolysis yields
AES Green, SM Sadrameli
Journal of analytical and applied pyrolysis 72 (2), 329-335
2004 The combined simulation of heat transfer and pyrolysis reactions in industrial cracking furnaces
A Niaei, J Towfighi, SM Sadrameli, R Karimzadeh
Applied Thermal Engineering 24 (14-15), 2251-2265
2004 Modeling and simulation of a phase change regenerator system
A Modarresi, SM Sadrameli
Heat transfer engineering 25 (4), 45-53
2004 Simulation of fixed bed regenerative heat exchangers for flue gas heat recovery
MT Zarrinehkafsh, SM Sadrameli
Applied thermal engineering 24 (2-3), 373-382
2004 Modeling and simulation of a side-port regenerative glass furnace
MH Hamzeh, SM Sadrameli
IRANIAN JOURNAL OF CHEMISTRY AND CHEMICAL ENGINEERING (IJCCE) 23 (2), 81-88
2003 Coke deposition by physical condensation of poly-cyclic hydrocarbons in the transfer line exchanger (TLX) of olefin plant
H Manafzadeh, SM Sadrameli, J Towfighi
Applied thermal engineering 23 (11), 1347-1358
2003 Performance Optimization of a Rotary Regenerator Using Experimental Design Analysis
N Ghodsipour, SM Sadrameli, MR Omidkhah
JOURNAL OF FACULTY OF ENGINEERING (UNIVERSITY OF TEHRAN) 36 (478), 555-562
2001 Simulation of coke deposition by physical condensation in the transfer line exchanger of olefin plant
SM Sadrameli, H Manafzadeh, J Toufighi
JOURNAL OF FACULTY OF ENGINEERING (UNIVERSITY OF TEHRAN) 35 (373), 409-420
1988 Effectiveness charts for all modes of operation of counter-current regenerators
PJ Heggs, M Sadrameli
Proceedings of the 2nd UK National Heat Transfer Conference 2, 1359-72
  Thermal Pyrolysis of Linseed Waste in a Fixed Bed Reactor to Produce a Renewable Biofuel Using Response Surface Methodology
S Mohseni-Roodbari, SM Sadrameli, SAHS Mousavi, H Pahlavanzadeh
Available at SSRN 4005117
  Energy Recovery from High Density Polyethylene Plastic Via Pyrolysis with Upgrading of Product by a Novel Nano Mil-53 (Cu) Derived@ Y Zeolite Catalyst Using Response Surface …
SM Sadrameli, SAHS Mousavi, AH Saeedi
FUPROC-D-22-00193
  Preparation and Optimization of Nano-Encapsulated Capric Acid Being as a Renewable Phase Change Material with Tio2 Shell as Shape–Stabilized Thermal Energy Storage Materials
M Nikoonahad, SM Sadrameli, FA Roghabadi
Available at SSRN 3983776
  Transesterification of linseed oil with co-solvent method in presence of base catalyst
MH Gargari, SM Sadrameli, M Taherkhani
 
  Using Phase Change Materials for Thermal Comfort and Energy Savings in Buildings
M Malekipirbazari, M Vaez, H Sharifi, SM Sadrameli
 
  Kinetic Modeling of Biodiesel production Using Ultrasonic Irradiation
SF Bibalan, SM Sadrameli, B Ghobadian, MM Pirbazari
Environmental Sciences 3 (4), 1389
  Experimental and Theoretical Studies of an Ice Storage Regenerator
SM Sadrameli, A Modarresi