Chemical Engineering

  List of Recent Publications (2003-present):
All the papers can be viewed in www.scholar.google.com.
2016
Y. Azizi, S. M. Sadrameli, “Thermal management of a LiFePO4 battery pack at high
temperature environment using a composite of phase change materials and aluminum wire mesh
plates”, Energy Management and Conversion, 128, 294-302, 2016.
A Jamekhorshid, S.M. Sadrameli, R. Barzin, M. Farid, “Composite of Wood-Plastic and Micro-
Encapsulated Phase Change Material (MEPCM) Used for Thermal Energy Storage”, Accepted
for publication in Applied Thermal Engineering, 2016.
H. Seifi, S.M. Sadrameli, Bound cleavage at carboxyl group-glycerol backbone position
in thermal cracking of the triglycerides in sunflower oil, Accepted for publication in
Journal of Applied and Analytical Pyrolysis, 2016
S.M. Sadrameli, Thermal/catalytic cracking of liquid hydrocarbons for the production
of olefins: A state-of-the-art review II: Catalytic cracking review, Fuel, 173, 285-297,
2016.
S. M. Sadrameli, Mathematical Models for the Simulation of Thermal Regenerators: A
state-of-the-art review, Renewable & Sustainable Energy Reviews, 58, 462-476, 2016.
A Bayat, S.M. Sadrameli, J. Towfighi, Production of Green Aromatics via Catalytic
Cracking of Canola Oil Methyl Ester (CME) Using HZSM-5 Catalyst with Different
Si/Al Ratios, Fuel, 180, 244-255, 2016.
H. Seifi, S.M. Sadrameli, Improvement of Renewable Transportation Fuel Properties by
Deoxygenation Process using Thermal and Catalytic Cracking of Triglycerides and their
Methyl Esters, Applied Thermal Engineering, 100, 1102-1110, 2016.
M. Alizadeh, S.M. Sadrameli, Development of Free Cooling Based Ventilation
Technology for Building: Energy Storage Unit, Performance Enhancement Techniques
and Design Considerations-A review, Renewable & Sustainable Energy Reviews, 58,
619-645, 2016.
M. Alizadeh, S.M. Sadrameli, Modeling of Thermal Cracking Furnaces via Exergy
Analysis Using Hybrid Artificial Neural Network–Genetic Algorithm, ASME, Journal of
Heat Transfer, 318(4), 324-334, 2016.
M. Maghami, J. J. Yousefi, S.M. Sadrameli, A. Haghtalab, Liquid-Liquid Phase
Equilibrium in Ternary Mixture of Waste Fish Oil Biodiesel-Methanol-Glycerol:
Experimental Data and Thermodynamic Modeling, Fluid Phase Equilibria, 409, 124-
130, 2016.
R. Parvizsedghy, S.M. Sadrameli, J. Towfighi, Upgraded biofuel diesel production by
thermal cracking of Castor biodiesel, Energy and Fuels, 30(1), 326-333, 2016.
A. Mirahmad, S.M. Sadrameli, A. Jamekhorshid, A Comprehensive Study on a Latent
Heat Thermal Energy Storage System and its Feasible Applications in Greenhouses,
Iranian Journal of Chemical Engineering, 13(2), 61-73, 2016.
A. Mirahmad, S.M. Sadrameli, H. Seifi, Modeling and Simulation of a Latent Heat
Thermal Energy Storage System (LHTES) Containing Phase Change Materials, Sharif
Journal of Mechanical Eng., 31-3(2), 33-39, 2016.
ژی  زی ا  ه  ه ذ  د 
 دی و   !"     ،
#  ،
 ر

 
 ،  ا    

١٣٩۴ ،٣٣- ٣، ص. ٢٩ - ره ٣٢ % ، &% '    
()     * ز، + , اد -     وی 
    .
ز + , اد -      ه %6
 ار  ل 8      زی  8% دی و   !"     ،
 ر

 
 ،  ا    

9     و
()     * ان،  ا * م و . <"(     در
-'=     ن   ع -8"     -)      ای 
١٣٩۴ ،۵١- ره ٣، ص. ۴٢ % ل ۵،  ژی،  ا
ن      را B اC+ ا 9)D ه ((E (       9 و
 ا ، ط
 ر


 ؛
 ی --     @ ر
١٣٩۵ ،٣٣- ٣، ص. ٢٩ - ره ٣٣ % ، &% '    
()     * ز، + , اد -     E  ! و-+ ی  ھG(6
2015
S. M. Sadrameli, Thermal/Catalytic Cracking of Hydrocarbons for the Production of
Olefins: A state-of-the-art review I: Thermal cracking review, Fuel, 140, 102-115, 2015.
A Bayat, S.M. Sadrameli, Conversion of Canola oil and Canola oil Methyl Ester (CME)
to Green Aromatics over a HZSM-5 Catalyst: a Comparative Study, RSC Advances, 5,
28360-28368, 2015.
S. M. Sadrameli, H. Ajdari, Mathematical Modeling and Simulation of Thermal
Regenerators Including Solid Radial Conduction Effects, Applied Thermal Engineering,
76, 441-448, 2015.
M. Maghami, S. M. Sadrameli, B. Ghobadian, Production of Biodiesel from Fishmeal
Plant Waste Oil Using Ultrasonic and Conventional Methods, Applied Thermal
Engineering, 75, 575-580, 2015.
ل) از C د- (
= ل ز C د !- ، -    % @ ر L     ن،  د8M ات  ،
 ر

 
 ری، I ی ا )    
١٣٩۴ ،٣١- ره اول، ص. ٢۴ % ، O(6 ل  ژی،  ا 9     و
()     * ر، - ت دام و ط  @
2014
A. Jamekhorshid, S. M. Sadrameli, A. Bahramian, Process Optimization and Modeling
of Microencapsulated Phase Change Material Using Response Surface Methodology,
Applied Thermal Engineering, 70, 183-189, 2014.
R. Parvizsedghy, S. M. Sadrameli, Consequence Modeling of Hazardous Accidents in a
Supercritical Biodiesel Plant, Applied Thermal Engineering, 66(1-2):282-289, 2014.
A. Jamekhorshid, S. M. Sadrameli, M. Farid, A Review of Microencapsulation Methods
of Phase Change Materials (PCMs) as a Thermal Energy Storage (TES) Medium,
Renewable & Sustainable Energy Reviews, 32(3):531-542, 2014.
M. Maleki, S. M. Sadrameli, F. Dorkoosh, H. Sharifi, Synthetic and physical
characterization of phase change materials microencapsulated by complex coacervation
for thermal energy storage applications, Int. J. Energy Research, 38(11):1492-1500,
2014.
Mirahmad A., S.M. Sadrameli, H. Seifi, Theoretical and Experimental Studies on a
Latent Heat Thermal Energy Storage System (LHTES) Containing Flat Slabs of Phase
Change Materials, International of Journal of Smart Grid and Clean Energy, 3(2):234-
240, 2014.
9     و
()     * ،
 (P ی  ره ھ -E
D BQ زی =!     ،
 ر

 
 ،
( ز

١٣٩٣ ،٣٣- م، ص. ٢۶ - ره % م، - ل  ژی،  ا
2013
H. Seifi, S. M. Sadrameli, J. Towfighi, Development of a molecular kinetic model and
tuning of its required kinetic parameters for thermal cracking of light hydrocarbons,
Iranian Journal of Chemical Engineering, 10(2):33-54, 2013.
M. Omraei, S. Sheybani, S. M. Sadrameli, J. Towfighi, Preparation of Biodiesel Using
KOH-MWCNT Catalysts: An 2 Optimization Study, Ind. & Eng. Chem., 52(5):1829–
1835, 2013.
2012
S. Farajzadeh Bibalan, S. M. Sadrameli, Kinetic Modeling of Sunflower oil
Methanolysis Considering the Effects of Interfacial Area Reaction System, Iranian
Journal of Chemical Engineering, 9(1):50-59, 2012.
M. Rostamizadeh, M. Khanlarkhani, S. M. Sadrameli, Simulation of energy storage
system with Phase Change Materials (PCMs), Energy and Buildings, 49, pp. 419-422,
2012.
Alena Kubátová, Jana Št’ávová, Wayne S. Seames, Yan Luo, S. M. Sadrameli, Michael
J. Linnen Ganna V. Baglayeva, Irina P. Smoliakova, and Evguenii I. Kozliak,
Triacylglyceride Thermal Cracking: Pathways to Cyclic Hydrocarbons, Energy and
Fuels, 26(1):672-685, 2012.
Swapnil Gandhi, Julie Kadrmas, Jana Šťávová, Alena Kubátová, Darrin Muggli, Wayne
S. Seames, S.M. Sadrameli, and Brian M. Tande, Extraction of fatty acids from
noncatalytically cracked triacylglycerides: 1. Extraction with water and aqueous sodium
hydroxide, J. Separation and Science Tech., 47(1):66-72, 2012.
2003-2011
Maleki M., Vaez M., Sharifi H., S. M. Sadrameli, Using Phase Change Materials for
Thermal Comfort and Energy Savings in Buildings, International Geoinformatics
Research and Development Journal, 2(4):21-29, 2011.
Alena Kubátová, Yan Luo, Jana Šťávová, S.M. Sadrameli, Ted Aulich, Evguenii
Kozliak, Wayne Seames, New path in the thermal cracking of triacylglycerols (canola
and soybean oil), Fuel, 90(8): 2598-2608, 2011.
M. Alyani, J. Towfighi, S.M. Sadrameli, Effect of process variables on product yield
distribution in thermal catalytic cracking of naphtha to light olefins over Fe/HZSM-5,
Korean Journal of Chemical Engineering, 28(6):1351-1358, 2011.
Yan Luo, Irshad Ahmed, Alena Kubátová, Jana Šťávová, Ted Aulich, S.M. Sadrameli,
W.S. Seames, The thermal cracking of soybean/canola oils and their methyl esters, Fuel
Proc. Tech., 91(6): 613-617, 2010.
Keyvanloo, K., J. Towfighi, S. M. Sadrameli, Investigating the Effect of Key Factors,
their Interactions and Optimization of Naphtha Steam Cracking by Statistical Design of
Experiments, Journal of Analytical and Applied Pyrolysis, 87(2):224-230, 2010.
S. M. Sadrameli, A.E.S Green, Modeling Representations of Canola Oil Catalytic
Cracking for the production of Renewable Aromatics, Journal of Analytical and
Applied Pyrolysis, 86(1):1-7, 2009.
S. M. Sadrameli, W. Seames, M. Mann, Prediction of higher heating values for saturated
fatty acids from their physical properties, Fuel, 87(10/11):1776-1781, 2008.
M. R. Mahishi, S. M. Sadrameli, S. Vijayaraghavan, Y. Goswami, A Novel Approach to
Enhance the Hydrogen Yield of Biomass Gasification Using CO2 Sorbent, ASME Journal
of Eng. for Gas Turbines and Power, 130(011501):1-8, 2008.
S. M. Sadrameli, A.E.S Green, Systematics of Renewable Olefins from Thermal
Cracking of Canola Oil, Journal of Analytical and Applied Pyrolysis, 78(2):445-451,
2007.
S. M. Sadrameli, Y. Goswami, Optimum Operating Conditions for a Combined Power
and Cooling Thermodynamic Cycle, Applied Energy, 84(3):254- 265, 2007.
M. E. Masoomi, M. Shahrokhi, S. M., Sadrameli, J. Towfighi, Modeling and Control of
a Naphtha Thermal Cracking Pilot Plant, Ind. Eng. Chem. Res, 45(10):3574-3582, 2006.
M. E. Masoomi, S. M., Sadrameli, Towfighi, Simulation, Optimization and Control of
Thermal Cracking Pilot Plant Furnace, Energy, 31(4):516-527, 2006
S. M. Sadrameli, A.E.S. Green, Systematics and modeling representations of naphtha
thermal cracking for olefins production, Journal of Analytical and Applied Pyrolysis,
73(2):305-313, 2005.
M. Mofarahi, S. M. Sadrameli, Towfighi, J., Four-Bed Vacuum Pressure Swing
Adsorption Process for Propylene/Propane Separation, Ind. & Eng. Chem. Res.
44(5):1557-1564, 2005.
A.E.S. Green, S. M. Sadrameli, Analytical Representations of Experimental Results for
Polyethylene Pyrolysis Yields, Journal of Analytical and Applied Pyrolysis, 72 (2):329-
335, 2004
A. Modaresi, S. M. Sadrameli, Modeling and Setup of a Cooling Energy Storage System,
Heat Transfer Engineering, An International Journal, Taylor and Francis, 25 (4),
2004.
M. H. Hamzeh, S. M. Sadrameli, Modeling and Simulation of a side-port regenerative
glass Furnace, Iranian Journal of Chemistry and Chemical Eng, 23(2):81-88, 2004
A.Niaei, J. Towfighi, S. M. Sadrameli, The combined simulation of heat transfer and
pyrolysis reaction in industrial cracking furnaces, Applied thermal Engineering, 24(14-
15):2251-2265, 2004.
A.ZarrineKafsh, S. M. Sadrameli, Simulation of Fixed-bed Regenerative heat
exchangers for Flue gas Heat Recovery, Journal of Applied Thermal Engineering, 24 (2-
3):373-382, 2004.
M. Mofarahi, S. M. Sadrameli, J. Towfighi, Characterization of activated carbon by
propane and propylene adsorption, Journal of Chemical Engineering and Data, ACS,
48(5):1256-1261, 2003
A. Manafzadeh, S. M. Sadrameli, J. Towfighi, Coke deposition by physical condensation
of poly-cyclic hydrocarbons in the transfer line exchanger (TLX) of ethylene plant,
Journal of Applied Thermal Eng.Engineering, Elsevier, vol. 23(11):1347-1358, 2003.
S. M. Sadrameli, et.al., Dynamic Simulation of Demethanizer Column, Petroleum
Technology Quarterly, Spring issue, pp. 111-115, 2003.
N. Ghodsipoor, S. M. Sadrameli, Experimental and Sensitivity Analysis of a Rotary Air
Pre-heater for the Flue Gas Heat Recovery, Applied Thermal Engineering, Elsevier,
23(5):571-580, 2003.
N. Tabrizi, S. M. Sadrameli, Modeling and Simulation of A Fixed bed Regenerator
Utilizing PCM materials , International Journal of Energy Research, 27(4):431-440,
2003.
M. E. Masoomi, S. M. Sadrameli, J. Towfighi, Simulation and Optimization of a
Naphtha Thermal Cracking Pilot Plant, Iranian Journal of Chemistry and Chemical
Eng., 22(1), 2003.
A, Niaei, J. Towfighi, S. M. Sadrameli, Prediction of Furnace Run Length for the
Pyrolysis on Naphtha by a PC-Based Simulator, Scientia Iranica, 10(3), 2003.
SH. Ebn Jalal, S. M. Sadrameli, E. Vasheghani, Simulation and sensitivity analysis of
hydrogen purification in PSA unit of ethylene plant, Amirkabir Journal of
Engineering, 14(53):58-70, 2003.
A.Niaei, S.M. Sadrameli, J. Towfighi, Coke Formation Mechanisms and Coke Inhibiting
Methods in Pyrolysis Furnaces, Journal of Chemical Eng. of Japan, 35(10), 923-937,
2002.
Books:
Sadrameli, M., Simulation of a Cryogenic Fixed bed Regenerator for Energy Recovery,
MSc thesis, University of Leeds, Leeds 1984.
Sadrameli, M., Investigation of Asymmetric and Unbalanced Regenerators, Ph.D. thesis,
University of Leeds, Leeds, U.K., 1988
Sadrameli, M., Industrial Heat Recovery Systems, A Book published by The Ministry of
Energy, Iran, 1997.
Sadrameli, M. Heat Conduction, Farsi translation of the book entitled Heat Conduction
by: S. Kakac and Y. Yener, 2000.
Sadrameli, M. Pazuki, H., Advanced Heat Transfer, in Farsi, Milad Pub., Iran, 2001
List of Recent Presentations:
Sadrameli S. M., et al, Fouling in Transfer line of Ethylene Plant by Physical
condensation, Proceedings of the Heat Exchanger Fouling Conference, Eng.
Foundation, Davos, Switzerland, August 2001
Sadrameli, S.M., “Renewable Energy Projects in Iran”, Training Workshop on
Renewable Energy Technologies for Clean Environment and Sustainable
Development, 26-29 March 2002, Amman, Jordan
Niaei, A., , Towfighi, J., S. M. Sadrameli, Masoomi, M., Study of the Pyrolysis
Reactions and Coke Deposition in Industrial Naphtha Cracking, Lecture notes in the
Proceedings of the International Conference on Computational Science-Part I, ICCS,
Amsterdam, The Netherlands, pp. 723-732, 2002.
Niaei, M. Masoumi, J. Towfighi, S.M. Sadrameli, M. Shahrokhi, Computer control pilot
plant system for suding of pyrolysis reactions and coke deposition in thermal cracking
process - experimental results, 15th International Congress of Chemical and Process
Engineering, 25 - 29 August 2002, Praha, Czech Republic
M. Mofarahi, S.M. Sadrameli, J. Towfighi, Simulation of a Vacuum Pressure Swing
Adsorption Process for Propylene/Propane Separation, 54th Canadian Chemical
Engineering Conference, Calgary, Alberta, Canada, Oct. 3-6, 2004.
C. Martin, S.M. Sadrameli, Y. Goswami, Comparison of optimum operating conditions
for a combined power and cooling thermodynamic cycle, Proceedings of SWC2005,
Solar World Congress, August, 14-17, Orlando, USA, 2005.
M. Mahishi, S.M. Sadrameli, et. al, Hydrogen production from Ethanol: A
Thermodynamic Analysis of a Novel Sorbent Enhanced Gasification Process,
Proceedings of IMECE05, 2005 ASME Int. Mech. Eng. Congress, and Exposition,
Nov. 5-11, Orlando, Florida, USA, 2005.
S. M. Sadrameli, A.E.S Green, Modeling Representations of Renewable Olefins from
Thermal Cracking of Canola Oil, 4th International Conference on Energy Research &
Development (ICERD-4), Nov. 17-19, Kuwait, 2008.
S. M. Sadrameli, A. Modarresi, Experimental and Theoretical Studies of an Ice Storage
Regenerator System, Seventh Jordanian International Mechanical Engineering
Conference, JIMEC’7, Sept. 27-29, Amman, Jordan, 2010.
M. Maleki, S.M. Sadrameli, F. Dorkoosh, Preparation and Characterization of Microcapsules
as Phase Change Materials For Thermal Energy Storage, 10th Int. Conf. for
Enhanced Building Operations, ICEBO 2010, Oct. 26-28, Kuwait, 2010.
S. Farajzadeh, S. M. Sadrameli, Kinetic modeling of corn oil methanolysis considering
the effect of interfacial area of reaction system, 2nd Int. Conference on Chemical
Engineering and Advanced Materials, CEAM 2010-VF, Nov. 15-26, 2010.
M. Maleki, S. M. Sadrameli, F. Dorkoosh, Microencapsulation of Phase Change
Materials by Complex Coacervation for Thermal Energy Storage Systems, 20th Int.
Conference on Management of Technology, Miami, Florida, USA, 10-14 April 2011.
S. M. Sadrameli, M. Omraei, Production of biodiesel by transestrification of canola oil
using solid base catalyst KOH/g-Al2O3, TMS 2012, 141st Annual Meeting and
Exhibition, Orlando, Fl, USA, 11-15 March 2012.
A.Mirahmad, S. M. Sadrameli, Theoretical and Experimental Studies on a Latent Heat
Thermal Energy Storage System (LHTES) containing flat slabs of Phase Change
Materials, 2013 International Conference on Smart Grid and Clean Energy Technologies,
ICSGCE 2013, 11-13 October 2013, Kuala Lumpur, Malaysia.
S.M. Sadrameli, H.R.B. Ajdari, Theoretical and Experimental Studies of a Fixed Bed
Regenerator for Heat Recovery in Aluminum Furnaces, TMS 2015, Light Metals,
Orlando, Fl, USA, 15-19 March 2015.