En
  • دکتری (1389)

    مهندسی صنایع

    دانشگاه تربیت مدرس،

  • کارشناسی‌ارشد (1383)

    مهندسی صنایع، مهندسی سیستمهای اقتصادی اجتماعی

    دانشگاه تهران، ایران

  • کارشناسی (1381)

    ریاضی کاربردی

    دانشگاه صنعتی خواجه نصیرالدین طوسی،

  • (1) حوزه مدیریت و مهندسی کیفیت
  • مهندسی و کاهش هزینه در سیستم های تولید، خدماتی و بنگاه ها
  • رویکرد ناب سازی، خطاناپذیری (Zero Defect and Poka Yoke)، شش سیگما، تحلیل خطاها
  • انقلاب صنعتی چهارم (Industry 4.0)
  • چارچوب ها، سیستم ها و استانداردهای مدیریت کیفیت
  • مدلهای تعالی، بلوغ و عملکرد سازمانی
  • (2) حوزه مدیریت فرایند
  • مدلسازی و شبیه سازی داده محور فرایند
  • مهندسی و طراحی مجدد فرآیند، ساختار، قابلیت ها و تعالی سازمانی
  • قابلیت و عملکرد فرایند
  • کاربردهای مدلسازی تحلیل پوششی داده (DEA)، شبیه سازی مونت کارلو و شی گرا در مدیریت فرایند
  • چارچوب ها، سیستم ها و استانداردهای مدیریت فرایند
  • (3) حوزه مدیریت ریسک
  • تکنیک های کمی و تحلیلی مدیریت ریسک
  • ارزیابی ریسک داده محور
  • مدلسازی ارزش در معرض خطر (VaR) و مشتقات ان
  • کاربردهای مدلسازی تحلیل پوششی داده (DEA)، شبیه سازی مونت کارلو و شی گرا در مدیریت ریسک
  • مهندسی تاب آوری (Resilience Engineering)
  • مدلهای بلوغ مدیریت ریسک
  • چارچوب ها، سیستم ها و استانداردهای مدیریت ریسک و تداوم کسب و کار (BCM)
  • (4) حوزه قابلیت اطمینان
  • مهندسی قابلیت اطمینان (Reliability and Resilient engineering)
  • مهندسی قابلیت اعتماد (Dependability Engineering)
  • تشخیص و تحلیل حالت های خرابی (Failure Detection and Analysis)
  • چارچوب ها، سیستم ها و استانداردهای قابلیت اطمینان و RAMS
  • (5) حوزه مشتری، بازاریابی و قیمت گذاری
  • تکنیک های کمی و تحلیلی در بازاریابی، تجربه و ارزش مشتری
  • استرتژی ها و مدلهای قیمت گذاری در بازارها

    دکتر بختیار استادی مدرک کارشناسی خود را در رشته ریاضیات کاربردی در سال 1381 از دانشگاه صنعتی خواجه نصیرالدین طوسی و مدارک کارشناسی ارشد و دکتری خود را در رشته مهندسی صنایع در سال های 1383و 1389 از دانشگاه تهران و دانشگاه تربیت مدرس به ترتیب اخذ نمود. وی هم اکنون عضو هیات علمی و مدیر گروه مدیریت سیستم و بهره وری دانشگاه است. حوزه های اصلی تحقیقاتی ایشان عبارتند از: مدیریت و مهندسی کیفیت، مدیریت فرایند، مدیریت ریسک، مهندسی قابلیت اطمینان و نیز حوزه ارزش مشتری، بازاریابی و قیمت گذاری است. همچنین مقالات متعددی در نشریات و کنفرانس های داخلی و خارجی معتبر به چاپ رسانده اند.

    ارتباط

    رزومه

    A hybrid approach for joint optimization of base and extended warranty decisions considering out-of-warranty products

    Mohsen Afsahi, Ali Husseinzadeh Kashan, Bakhtiar Ostadi
    Journal PapersApplied Mathematical Modelling , 2021 February 11, {Pages }

    Abstract

    In practice, manufacturers who offer base and extended warranty should make simultaneous decisions on product pricing, spare part pricing for out-of-warranty products, base and extended warranty policy, and spare part inventory management. Previous studies neither considered the influence of out-of-warranty products as one of the main sources of manufacturers’ profit nor optimized these decisions in an integrated model. In this paper, these challenges are addressed by introducing an optimization model to maximize the manufacturer's profit. A new math-heuristic algorithm is proposed for solving the model using the hybridization of metaheuristic algorithms with a developed dynamic programming algorithm. To generate a new solution within the

    A novel hybrid GA-PSO optimization technique for multi-location facility maintenance scheduling problem

    Omid Motamedi Sedeh, Bakhtiar Ostadi, Farank Zagia
    Journal PapersJournal of Building Engineering , 2021 March 6, {Pages 102348 }

    Abstract

    Nowadays, due to increasing the construction cost and limiting the workforce and capital of organizations, the role of maintenance activity and management to maintain the facilities and improve their performance has become more important for all the facilities. Most of the facility life cycle consists of several stages including planning, designing, operation, maintenance, and destruction which most of the time and cost have been spent on the operation and maintenance stages. In this article a new mathematical model has been proposed to optimize multi location facility maintenance scheduling problem. In proposed model combination of Genetic Algorithm and the Particle Swarm Optimization has been adopted to solve problems for organizations wi

    A multi-objective model for resource allocation in disaster situations to enhance the organizational resilience and maximize the value of business continuity with considering?…

    Bakhtiar Ostadi, Mohammad Mahdi Seifi, Ali Husseinzadeh Kashan
    Journal PapersProceedings of the Institution of Mechanical Engineers, Part O: Journal of Risk and Reliability , 2021 February 5, {Pages 1748006X21991027 }

    Abstract

    Industry-related risks are increasing due to the growing expansion of industries. Each of these risks can have a natural origin (such as earthquakes, flood, and fire) or human origin (such as terrorist attacks, contagious diseases, and intentional or inadvertent mistakes of staff). In this regards, business Continuity Management (BCM) is a comprehensive method to identify risks and reduce the consequent impacts on the organizations’ activities. Essential aspects of BCM includes retrieval of products after disruptive events and resource allocation. Obviously, in each organization, the fundamental objective is to allocate the least amount of resources for retrieving operations and minimizing costs, as well as, restoring activities to the to

    A bi-objective simulation-based optimization approach for optimizing price, warranty, and spare part production decisions under imperfect repair

    Mohsen Afsahi, Ali Husseinzadeh Kashan, Bakhtiar Ostadi
    Journal PapersInternational Journal of Information Technology & Decision Making , 2021 March 2, {Pages }

    Abstract

    This paper proposes an efficient methodology based on the Monte-Carlosimulationbased bi-objective optimization, to determine base-warranty and extended warranty parameters based on the product lifecycle. The first objective, which is from the manufacturer’s perspective, maximizes the profit while the second objective minimizes the expected number of failures that occurred during the out-of-warranty period. The manufacturer can rectify failed products via minimal repair, imperfect repair and perfect repair. The optimization model has decision variables including the product price, base warranty length, extended warranty length, extended warranty price, product failure rate, imperfect repair level, and spare part production rate in each tim

    A Three-Stage Optimization Model for Scheduling the Facilities Maintenance Considering Random Failure Rate

    F Zagia, O Motamedi Sedeh, B Ostadi
    Journal Papers , , {Pages }

    Abstract

    A two-stage reliability optimization approach for solving series–parallel redundancy allocation problem considering the sale of worn-out parts

    B Ostadi, R Hamedankhah
    Journal Papers , , {Pages }

    Abstract

    Identification and Prioritization of performance evaluation indicators of knowledge-based companies

    B Ostadi, M Sadri
    Journal Papers , , {Pages }

    Abstract

    A multi-objective model for resource allocation in disaster situations to enhance the organizational resilience and maximize the value of business continuity with considering …

    B Ostadi, MM Seifi, A Husseinzadeh Kashan
    Journal Papers , , {Pages }

    Abstract

    Risk-based optimal bidding patterns in the deregulated power market using extended Markowitz model

    Bakhtiar Ostadi, Omid Motamedi Sedeh, Ali Husseinzadeh Kashan
    Journal PapersEnergy , Volume 191 , 2020 January 15, {Pages 116516 }

    Abstract

    Deregulation of power industry has entailed important changes in the energy market. With the power industry being restructured, a generation company (GenCo) sells energy through auctions in a daily market, and submission of the appropriate amount of electricity with the right bidding price is important for a GenCo to maximize their profits and minimize the acceptance risk. The objective of this paper is to propose a novel approach for determination of the optimal biding patterns among GenCos in the deregulated power market using a hybrid of Markowitz Model and Genetic Algorithm (GA). While Markowitz Model as an optimization model considers the risk premium for biding patterns and GA as a search engine, considering the acceptance risk in der

    An Assessment Model for Hospital Resilience according to the Simultaneous Consideration of Key Performance Indicators: A System Dynamics Approach

    Mohammad Pishnamazzadeh, Mohammad Mehdi Sepehri, Bakhtiar Ostadi
    Journal PapersPerioperative Care and Operating Room Management , 2020 May 28, {Pages 100118 }

    Abstract

    BackgroundGlobalization allows the effects of disruptions to cascade in the systems rapidly and a small disruption could lead to a broad catastrophe. Nowadays, disruptions are becoming more unpredictable, more frequent and more damaging. Hospitals are critical facilities which play an important role after disruptions. Number of deaths and injuries from disasters depends heavily on how hospitals serve people. Therefore, assuring the proper performance of hospitals under disruption is an important issue. Our approach to improve hospital performance is modelling the performance from resilience engineering perspective.MethodsFirst step towards building or designing a resilient organization is assessment and based on that a set of strategies or

    Reliability and Risk Assessment of Electric Cable Shovel at Chadormalu Iron Ore Mine in Iran

    Mohammad Hosein Basiri, Mohammad Reza Sharifi, Bakhtiar Ostadi
    Journal PapersInternational Journal of Engineering , Volume 33 , Issue 1, 2020 January 1, {Pages 170-177 }

    Abstract

    Nowadays, shovels play an important role in production of open pit mines and their failures result in significant production loss and considerable increase in maintenance costs. Therefore, reliability and risk analysis can help to improve production, productivity and reduce production costs. In this study, reliability of electric cable shovel of Chadormalu iron ore mine in Iran was investigated. Failure distribution function of the subsystems whose failure information is available was provided by statistical analysis using EasyFit 5.5, Minitab 18 and the subsystems with low or unavailable failure information which was generated by experts using normal distribution function. Criticality of subsystems was determined using Birnbaum and Fussell

    Process capability studies in an automated flexible assembly process: A case study in an automotive industry

    Bakhtiar Ostadi, Mohammad Reza Taghizadeh Yazdi, Abdolkarim Mohammadi Balani
    Journal PapersIranian Journal of Management Studies , 2020 June 16, {Pages }

    Abstract

    Statistical Process Control (SPC) methods can significantly increase organizational efficiency if appropriately used. The primary goal of process capability studies is to obtain critical information about processes to render them even more effective. This paper proposes a comprehensive framework for proper implementation of SPC studies, including design of the sampling procedure and intervals as well as process capability indices. Some of the most essential process capability indices in the literature were reviewed to develop a methodology to utilize process capability indices within the SPC framework. The current study presents an efficiency-oriented criterion designed for measuring SPC implementation productivity. The framework is applied

    A quantitative target-setting model using Monte Carlo simulation method: mapping in strategic management and balanced scorecard (BSC) context

    Bakhtiar Ostadi, Zahra Honarmand Shahzileh, Aboutaleb Gerami
    Journal PapersJournal of Statistical Computation and Simulation , 2020 June 12, {Pages 17-Jan }

    Abstract

    Simply defining a measure tells us how we will measure performance, but it does not communicate the expected level of improvement. Target-setting is a strategic process to establish performance goals for organizations. This paper helps to appropriately quantify the strategy map via determining the interactions among the strategic objectives in different layers of the strategic map -weak or strong- and setting an achievable target per measure. To achieve this, a comprehensive model based on Monte Carlo simulation is presented. The proposed model contributes to setting objectives as well as quantifying the strategy map with a focus on targeted strategic objectives of the lower to the upper layers of the strategy map. The latter leads to the f

    A method to calculate the acceptance probability and risk of rejection of bid prices on the electricity market

    Bakhtiar Ostadi, Sokoufeh Ghaffari, Mohammad Ali Rastegar
    Journal PapersIranian Electric Industry Journal of Quality and Productivity , Volume 9 , Issue 2, 2020 June 10, {Pages 55-59 }

    Abstract

    After restructuring, Iran’s electricity market has become one of the most competitive markets in which generation companies offer their proposed price on several price benches. So, the decisions in this market can use statistical concepts. In this paper, a conceptual model is presented according to simultaneous analysis of probabilistic distribution for historical data of market clearing price and frequency of acceptance of bids. Based on this model, the probable value of market clearing price is measured through the risk of historical data price intervals and the decision is made about bidding strategy. Also, a method is proposed to calculate the probability of acceptance and risk of rejection of bids on the electricity market. The data

    Optimization of bidding strategy in the day-ahead market by consideration of seasonality trend of the market spot price

    Omid Motamedi Sedeh, Bakhtiar Ostadi
    Journal PapersEnergy Policy , Volume 145 , 2020 October 1, {Pages 111740 }

    Abstract

    Due to the liberalization of the electricity market, evaluation of competitor behaviors, as an uncertainty factor, is a critical information for a Generation Company (GenCo) to maximize its profit by optimizing bidding strategies. In this paper, a new bidding strategy model has been presented based on the Genetic Algorithm and a refined Monte Carlo simulation model. This process is done through the similarity function and consideration of the seasonality trend as the main characteristic of the electricity spot price. The main contributions of this paper include: (a): Consideration of the similarity value for all days in historical dates in the database, (b): Consideration of the seasonality trend of market clearing price by applying K-Means

    A novel risk assessment approach using Monte Carlo simulation based on co-occurrence of risk factors: A case study of a petrochemical plant construction

    Bakhtiar Ostadi, Sara Abbasi Harofteh
    Journal PapersScientia Iranica , 2020 August 3, {Pages }

    Abstract

    Nowadays, because of the advancement of technology and subsequently unpredictable events, it is important for addressing risk management as an important part of projects and business. In this paper, a novel approach based on Monte Carlo simulation has been proposed for risk assessment, which considers the co-occurrence of risks. In this method, the output of extended and classic Monte Carlo simulation is applied for co-occurrence-based risk assessment (CORA) and prioritization. Also, the magnitude in each source of uncertainty has been determined by a new approach. The proposed model investigates risk’s relationship and determines the type of effect as resonance or reduction in addition to identifying and analyzing the risks. Also, a syst

    Identification and prioritisation the critical activities of the emergency department using business continuity management concept

    Bakhtiar Ostadi, Mehdi Alibakhshi, Mohammad Mehdi Sepehri
    Journal PapersInternational Journal of Business Excellence , Volume 22 , Issue 1, 2020 January , {Pages 98-113 }

    Abstract

    Supporting critical activities and key process in the unmoral situation is important success factor to any organisations and emergency department (ED) as one of the most important parts of the hospital. The aim of this paper is to identify and prioritise ED critical activities by using business continuity management (BCM) approach. For this purpose, preliminary ten main activities in ED were identified based on the patient flow mapping through using BPMN standard and literature review and experts judgement. Then, analytical hierarchy process (AHP) has been used to assess the identified ten activities of ED and to find their priorities in according to major criteria of criticality of an activity. Ten preliminary activity were refined and val

    Evaluating and prioritizing the failure factors and cause of delays in IT projects using FMEA: Towards project continuity

    Parisa Gharibnejad, Bakhtiar Ostadi
    Journal PapersJournal of Industrial and Systems Engineering , Volume 13 , Issue 1, 2020 October 26, {Pages }

    Abstract

    Today, the use of information technology and software applications in organizations is inevitable. To maintain competitiveness, companies need to define different projects in IT areas and also need to keep the risk level of the defined projects at an acceptable level. In this paper, it has been tried to develop a framework for assessing the readiness of IT projects by using the relationship between concepts of business continuity management and project management. Therefore, by reviewing the literature on causes of delays and failure factors in IT projects, as well as interviews with some experts and business continuity consultants, essential criteria for delaying and failing IT projects are selected, and the impact of these criteria on eac

    Introducing a New Mathematical Formula for Calculating Customer Perceived Value Using the Taguchi Loss Function and Customer Lifetime Value

    Bakhtiar Ostadi, Ali Abdollahi
    Journal PapersNew Marketing Research Journal , Volume 10 , Issue 3, 2020 November 21, {Pages 105-118 }

    Abstract

    The customers’ perceived value is one of the important and basic parameters in marketing, because, through the value that the customer acquires, the level of customer loyalty and satisfaction of the purchase can be measured. There are several ways to calculate customers’ perceived value. Therefore, in this article, first, the methods of calculating customer value are introduced. Then, the Taguchi loss function is introduced and its usability is mentioned to calculate the customers’ perceived value. Next, by equating the Taguchi loss function in the sales concept, a new formula for calculating the customers’ perceived value and the company’s perceived value is presented. One of the main results of the proposed model is that the pro

    Evaluating the Efficiency of petrochemical companies based on human resource, operations and sales functions using Data Envelopment Analysis (DEA) approach

    B Ostadi, M Zarinkolah
    Journal Papers , , {Pages }

    Abstract

    دروس نیمسال جاری

    • كارشناسي ارشد
      مديريت مالي ( واحد)
      دانشکده مهندسی صنایع و سیستم‌ها، گروه مديريت سيستم و بهره وري
    • كارشناسي ارشد
      شبيه سازي كامپيوتري ، مدل سازي و بهينه سازي ( واحد)
    • كارشناسي ارشد
      مهندسي ايمني و تحليل ريسك ( واحد)

    دروس نیمسال قبل

    • كارشناسي ارشد
      بازار يابي ( واحد)
      دانشکده مهندسی صنایع و سیستم‌ها، گروه مديريت سيستم و بهره وري
    • كارشناسي ارشد
      مهندسي كيفيت ( واحد)
    • كارشناسي ارشد
      نظريه و كاربرد پايايي ( واحد)
    • 1397
      حسين زاده, علي
      مدلسازي تخصيص ريسك مشاركتهاي بخش دولتي و خصوصي مبتني بر مفاهيم مديريت دانش وبا استفاده از روش فازي و تكنيك بهترين بدترين
    • 1397
      نجاريان خوراسگاني, پويه
    • 1398
      قاهري, سيما
    • 1398
      مرادي, روژين
    • 1398
      حدادزاده لنگري, محسن
    • 1398
      مقيسه, فاطمه
    • 1398
      نبي زاده نوده, سيده معصومه
    • 1398
      نجفيان قبادي, زينب
    • 1398
      رحماني منشادي, بهاره
    • عضو حقیقی شورای نظارت دانشکده
    • مدیر گروه مدیریت سیستم و بهره‌وری
    • عضو شورای برنامه ریزی توسعه اقتصادی دانشگاه
    • عضو کمیته بازاریابی پژوهشی و فناوری
    • عضو کمیته ارتقا سطح درآمدزایی، کاهش هزینه و توسعه منابع پایدار معاونت آموزشی
    • مدیر پروژه استقرار سیستم های یکپارچه (ERP) معاونت توسعه منابع و سرمایه انسانی
    • عضو هیئت مدیره انجمن علمی استاندارد ایران
    • عضو هیات موسس انجمن علمی بهره وری ایران
    • عضو کمیته فنی مدیریت کیفیت و تضمین کیفیت (در هر دو سطح ملی / بین المللی) ISIRI/TC 176
    • رئیس کمیسیون تدوین استاندارد سیستم مدیریت آراستگی سازمانی
    • دبیر اجرایی یازدهمین کنفرانس بین المللی مهندس صنایع
      داده ای یافت نشد

    مهم

    جدید

      اطلاعیه ای درج نشده است