Fa
  • Ph.D. (2013)

    mechanical engineering

    Mechanical Engineering, Sharif University of Technology,

  • Ph.D. (2007)

    Mechanical Engineering,Energy Conversion: Internal Combustion Engines

    Mechanical Engineering, Sharif University of Tehnology,

  • Ph.D. (2005)

    Mechanical Engineering, Thermofluids: Internal Combustion Engines

    Mechanical Engineering, Iran University of Science and Technology,

  • Experimental study of domestic and industrial combustion systems and development of advanced flame characterization techniques
  • Design,fabrication, and experimental study of particle-containing systems for thermal and biological applications
  • Advanced Measurement Systems Research Laboratory

    Research field: روش های اندازه گیری

    Expert: Vahid Moshfegh

    Phone: 02182883505

    Address:

My name is Mohammad Zabetian, I was born in city of Natanz in Isfahan province, Iran. Since 2007, I have focused on conducting research projects and enhancing university-industry collaborations. I hope that team work and usage of huge potential of Iran, especially its human resources, result in improvement in scientific and life aspects of humans in Iran and the world.

Contact

Curriculum Vitae (CV)

Thermo-hydraulic performance of wavy microchannel heat sink with oblique grooved finned

Yousef Alihosseini, Mohammad Zabetian, Heyhat Mohammad Mahdi
Journal PaperApplied Thermal Engineering , 2021 February 16, {Pages }

Abstract

One of the crucial phenomena to enhance the heat transfer of microchannel heat sinks is the flow mixing and wall interaction through the secondary flow. In the present study, a combination of the wavy and the oblique grooved microchannel patterns was investigated to improve the performance of the microchannel heat sink. The oblique grooves with a pitch of 375 ?m were combined with the wavy microchannel. The effect of fins with widths of 250 and 125 ?m on thermal performance was investigated (Type-1 and Type-2). The amplitude of 250 ?m and wavelength of 2500 ?m were considered for wavy microchannels. Furthermore, the effect of pitches on the heat transfer was studied; subsequently, pitches of 750 and 1500 ?m were analyzed (Type-3 a

Comparison of laser ignition and spark plug by thermodynamic simulation of multi-zone combustion for lean methane-air mixtures in the internal combustion engine

Sasan Azarmanesh, Mohammad Zabetian
Journal PaperEnergy , Volume 216 , Issue 1, 2021 February 1, {Pages }

Abstract

Numerical and experimental investigation of a flow focusing droplet-based microfluidic device

M Soroor, MZ Targhi, SA Tabatabaei
Journal Paper , , {Pages }

Abstract

Effect of liquid cooling on PCR performance with the parametric study of cross-section shapes of microchannels

Y Alihosseini, MR Azaddel, S Moslemi, M Mohammadi, ...
Journal Paper , , {Pages }

Abstract

Thermal performance investigation of a premixed surface flame burner used in the domestic heating boilers

Z Ahmadi, M Zabetian
Journal Paper , , {Pages }

Abstract

Design and experimental investigation of a novel spiral microfluidic chip to separate wide size range of micro-particles aimed at cell separation

A Tabatabaei, M Zabetian
Journal Paper , , {Pages }

Abstract

Basic concepts of biological microparticles isolation by inertia spiral microchannels in simple terms: a review

A Tabatabaei, J Javaherchian, M Zabetian, Mohammad, Yaghubi
Journal Paper , , {Pages }

Abstract

Investigation of the surface flame burner functional diagram using chemiluminescence and image analysis

Z Ahmadi, M Zabetian
Journal Paper , , {Pages }

Abstract

Blood Particle Separation Using Dielectrophoresis in A Novel Microchannel: A Numerical Study.

O Siani Zahedi, Mahdi Sojoodi, M Targhi Zabetian, MANSOUREH Movahedin
Journal PaperCell journal , Volume 22 , Issue 2, 2020 July , {Pages 218-226 }

Abstract

Objective: We present a four-branch model of the dielectrophoresis (DEP) method that takes into consideration the inherent properties of particles, including size, electrical conductivity, and permittivity coefficient. By using this model, bioparticles can be continuously separated by the application of only a one-stage separation process. Materials and Methods: In this numerical study, we based the separation process on the differences in the particle sizes. We used the various negative DEP forces on the particles caused by the electrodes to separate them with a high efficiency. The particle separator could separate blood cells because of their different sizes. Results: Blood cells greater than 12 μm were guided to a special branch, which

Effect of a micro heat sink geometric design on thermo-hydraulic performance: A Review

Yousef Alihosseini, Mohammad Zabetian Targhi, Mohammad Mahdi Heyhat, Nima Ghorbani
Journal Paper , 2020 January 28, {Pages 114974 }

Abstract

With progress in technology and miniaturization of electronic devices, liquid coolants were used increasingly in personal computers, laptops, servers, and supercomputers. Micro heat sinks are widely used for cooling rate enhancement. Geometrical design plays a crucial role in the thermal performance of microchannel heat sinks. This work reviews the researches concerning micro heat sinks via three aspects: (1) Flow passage patterns, (2) Geometry of cross-sections (3) Inlet and outlet manifolds containing header shapes and the manifold position. Main specifications of each feature were tabulated to make it appropriate for comparisons. The main aims of this study are to cover the research gap in a review of cross-section impact on the thermo-h

Diagnostics of flame instability in a premixed surface flame burner using frequency analysis

Badrkhahan M.H, M Zabetian, M.R Karafi
Journal PaperFuel and Combustion , 2020 January , {Pages }

Abstract

Numerical study on the complete separation of blood cells using the integrated dielectrophoretic-photophoretic method in a new microchannel

Omid Zahedi, Mohammad Zabetian, Mahdi Sojoodi, Manaoureh Movahedin
Journal PaperAmirkabir Mechanical Engineering Journal , 2020 January , {Pages }

Abstract

Experimental investigation of combustion species radiation to evaluate equivalence ratio in a surface flame burner

Hossein Soltanian, Mohammad Zabetian, Hadi Pasdarshahri
Journal PaperAmirkabir Mechanical Engineering Journal , 2020 January , {Pages }

Abstract

Dielectrophoretic separation of monocytes from cancer cells in a microfluidic chip using electrodes pitch optimization

Omid Zahedi, Mohammad Zabetian, Mahdi Sojoodi, Manaoureh Movahedin
Journal PaperBioprocess and Biosystems Engineering , 2020 January , {Pages }

Abstract

This study proposes a microfluidic device capable of separating monocytes from a type of cancer cell that is called T-cell acute lymphoblastic leukemia (RPMI-8402) in a continuous flow using negative and positive dielectrophoretic forces. The use of both the hydrodynamic and dielectrophoretic forces allows the separation of RPMI-8402 from monocytes based on differences in their intrinsic electrical properties and sizes. The specific crossover frequencies of monocytes and RPMI-8402 cells have been obtained experimentally. The optimum ranges of electrode pitch-to-channel height ratio at the cross sections with different electrode widths have been generally calculated by numerical simulations of the gradients of the electric field intensities

Design and Experimental Investigation of a Novel Spiral Microfluidic Chip to Separate Wide Size Range of Micro-Particles

Seyed Ali Tabatabaei, Mohammad Zabetian
Journal Paper , 2020 August 27, {Pages }

Abstract

Isolation of microparticles and biological cells on microfluidic chips has received considerable attention due to their applications in numerous areas such as medical and engineering fields. Microparticles separation are of great importance in bioassays owing to the need for a smaller sample and device size, and lower manufacturing costs. In this study, we first explain the concepts of separation and microfluidic science along with their applications in the medical sciences, and then, a conceptual design of a novel inertial microfluidic system is proposed and analyzed. The PDMS spiral microfluidic device was fabricated, and its effects on the separation of particles with sizes similar to biological particles were experimentally analyzed. Th

Blood Particle Separation Using Dielectrophoresis in A Novel Microchannel: A Numerical Study

OZ Siani, M Sojoodi, MZ Targhi, M Movahedin
Journal Paper , , {Pages }

Abstract

Chemiluminescence usage in finding optimum operating range of multi-hole burners

Hossein Soltanian, Mohammad Zabetian Targhi, Hadi Pasdarshahri
Journal PaperEnergy , Volume 180 , Issue 1, 2019 May 18, {Pages 398-404 }

Abstract

In the present study, chemiluminescence analysis is used to determine the optimum range for equivalence ratio (Φ) in a multi-hole cylindrical burner. The premixed burner which uses natural gas is widely applied in gas condensing boilers and is examined here by Flame Emission Spectroscopy (FES). A spectrometry setup was implemented to capture emission of the burner, in order to detect OH*, CH*, C2*, and CO2* species by their chemiluminescence. The emission of OH* and CO2* was investigated for different equivalence ratios and burner power showing a peak in the lean ranges of Φ?=?0.77–0.85 and 0.78–0.85 respectively, that corresponds to the maximum heat release rate. In addition, the OH*/CH* intensity ratio was investigated for range of

Experimental study on the flame stability and color characterization of cylindrical premixed perforated burner of condensing boiler by image processing method

Mahdi Najarnikoo, Mohammad Zabetian Targhi, Hadi Pasdarshahri
Journal PaperEnergy , Volume 189 , 2019 December 15, {Pages 116130 }

Abstract

In this paper, a cylindrical premixed perforated burner which is mostly used in condensing boilers is investigated by image processing methods. The burner is experimentally analyzed in its operating heating capacities (11.7–17.1 kW) and equivalence ratios (0.4–1.2). Flame properties were studied using digital images by CCD camera and color processing techniques. The method devised a procedure for finding a reliable relation between a digital image color and flame characteristics in the visible wavelength domain. It is observed that by decreasing the equivalence ratio from 1.2 to 0.4, the flame color changed from green with yellow and then blue. Besides, flame lift-off and blow off were also observed. Lower flammability limit is in the

Experimental Study of the Laser Induced Flow and Thermophoresis of Suspending Microparticles

Shahrzad Ebadati, Danial Zarbaf, Mohammad Zabetian, Yaser Oghabneshin
Journal PaperTransp Phenom Nano Micro Scales , Volume 6 , 2018 January 1, {Pages 15-19 }

Abstract

The induced flow effect is the rotary motion generated in the fluid flow due to the temperature gradient. The phenomenon of thermophoresis is the movement of particles from the warmer side of the fluid to the cooler side. Laser is a very suitable device for creating a temperature gradient due to its unique features such as high power density, harmonic waves, single wavelength and very low divergence. Thermophoresis phenomenon and induced flow have many uses in the transfer of particles and in various fields such as medicine and industry. In the present work, the phenomena of laser thermal interactions and flows of microparticles were studied. Thermophoresis phenomenon and induced flow were investigated experimentally using laser. Scale anal

Analytical modeling of a mechanism for micro-particle measurement and separation using thermophoresis and photophoresis

Shahrzad Ebadati, Mohammad Zabetian
Journal PaperModares Mechanical Engineering , Volume 18 , Issue 1, 2018 March , {Pages 94-102 }

Abstract

The two thermal effects, thermophoresis and photophoresis phenomena that cause particle movements due to thermal gradient through the liquid and thermal gradient through the particle, respectively, have been widely studied over the past years because of their wide range of applications. This thermal gradient can be made by laser beam. There are a few studies concerning these two effects, especially photophoresis, in liquid media. In this paper, these two effects and their induced velocity to particles are studied in liquid media. The affecting parameters on these effects are studied and their effect on particles are determined. Effect of laser parameters like laser power and wavelength in the channel are discussed and the maximum velocity a

Current Teaching

  • MS.c.

    Advanced Combustion

Teaching History

  • MS.c.

    Advanced Internal Combustion Engines

  • 2020
    Rouzitalab, Farid
    Simulation and experimental study of Spiral microchannel patterns for cell separation
  • 2021
    Jafari, Reza
  • 2021
    Rokhzad, Yasaman
  • 2021
    Shojaan, Behrooz
  • 2021
    Jafari, Hamed
  • 2021
    KeramatiPour, Mehran
  • 2022
    Azadian Farsani, Reza
  • 2022
    Amin, Saeed
  • 2022
    Razlansary, Mohamad Hossein
  • 2022
    Nourikaram, Saeed
  • 2019
    DASTANIAN, RAUF
    Numerical and Experimental investigation of furnace geometry effects on Gaseous fuel flameless combustion
  • 2019
    Mashhadi kashtiban, Mohsen
  • 2020
    Eskandari, Fateme
  • 2020 Third Rank In National Biotech Competition
  • Year 2004 : Ranked 26th among more than 8,500 participants of national entrance exam for master of science in Mechanical engineering
  • Year 2004 : Ranked 30th among more than 7,000 participants of national entrance exam for master of science in Aerospace engineering
  • Year 2006: First rank in Ph.D entrance exam of Mechanical Engineering, Sharif University of Technology
  • :Year 2000 : Ranked 35th among more than 380,000 participants of national entrance exam of Islamic Azad university
  • • Best PhD thesis of Iran, awarded by Iranian Society of Mechanical Engineers(ISME), 2013
  • • PhD thesis was granted by industrial Development and Renovation organization of Iran (IDRO), 2009-2011
  • • Scholarship from Sharif University of Technology for outstanding achievement in educational record: 2007-2008
  • 2019 ,First and Third Ranks in 4th National Fluid Mechanics Competition, Isfahan University of Technology
  • Distinguished Reviewer of 27th Annual International Conference on Mechanical Engineering (ISME 2019
  • First rank of third innovation and invention festival of Iranian combustion institute (ICI) for plan entitled: Experimental set up of premixed burner
  • Second rank of Bio-idea market at biotechnology conference of Tarbiat Modares university, 2018, Dec, 16.
  • Selected Among 4th-10th out of 437 proposals in Starposal Competition 2021
  • Selected as outstanding educator (first stage) in the mechanical engineering department, 2019
  • Selected as outstanding educator (first stage) in the mechanical engineering department, 2020
  • Selected as outstanding educator (first stage) in the mechanical engineering department, 2021
  • Third Rank in The First Starposal Competition held by Tarbiar Modares University Technology Park, 2019
  • Year 2006: Second rank in Ph.D entrance exam of Mechanical Engineering, Amirkabir University of Technology
  • Member of university campus technical committee
  • Vice president of Academic Affairs at University Campus
  • Deputy of Applied Research and Technology Office at Tarbiat Modares University
  • Manager of Research and Innovation of Research and Technology Deputy at Tarbiat Modares University

Top

New

    no record found