Mechanical Engineering

Graduate Students: Principle Supervisor

Rezai, M.         Additive Manufacturing of Metallic Products in Fused Deposition Modelling Process (3D Printing), (PhD, Started 2017).

Hedayati, K.    Manufacture of Resorbabel Schafold reinforced with Continuous Fibers (PhD, Started 2017).

Ahmadi, S        Additive Manufacturing Assisted Tissue Engineering, (PhD, Started 2017).

Bagheri, A.       Simultaneous Manufacture of Soft and Hard Tissues using Additive manufacturing Process: DLP process,  (PhD, Started 2014).

Nabipour, M.   Additive Manufacture of composite parts in FDM process, (2014-2016).

Akhundi, B.     Additive Manufacturing: 3-D printing of Continuous Fiber Plastic Parts in FDM process, (PhD, Started 2013)

Hamrang, Sh.   Visualization of Gas Assisted Injection Molding of a Multi-cavities Mold, (MSc., 2012-2014)

Asadi, A.         Extrusion of Continuous Natural Fiber Reinforced Wood Plastic Composites, (MSc., 2012-2014)

Taheri, H.:       Design and Manufacture of a Modular Extrusion Die for Production of Continuous Glass Fiber Reinforced Wood Plastic Composites,  (MSc., 2009-2011)

Kargar, M.:      Extrusion Foaming of Continuous Fiber Reinforced Wood Plastic Composites, (MSc., 2009-2011)

Sedghi, V.:       Experimental Study on the effect of Pre-Tension on Mechanical Strength of continuous glass Fiber Reinforced WPC in Injection Molding Process, , (MSc., 2011-2014)

Amiri, M.:        Study of Fracture Behavior in Wood Plastic Composited using CDM, (PhD, Started 2011)

Barmuz, M.:     Manufacture and Characterization of Smart Polymers, (PhD, Started 2012)

Ahmadzai, A., Experimental and Theoretical Study on Expansion Behavior of Injection Foamed Parts, (PhD, 2008-2014)

Shahi, P.:          Effect of Blending on the Production of Polyethylene Foams, (PhD, Started 2010)

Zolfaghari, A.  Experimental and Theoretical Study on production of Hybrid Long Fiber Reinforced WPC in Extrusion Process, (PhD, 2008-2013).

Alavi, F.:          Micromechanical Behavior of Failure in Particle reinforced Plastic Composites, (PhD, 2008-2013)

Ahmadi, M.     Gas Assisted Injection Molding of Wood Plastic Composites, (MSc, 2009-2012)

Adli, A.            Micromechanics Modeling of Yonge’s Modulus and Strength of Wood Plastic Composites, (MSc, 2009-2012)

TabkhPaz, M.   Effect of Melt Flow Index of Polymeric Matrix on the Recycleability of Extruded Wood Plastic Composites, (MSc, 2008-2012)

Abdollahi, A.   Experimental Study of process-ability of the Injection molded Rubber-Reinforced Plastic Composites, (MSc., 2008-2012)

Daryabari, Y.   Injection Foam processing of Wood-Plastic Composites, (MSc., 2008-2012)

Soury, E.;         Experimental and Theoretical Study on Flow instability in Extrusion of WPC products, (PhD, 2007-2012)

Nazari, M.;       Foam Extrusion Coating of Communication Cables, (PhD, 2006-2010)

Shakoori, E.,:   Theoretical Investigation on Die pressure prediction and Effect of Die Pressure on Mechanical Properties of Extruded Wood-Plastic Composites, (MSc., 2007-2009)

Shahi, P.:          Effect of Process Design on Mechanical Properties of Extruded Wood- Plastic Composite Products, (MSc., 2007-2010)

Haghshenas, M., Foam Extrusion of Wood-Plastic Composites to Optimize Weight and Cost, (MSc., 2007-2010)

Mahmoodi, M.;Visualization and Theoretical analysis of Bubble Dynamics in Filling Stage of Injection Foaming Process, (MSc., 2006-2008)

Zolfaghari, A.;Experimental and Theoretical Study on Die Balancing in Extrusion of WPC Profiles (MSc., 2006-2008, Continued to PhD)

Soury, E.;        Design, Optimization and Manufacture of Wood- Plastic Composite Pallets (MSc, 2005-2007), continued to PhD)

Ahmadzai, A.;Study on Effect of Processing Parameters on Shaping of Water Assisted Injection Molded Parts -(MSc, 2005-2007, continued to PhD)

Rezavand, S.A.M.;Experimental Study on Microcellular Foams in Injection Molding Process, (PhD, 2004-2010).

Azdast, T.;        Numerical Simulation of Constraint Shrinkage in Injection Molding Parts, (PhD, 2001-2006).

Jafarian, N.;     Injection molding of fine-wood plastic composites, (MSc., 2004-2006)

Fathi, S.;          Visualization of the Melt Flow in the Plastic Injection Molding Process using Direct Observation Method, (MSc., 2004-2006)

Ravan, A.;        Implementation of a Water Assisted Injection Molding System, (MSc., 2003-2005)

Rajabpoor, M.; Design, Manufacture and Implementation of A Microcellular Foam Injection Molding System,

                        (MSc., 2003-2005).

Safarian, A.;     Experimental Study on Metal Injection Molding Process, (MSc., 2003-2005).

Motabar, H.;     Experimental Study on Shrinkage of Injected Molded Parts, (MSc., 2002-2004)

Khamedi, R.;    Design and Manufacture of Calibration Unit for WPC Profile, (MSc. 2002-2004).

Kazemi, K.;      Mechanical and Microstructural Properties of Microcelluar Foams: ABS and its Composites, (MSc., 2002-2004).

Rezavand, S.A.M.;Investigating Effective Processing Parameters on Dimensional Stability of Injected Wax Patterns of Gas Turbine Blades, (MSc., 2002- 2004, continued to PhD)

Rasoolian, M.,: Optimization of Foam Structure in Injected Molded Bear-Loading Pellets, (MSc., 2001, 2003)

Bahari, B.:        Design and Construction of Twin Extruder for Wood-Fiber/Polypropylene Extruded Sheet, (MSc., 2001-2003).

Farajpour, M.: Design, Manufacture, and Optimization of Extrusion Die with I-Profile, (MSc.., 2000-2002)

Zohdi, A.:        Effective Parameters in Injection Molding of PP/Wood-Fiber Composites, (MSc., 2000-2002)

Moallemi, M.: Warpage Analysis of Injected Molded Parts, (MSc., 2000-2002)

Habibzadeh, N.: Design and Manufacturing of Gas Nozzle in Gas Assisted Injection Moulding Process, (MSc.)

Alaai, F.,          Gas Assisted Injection Molding: design and Process, (MSc., 1999-2001)

Naazeri, H.,      Design of a Software Program for Geometric Tolerance in CAD Systems, (MSc., 1998,2000)

Paakdaamanian, S.: Design and Manufacture of a Semi-Continuous Casting Process for Brass Rod Production, (MSc., 1998-2000)

Akbarian Gilan, A. : Design and Manufacture of an Extrusion System for Soya Oil Extraction, (MSc., 1997,1999)