Year |
Title |
2023 |
An integrated methodology applied for reliability based multi-disciplinary design optimization in EPFE with LOX/kerosene
HR Alimohammadi, H Naseh, F Ommi
Reliability Engineering & System Safety 240, 109570
|
2023 |
Study of the acoustic response of a swirl/bluff-body stabilized natural gas flame: experimental aspects and theoretical rationale
M Behzadi, E Movahednejad, F Ommi
Journal of Thermal Analysis and Calorimetry, 1-14
|
2023 |
Transient and steady-periodic performance analysis of a multi-stage thermoacoustic
pulse tube cryocooler
M Bahrami, F Ommi
Iranian Journal of Mechanical Engineering Transactions of ISME 25 (1),
6-30
|
2023 |
Numerical modeling of magnetic field impact on the thermal behavior of a
microchannel heat sink
B Jalili, A Rezaeian, P Jalili, F Ommi, DD Ganji
Case Studies in Thermal Engineering 45, 102944
|
2022 |
Start-up and damping of a standing wave thermoacoustic engine: model development
and experimental evaluation
A Moradi, M Bahrami, F Ommi, Z Saboohi
Heat and Mass Transfer 58 (12), 2175-2193
|
2022 |
Design and simulation of a hybrid electric vehicle in order to increasing
efficiency and reducing pollution
F Ommi, S Souri, E Rostami
Engine Research 37 (37), 35-48
|
2022 |
Using maximum entropy method for prediction of droplet size and velocity
distribution in spray
E Movahednejad, F Ommi, K Nekoufar
Engine Research 25 (25), 35-44
|
2022 |
Effect of electrode erosion on the required ignition voltage of spark plug
in CNG spark ignition engine
S Javan, SV Hosseini, SS Alaviyoun, F Ommi
Engine Research 26 (26), 31-39
|
2022 |
Modeling of an SI engine performance parameters and emissions using bio-ethanol-gasoline
blends by genetic programming
M Kiani Deh Kiani, B Ghobadian, F Ommi, GH Najafi
Engine Research 27 (27), 47-57
|
2022 |
Investigation of the effect of injection diameter on the characteristics
of the flowfield of transverse injection into supersonic air crossflow
M Zahedzadeh, F Ommi
Aerospace Knowledge and Technology Journal 11 (1), 131-146
|
2022 |
Assessment of optimal reaction progress variable characteristics for partially
premixed flames
F Chitgarha, F Ommi, M Farshchi
Combustion Theory and Modelling 26 (5), 797-830
|
2022 |
model development for Startup and damping of a standing wave thermo-acoustic
engine
A Moradi, M Bahrami, Z Saboohi, F Ommi
Sharif Journal of Mechanical Engineering
|
2022 |
Experimental and numerical study for the effect of aqueous solution on heat
transfer characteristics of two phase close thermosyphon
K Hosseinzadeh, MAE Moghaddam, M Hatami, DD Ganji, F Ommi
International Communications in Heat and Mass Transfer 135, 106129
|
2022 |
Investigating the Effects of Adding Butene, Homopolymer to Gasoline on Engine
Performance Parameters and Pollutant Emissions: Empirical Study and Process
Optimization
S Davari, F Ommi, Z Saboohi
Journal of The Institution of Engineers (India): Series C 103 (3), 421-434
|
2022 |
Progressive Latin Hypercube sampling-based robust design optimisation (PLHS-RDO)
MNP Meibody, H Naseh, F Ommi
Australian Journal of Mechanical Engineering 20 (3), 660-667
|
2022 |
MODEL DEVELOPMENT FOR STARTUP AND DAMPING
OF A STANDING WAVE THERMO-ACOUSTIC ENGINE
AR Moradi, F Ommi, M Bahrami, Z Saboohi
Sharif Journal of Mechanical Engineering 38 (1), 113-125
|
2022 |
Experimental and numerical study of a twin-fluid two-phase internal-mixing
atomizer
A Mohammadi, F Ommi, Z Saboohi
Journal of Thermal Analysis and Calorimetry 147 (5), 3673-3687
|
2022 |
The effect of sinusoidal fins’ amplitude on the thermo-hydraulic performance
of a solar air heater
Z Saboohi, F Ommi, E Rahmani, T Moradi, A Fattahi, M Delpisheh, ...
Chemical Engineering Communications, 1-15
|
2022 |
Performance of a multi-stage thermoacoustically-driven pulse tube cryocooler:
Uncertainty quantification and sensitivity analysis
M Bahrami, F Ommi
Applied Thermal Engineering 200, 117653
|
2022 |
Effect of Ramp Height on Fuel-Air Mixing Characteristics for Dual Transverse
Injection behind the Ramp in Supersonic Air Crossflow
M Zahedzadeh, F OMMI
AEROSPACE MECHANICS JOURNAL 18 (369002027), 27-40
|
2022 |
Traveling-wave thermoacoustic refrigerator with curved and tapered surfaces
to minimize streaming
M Bahrami, F Ommi
Invention Disclosure 2, 100009
|
2022 |
Numerical Study of the Effect of Spray Geometric Parameters on Fuel Flow
and Air Core in Open-end Pressure-swirl Atomizer
M Moradi, AS KARIMIAN, F Ommi, M SARHADDI
AEROSPACE MECHANICS JOURNAL 18 (369002027), 127-140
|
2022 |
Study of the effect of bluff body size on stability limits of a premixed
natural gas swirl burner
M Behzadi, SH Siyadat, F Ommi, Z Saboohi
Journal of Thermal Analysis and Calorimetry, 1-14
|
2021 |
Experimental study of the effects of adding methylated homopolymer to gasoline
on the engine performance and pollutant emissions
S Davari, F Ommi, Z Saboohi
Journal of Solid and Fluid Mechanics 11 (5), 199-210
|
2021 |
Comparison of waste heat recovery from a Proton Exchange Membrane fuel cell
by gas turbine or Organic Rankin Cycle: a display of 3E analysis
V Mohammadzadeh, F Ommi, Z Saboohi, E Gholamian
Iranian Journal of Hydrogen & Fuel Cell 8 (2), 103-112
|
2021 |
Developing an augmented onset model for a thermoacoustically-driven, pulse
tube cryocooler
M Bahrami, F Ommi
Sustainable Energy Technologies and Assessments 47, 101402
|
2021 |
Multi-objective optimization of a lean premixed laboratory combustor through
CFD-CRN approach
H Khodayari, F Ommi, Z Saboohi
Thermal Science and Engineering Progress 25, 101014
|
2021 |
Developing a multi-objective multi-disciplinary robust design optimization
framework
MNP Meibody, H Naseh, F Ommi
Scientia Iranica 28 (4), 2150-2163
|
2021 |
Two-dimensional numerical simulation of pyrolysis and erosion in a solid
rocket motor diverging-converging nozzle
M Razmjooei, M Shahbazi, F Ommi
Journal of Space Science and Technology 14 (2), 1-26
|
2021 |
Numerical simulation of a solar air heater equipped with wavy and raccoon-shaped
fins: The effect of fins’ height
E Rahmani, T Moradi, A Fattahi, M Delpisheh, N Karimi, F Ommi, ...
Sustainable Energy Technologies and Assessments 45, 101227
|
2021 |
Numerical study of different flame regimes in the laminar counterflow spray
M Havasi, F Ommi, F Chitgarha
Fuel and Combustion 14 (1), 29-46
|
2021 |
Experimental study of the effect of a non-oxygenated additive on spark-ignition
engine performance and pollutant emissions
S Davari, F Ommi, Z Saboohi, M Safar
International Journal of Engineering 34 (4), 1035-1045
|
2021 |
A novel framework for liquid propellant engine’s cooling system design by
sensitivity analysis based on RSM and multi-objective optimization using
PSO
HR Alimohammadi, H Naseh, F Ommi
Advances in Space Research 67 (5), 1682-1700
|
2021 |
Hot-film/hot-wire anemometer calibration for low velocities using image
processing
M Behzadi, MH Ahmadi, F Ommi
Scientia Iranica 28 (1), 265-272
|
2021 |
Experimental study of the effects of multi-electrode spark plugs to improve
engine performance and reduce pollutants of the XU7JP/L3 engine
M Safar, F Ommi, Z Saboohi
Journal of Mechanical Engineering 50 (4), 105-113
|
2021 |
Adaptive surrogate modelling algorithm for meta-model-based design optimisation
MNP Meibody, H Naseh, F Ommi
International Journal of Industrial and Systems Engineering 39 (3),
394-410
|
2021 |
A new synthetic metamodel methodology for liquid‐propellant engines cooling
system optimization
HR Alimohammadi, H Naseh, F Ommi
Heat Transfer 50 (1), 907-941
|
2021 |
Effects of steam addition and/or injection on the combustion characteristics:
A review
A Sehat, F Ommi, Z Saboohi
Thermal Science 25 (3 Part A), 1625-1652
|
2020 |
Numerical study of flow characteristics in a single-element Lean Direct
Injection (LDI) combustion chamber
SH Abbasi, F Ommi, Z Saboohi
Journal of Solid and Fluid Mechanics 10 (4), 287-302
|
2020 |
Numerical study on spray characteristic of double phases internal mix atomizer
with Lagrangian approach
A Mohammadi, F Ommi
Journal of Space Science and Technology 13 (4), 15-24
|
2020 |
The Strategy of using porous material in liquid fuel space propulsion injectors
A Moradi, F Ommi, Z Saboohi
علوم و مهندسی هوافضا 13 (2), 73-84
|
2020 |
Effect of SiO2 super-hydrophobic coating and self-rewetting fluid on two
phase closed thermosyphon heat transfer characteristics: an experimental
and numerical study
K Hosseinzadeh, DD Ganji, F Ommi
Journal of Molecular Liquids 315, 113748
|
2020 |
Large eddy simulation of the destruction of convecting hot fluid pockets
through a cold channel flow
Z Saboohi, F Ommi, A Fattahi, N Karimi
International Journal of Thermal Sciences 156, 106475
|
2020 |
Uncertainty Analysis of Spray Injection Process in a Model Scale Liquid
Fuel Micro-Motor
M Nadjafi, MA Farsi, F Ommi
Iranian Journal of Mechanical Engineering Transactions of the ISME 21
(2)
|
2020 |
Numerical and experimental study of twin-fluid two-phase internal-mixing
atomizer to develop maximum entropy method
A Mohammadi, O Fathollah
Chinese Journal of Aeronautics 33 (9), 2281-2294
|
2020 |
Uncertainty Analysis of the Chemical Reactor Network Approach for Predicting
the Pollutant Emissions in a Double-Swirl Combustor
H Khodayari, F Ommi, Z Saboohi
Journal of Energy Resources Technology 142 (9), 092302
|
2020 |
Comparison of gas turbine inlet air cooling systems for several climates
in Iran using energy, exergy, economic, and environmental (4E) analyses
MRM Yazdi, F Ommi, MA Ehyaei, MA Rosen
Energy Conversion and Management 216, 112944
|
2020 |
Synergy between Noise Reduction Techniques Applied in Different Industries:
A Review
M Yadegari, F Ommi, Z Saboohi
The International Journal of Multiphysics 14 (2), 161-192
|
2020 |
Two-dimensional numerical simulation of ablative thermal insulators in solid
rocket motor combustion chamber
M Razmjooei, M Shahbazi, F Ommi
Journal of Space Science and Technology 13 (2), 13-34
|
2020 |
Simulation and Examination of Flow Characteristics of the Butterfly Valve
F Ommi, H Khodayari, Z Saboohi
Journal of Aerospace Science and Technology 13 (1), 47-56
|
2020 |
Numerical study of the effect of air injection before fuel injection in
supersonic air crossflow
M Zahedzadeh, F Ommi
Aerospace Knowledge and Technology Journal 9 (1), 185-196
|
2020 |
Prediction of droplet size and velocity distribution based on maximum entropy
formulation by nonlinear instability analysis of liquid sheet spray and
turbulent of nozzle flow
F Ommi, D Poorrajab Sufinai, D Doomiri Ganji, SH Moosavi
Journal of Space Science and Technology 13 (1), 1-11
|
2020 |
A review on the applications of the chemical reactor network approach on
the prediction of pollutant emissions
H Khodayari, F Ommi, Z Saboohi
Aircraft Engineering and Aerospace Technology
|
2020 |
Investigation of Magnetohydrodynamics Technology and Its Application in
Tension Drain
F Ommi, K Nekoufar
Journal of Technology in Aerospace Engineering 3 (4), 1-10
|
2020 |
Assessment of converting approach to efficient design of micro-turboprop
engines
H Golchin, O Fathollah, Z Saboohi
Chinese Journal of Aeronautics 33 (2), 572-588
|
2020 |
Numerical Investigation of Pore-Structure in Design of Catalytic Beds for
Mono-Propellant Thrusters
D Zhaleh, F Ommi, Z Saboohi
Modares Mechanical Engineering 20 (1), 193-202
|
2020 |
Parametric Study on the Performance of a Gasoline Turbocharged Aircraft
Engine at High Altitudes using a One-Dimensional Model
H Mansouri, F OMMI, SA Sharifi
AEROSPACE MECHANICS JOURNAL 16 (159), 67-82
|
2019 |
Sensitivity analysis based on Progressive LHS Applied to Hydrazine Catalyst
Bed Design
M Naddafi Pour Meibody, H Naseh, F Ommi
Journal of Space Science and Technology 12 (4), 35-46
|
2019 |
Simulation of a partially premixed laminar counterflow Flame Using 2D flamelet
generated manifold
F Chitgarha, F Ommi
Fuel and Combustion 12 (4), 51-63
|
2019 |
Sensitivity analysis and optimization of delta wing design parameters using
CFD-based response surface method
M Aelaei, S Karimian, F Ommi
Journal of applied fluid mechanics 12 (6), 1885-1903
|
2019 |
Investigating the effect of Fe2O3 and TiO2 nanoparticle and engine variables
on the gasoline engine performance through statistical analysis
M Valihesari, V Pirouzfar, F Ommi, F Zamankhan
Fuel 254, 115618
|
2019 |
On the response of a lean-premixed hydrogen combustor to acoustic and dissipative-dispersive
entropy waves
A Fattahi, SM Hosseinalipour, N Karimi, Z Saboohi, F Ommi
Energy 180, 272-291
|
2019 |
Numerical simulation of complicated grains with 3D burnback and Quasi-One-Dimensional
flow field of solid rocket motors
M Shahbazi, M Razmjooei, F Ommi
Journal of Space Science and Technology 12 (2), 23-41
|
2019 |
Experimental Study of the Effect of Probe Calibration on the Mass Flow and
Velocity Measurement of Hot Air at High-Subsonic Mach Numbers
F Ommi, H Golchin
Modares Mechanical Engineering 19 (7), 1805-1817
|
2019 |
Performance prediction of aircraft gasoline turbocharged engine at high-altitudes
H Mansouri, F Ommi
Applied Thermal Engineering 156, 587-596
|
2019 |
Numerical study of effect of inlet flow turbulent on trajectory and breakup
of liquid jet in crossflow
B Jalili, F Ommi, S Nourazar, D Domiri Ganji
Journal of Solid and Fluid Mechanics 9 (2), 167-179
|
2019 |
Numerical Study of Step Geometry Effects on Gaseous Sonic Transverse Injection
in Supersonic Crossflow
M Zahedzadeh, F Ommi
Modares Mechanical Engineering 19 (5), 1075-1084
|
2019 |
Numerical Study of Staged Transverse Injection of Sonic Jets into Supersonic
Crossflows behind a Step
M Zahedzadeh, F Ommi
Journal of Modeling in Engineering 17 (56), 281-291
|
2019 |
Modeling and Performance Evaluation of standalone Solid Oxide Fuel Cell
for Aircraft APUII: Dynamic Performance
G Pourabedin, F Ommi
International Journal of Smart Grid 3 (1)
|
2019 |
Performance Analysis of Liquid Propellant Micro-propulsion with Liquid Oxygen
as Cryogenic Oxidizer
A Edalatpour, F Ommi, Z Saboohi
Journal of Space Science and Technology 12 (1), 23-40
|
2019 |
Numerical study of supersonic gas flow in single expansion ramp nozzle
M Zahedzadeh, F Ommi
Journal of Mechanical Engineering 49 (1), 137-145
|
2019 |
Multi-objective optimization approach toward conceptual design of gas turbine
combustor
Z Saboohi, F Ommi, MJ Akbari
Applied Thermal Engineering 148, 1210-1223
|
2019 |
A kriging based multi objective gray wolf optimization for hydrazine catalyst
bed
M Meibody, H Naseh, F Ommi
Engineering Solid Mechanics 7 (3), 179-192
|
2018 |
Investigation of the primary breakup length and instability of non-Newtonian
viscoelastic liquid jets
H Khodayari, F Ommi, Z Saboohi
The International Journal of Multiphysics 12 (4), 327-348
|
2018 |
An Investigation of Vertical Take-off and Landing Air Taxis with Electric
and Hybrid Propulsion Systems
A Edalatpour, Z Saboohi, F Ommi
Journal of Technology in Aerospace Engineering 2 (3), 31-42
|
2018 |
Investigation of the effects of steam addition on the conceptual design
and pollutants emission of the gas turbine combustor
F Ommi
Modares Mechanical Engineering 18 (6), 85-96
|
2018 |
A Review on the Applications of Chemical Reactor Network via Computational
Fluid Dynamics Hybrid Method in Order to Predict the Pollutant Emissions
F Ommi, Z Saboohi, H Khodayari
Journal of Technology in Aerospace Engineering 2 (2), 11-23
|
2018 |
Investigating the effect of MgO and CeO2 metal nanoparticle on
the gasoline fuel properties: empirical modeling and process optimization
by surface methodology
F Zamankhan, V Pirouzfar, F Ommi, M Valihesari
Environmental Science and Pollution Research 25, 22889-22902
|
2018 |
Numerical Study of Transverse Injection into Supersonic flow of the Scramjet
Combustor
M Zahedzadeh, F Ommi
Journal of Technology in Aerospace Engineering 2 (1), 1-8
|
2018 |
Numerical-parametrical analysis on the hydrogen peroxide catalyst bed for
space monopropellant thruster applications
H Naseh, MNP Meibody, H Hosseini Anari, F Ommi
Journal of Applied Research of Chemical-Polymer Engineering 1 (2), 15-24
|
2018 |
Experimental study of effective factors on liquid jet trajectory and breakup
in gaseous crossflow
F Ommi, S Nourazar
Modares Mechanical Engineering 17 (12), 354-360
|
2018 |
Quasi-One-Dimensional Modeling of Internal Ballistic in Solid Propellant
Rocket Considering Saderholm Erosive Burning Model
M Razmjooei, M Shahbazi, F Ommi
JOURNAL OF ENERGETIC MATERIALS 13 (339), 197-208
|
2017 |
Accuracy Evaluation of Semi-empirical and Numerical Methods in Estimation
of Aerodynamic Coefficients for air-launch-to-orbit delta wing
F Ommi
Modares Mechanical Engineering 17 (9), 237-244
|
2017 |
Emission prediction in conceptual design of the aircraft engines using augmented
CRN
Z Saboohi, F Ommi
The Aeronautical Journal 121 (1241), 1005-1028
|
2017 |
Low-frequency interior noise in prop-driven aircrafts: Sources and control
methodologies
F Ommi, M Azimi
Noise & Vibration Worldwide 48 (7-8), 94-98
|
2017 |
Effective Parameters of the Aluminum Particles Cyclone Separator in the
Effervescent Fuel
J Vaziri Naein Nejad, F Ommi, SH Moosavi
Journal of Space Science and Technology 10 (1), 35-45
|
2017 |
Investigation of optimized body tilt angle and acoustic excitation affecting
performance of hydro cyclone particles separator based on genetic algorithm
F Ommi, J Vaziri Naeen Nejad, SH Moosavy
Modares Mechanical Engineering 17 (3), 37-46
|
2017 |
Effect of gas-to-liquid density ratios at different liquid viscosity on
the atomization of the air-blast atomizer
E Rostami, F Ommi, A Mirmohammadi, H Khodayari
Australian Journal of Mechanical Engineering 15 (2), 125-136
|
2017 |
The effect of an acoustic source on performance of the cyclone separator
system for water purification
J Vaziri Naeen Nejad, F Ommi, SH Moosavy
Modares Mechanical Engineering 16 (13), 166-170
|
2017 |
Conceptual Design of Conventional Gas Turbine Combustors Aiming at Pollutants
Emission Prediction
F Ommi, Z Saboohi
Modares Mechanical Engineering 16 (10), 429-440
|
2017 |
AN EXPERIMENTAL STUDY OF LIQUID JET INTO A CROSS FLOW, BASED ON SCHLIEREN
TECHNIQUE
AR AKHAVEIN, F Ommi, E Movahednejad
FLUID MECHANICS AND AERODYNAMICS JOURNAL 5 (1), 17-27
|
2016 |
Application of maximum entropy principle for estimation of droplet-size
distribution using internal flow analysis of a swirl injector
SM Hosseinalipour, H Karimaei, E Movahednejad, F Ommi
International Journal of Spray and Combustion Dynamics 8 (3), 205-216
|
2016 |
One-dimensional electrolyzer modeling and system sizing for solar hydrogen
production: an economic approach
M Jamali Ghahderijani, F Ommi
Journal of renewable energy and environment 3 (3), 31-43
|
2016 |
Satellite Adaptive Attitude Control Based on Decentralized Minimal Control
in the Presence of Reaction wheel Accurate Model
A Mehrabi, F Ommi
Journal of Space Science and Technology 9 (1), 59-72
|
2016 |
Development of an augmented conceptual design tool for aircraft gas turbine
combustors
Z Saboohi, F Ommi, A Fakhrtabatabaei
The International Journal of Multiphysics 10 (1), 53-74
|
2016 |
Simulation and investigation of the turbine blade cooling film heat transfer
effects
H Khodayari, F Ommi, E Rostami
Journal of Mechanical Engineering of Tabriz University 46, 99-107
|
2016 |
Design, manufacturing, cold and hot-fire test of a liquid subscale engine
with single swirl double base injector
A Mehrabi, F Ommi, S Valizadeh, E Movahednejad
JOURNAL OF MECHANICAL ENGINEERING AMIRKABIR (AMIRKABIR) 48 (1), 25-28
|
2015 |
Investigation of vessels pressure effect on PEM electrolyzer performance
by using a new OneDimensional Dynamic Model
M Jamali Ghahderijani, F Ommi
Iranian Journal of Hydrogen & Fuel Cell 2 (4), 271-281
|
2015 |
Internal combustion engines in cylinder flow simulation improvement using
nonlinear k-ε turbulence models
A A Mirmohammadi, F Ommi
Journal of Computational & Applied Research in Mechanical Engineering
…
|
2015 |
A Practical Scenario for Cold and Hot-Fire Test of a Liquid Subscale Engine
with Single Swirl Double Base Injector
F Ommia, A Mehrabib, K Nekoufarc
Technology 3 (02), 84-100
|
2015 |
Investigation of the Effect of Liquid and air swirl velocity and liquid
viscosity on the hollow cone spray atomization
B Jalili, F Ommi, E Rostami
International Journal of Material Science Innovations 3 (3), 97-113
|
2015 |
Modeling and Performance Evaluation of Standalone Solid Oxide Fuel Cell
for aircraft APU-I: model-based steady-state performance (Reforming efficacy)
G Pourabedin, F Ommi, P Kazempour
International Journal of Engineering & Technology Sciences 3 (06), 393-407
|
2015 |
Experimental characterization of a swirl injector with tangential inlets.
S Mostafa Hosseinalipour, H Karimaei, F Ommi
Modares Mechanical Engineering 14 (10)
|
2014 |
Experimental investigation of swirl atomizer spray defections
MH Ziraksaz, F Ommi, DD Gandji, M Ashjaee
Meccanica 49, 2747-2755
|
2014 |
Main fan noise mitigation technologies in turbofan engines
F Ommi, M Azimi
Aviation 18 (3), 141-146
|
2014 |
Investigation of the effect of liquid viscosity on the primary break up
lengths and droplet diameter and ligament diameter and instability of a
swirling annular liquid sheet
E Rostami, F Ommi, A Mirmohammadi, H Khodayari
Journal of Advanced Physics 3 (2), 171-178
|
2014 |
Numerical study the effect of mass flow rate on liquid sheet properties
resulting from a swirl injector
SM Hosseinalipour, H Karimaei, F Ommi
3nd Proceding of Gas Turbine
|
2014 |
Fan noise sources and passive reduction methodologies in high bypass turbofan
engines
M Azimi, F Ommi
Noise & Vibration Worldwide 45 (5), 18-22
|
2014 |
Using acoustic liner for fan noise reduction in modern turbofan engines
M Azimi, F Ommi, NJ Alashti
International Journal of Aeronautical and Space Sciences 15 (1), 97-101
|
2014 |
Experimental study of fine center electrode spark plug in Bi-fuel engines
S Javan, SS Alaviyoun, SV Hosseini, F Ommi
Journal of Mechanical Science and Technology 28, 1089-1097
|
2014 |
Application of galerkin optimal homotopy asymptotic method to shock wave
equation
M Azimi, A Mozaffari, F Ommi
Journal of Advanced Physics 3 (1), 35-38
|
2014 |
Supersonic Jet Noise: Main Sources and Reduction Methodologies.
M Azimi, F Ommi
Journal of Engineering Science & Technology Review 7 (2)
|
2014 |
Numerical analysis of droplet impact onto liquid film
H Shetabivash, F Ommi, G Heidarinejad
Physics of Fluids 26 (1), 012102
|
2014 |
Investigation of the Effect of Liquid and Air Swirl Velocity and Liquid
Viscosity on the Hollow Cone Spray Atomization
E Rostami, F Ommi, A Mirmohmmadi, H Khodayari
Annals of the University of Petrosani 16, 75-90
|
2014 |
ANALYSIS STUDY OF SWIRLING AIR STREAM EFFECTS ON SPRAY ATOMIZATION
MS ASKARI, F OMMI, E MOVAHEDNEJAD
AEROSPACE MECHANICS JOURNAL 10 (236), 23-30
|
2014 |
EFFECT OF FUEL ADDITIVES ON GASOLINE VOLATILITY
SS BABAZADEH, SM SEYEDPOUR, F OMMI
JOURNAL OF MECHANICAL ENGINEERING AMIRKABIR (AMIRKABIR) 46 (1), 21-23
|
2013 |
Using nanofluid for heat transfer enhancement in engine cooling process
M Azimi, F Ommi
Journal of Nano Energy and Power Research 2 (2), 132-134
|
2013 |
Using Microjets as an Efficient Technique for Jet Noise Reduction in High
Bypass Turbofan Engines
M Azimi, F Ommi
Journal of Mechanical Engineering 1 (2), 46-50
|
2013 |
EXPERIMENTAL INVESTIGATION OF FUEL INJECTION AND FUEL TRANSPORT INTO THE
CYLINDER IN A PORT-INJECTED SI ENGINE (XU7JP-L3)
F Ommi, E Movahednejad, K Nekofar
Acta Technica Corviniensis-Bulletin of Engineering 6 (3), 49
|
2013 |
COMPARING PERFORMANCE CHARACTERISTICS OF A GASOLINE AND CNG ENGINES AND
INCREASING VOLUME EFFICIENCY AND POWER USING DESIGNED TURBOCHARGER
F Ommi, E Movahednejad, K Nekofar
Acta Technica Corviniensis-Bulletin of Engineering 6 (2), 101
|
2013 |
Application of Genetic programming to predict an SI engine brake power and
torque using ethanol-gasoline fuel blends
MKDEH KIANI, B GHOBADIAN, O Fathollah, G NAJAFI
International Journal of Engineering, Technology and Natural Sciences,
7-15
|
2013 |
Performance and exhaust emissions of a spark ignition engine using GSeries
and E20 fuels
P Nematizade, B Ghobadian, O Fathollah, G Najafi
International Journal of Automotive Engineering and Technologies 2 (2),
55-63
|
2013 |
ESTIMATION OF THE BREAKUP LENGTH FOR THE ANNULAR AND THE ROUND LIQUID JET
USING LINEAR INSTABILITY ANALYSIS (RESEARCH NOTE)
SA Mahdavi, E Movahednejad, F Ommi, SM Hosseinalipour
IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY TRANSACTION B-ENGINEERING
37 (2 …
|
2013 |
Experimental Study of Injection Characteristics of a Multi-hole port injector
on various Fuel Injection pressures and Temperatures
E Movahednejad, F Ommi, K Nekofar
EPJ Web of Conferences 45, 01116
|
2013 |
Investigation some of the properties of fossil fuels and liquid biofuels
blends for utilize at SI engines/Fosil ve Sıvı Biyoyakıtların SI Motorlarında
Yararlı Hale Getirmek …
P Nematizade, B Ghobadian, G NAJAFİ, O Fathollah, A Abbaszadeh
International Journal of Automotive Engineering and Technologies 2 (4),
92-103
|
2013 |
Simulation a natural gas direct injection stratified charge with spark ignition
engine
A Mirmohammadi, F Ommi
AUTOMOTIVE SCIENCE AND ENGINEERING (INTERNATIONAL JOURNAL OF AUTOMOTIVE
…
|
2012 |
Most effective combustion technologies for reducing Nox emissions in aero
gas turbines
F Ommi, M Azimi
The International Journal of Multiphysics 6 (4), 417-424
|
2012 |
Effect of oxygenates blending with gasoline to improve fuel properties
S Babazadeh Shayan, SM Seyedpour, F Ommi
Chinese journal of mechanical engineering 25, 792-797
|
2012 |
MANUFACTURING AND TESTING OF DOUBLE-BASE SWIRL INJECTOR IN ORDER TO IMPROVE
SPRAY CHARACTERISTICS
F Ommi, E Movahednejad, K Nekofar
Acta Technica Corviniensis-Bulletin of Engineering 5 (2), 119
|
2012 |
Modeling and Experimental Investigation of Injection Process in Micro motor
Combustion Chamber of Liquid Fuel Missile
M Najafi, B Elhami, F Ommi, VF Pour
European Journal of Experimental Biology 2 (5), 1807-1819
|
2012 |
Experimental Evaluation of a Reverse Engineering Swirl Atomizer
MH Zirakssaz, F Ommi, D Ganji, M Ashjaee
48th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit, 3747
|
2012 |
Numerical Investigation of Formation and Development of In-cylinder Rotational
Flow in a Spark Ignition Engine
M Yousefi, F Ommi, M Farajpour
Applied Mechanics and Materials 110, 4330-4336
|
2012 |
An Insight into Combustion Process in a Spark Ignition Engine using Three
Dimensional Modeling
M Yousefi, F Ommi, M Farajpour
Applied Mechanics and Materials 110, 3016-3024
|
2012 |
An investigation on effect of high pressure post injection on soot and NO
emissions in a DI diesel engine
K Poorghasemi, F Ommi, H Yaghmaei, A Namaki
Journal of mechanical science and technology 26, 269-281
|
2012 |
Artificial neural networks approach for the prediction of thermal balance
of SI engine using ethanol-gasoline blends
M Kiani Deh Kiani, B Ghobadian, F Ommi, G Najafi, T Yusaf
Multidisciplinary Research and Practice for Information Systems: IFIP
WG 8.4 …
|
2011 |
Application of maximum entropy method for droplet size distribution prediction
using instability analysis of liquid sheet
E Movahednejad, F Ommi, SM Hosseinalipour, CP Chen, SA Mahdavi
Heat and mass transfer 47, 1591-1600
|
2011 |
Development of maximum entropy method for prediction of droplet-size distribution
in primary breakup region of spray
E Movahednejad, F Ommi
International Journal of Chemical and Molecular Engineering 5 (11),
1026-1032
|
2011 |
Response of a planar solid oxide fuel cell to step load and inlet flow temperature
changes
P Kazempoor, F Ommi, V Dorer
Journal of Power Sources 196 (21), 8948-8954
|
2011 |
Performance Evaluation of a Samand Vehicle with Internal Combustion Engine
System and Hybrid Electric-Fuel Cell System
AM Yeganeh Moghadam, F Ommi, P Kazempoor, MR Malekbala, S Javan
The Journal of Engine Research 24 (24), 51-64
|
2011 |
Investigation on Effect of Multiple Injection on Performance and Emission
Reduction in a DI Diesel Engine
F Ommi, K Pourghasemi, V Esfahaniyan, ŮŽA Mirmohammadi
Amirkabir Journal of Mechanical Engineering 43 (1), 1-10
|
2011 |
Study of fuel injection in a port injection engine with indirect injection
with a special look at the impact on the performance of fuel injection timing
and amount of pollutants
F Ommi, E Movahednejad, K Nekoufar
The Journal of Engine Research 23 (23), 11-21
|
2011 |
Prediction of Droplet Size and Velocity Distribution in Spray Using Maximum
Entropy Method
F Ommi, K Nekofar, E Movahednejad
Acta Technica Corviniensis-Bulletin of Engineering 4 (3), 85
|
2011 |
Impact of methanol–gasoline fuel blends on the performance and exhaust emissions
of a SI engine
SB Shayan, SM Seyedpour, F Ommi, SH Moosavy, M Alizadeh
International Journal of Automotive Engineering 1 (3), 219-227
|
2011 |
Investigation of Effects of Spark Plug’s Electrodes Erosion on the Required
Ignition Voltage and Performance of Natural Gas Engine
S Javan, F Ommi, SV Hosseini, SS Alaviyoun
The Journal of Engine Research 21 (21), 21-34
|
2011 |
ATOMYZASION MODELING THE ROTATING SPRAY SLIME
F OMMI, MS ASKARI, ASM HOSEIN, NE MOVAHED
JOURNAL OF SPACE SCIENCE AND TECHNOLOGY (JSST) 4 (12), 39-48
|
2010 |
Modelling and Performance Evaluation of Solid Oxide Fuel Cell for Building
Integrated Co‐and Polygeneration
P Kazempoor, V Dorer, F Ommi
Fuel Cells 10 (6), 1074-1094
|
2010 |
Prediction of droplet size and velocity distribution in droplet formation
region of liquid spray
E Movahednejad, F Ommi, SM Hosseinalipour
Entropy 12 (6), 1484-1498
|
2010 |
Effect of High Pressure Post Injection on Soot and NO Trade-Off in a DI
Diesel Engine
K Poorghasemi, F Ommi, V Esfahanian
ASME International Mechanical Engineering Congress and Exposition 44489,
533-546
|
2010 |
A new approach for supersonic diffuser design
F Ommi, V Farajpour Khanaposhtani, M Agha Seyed Mirzabozorg, ...
Journal of Applied Sciences Research 6 (5), 401-414
|
2010 |
Experimental investigation of characteristics of a double-base swirl injector
in a liquid rocket propellant engine
F Ommi, K Nekofar, A Kargar, E Movahed
Thermal Science 14 (2), 479-491
|
2009 |
Numerical and analytic investigation of the work process in the combustor
of low-thrust liquid-propellant engine
F Ommi, K Nekofar
Thermophysics and Aeromechanics 16 (4), 621-626
|
2009 |
Experimental Investigation of the Combustion of a Spark Ignition Engine,
With Gasoline-Ethanol-MTBE Blends as Fuel, to Reduce Fuel Consumption and
pollutants
F Ommi, K Farhang, A Shafiei Sabet
The Journal of Engine Research 16 (16), 22-28
|
2009 |
Evaluation of hydrogen and methane-fuelled solid oxide fuel cell systems
for residential applications: System design alternative and parameter study
P Kazempoor, V Dorer, F Ommi
International Journal of Hydrogen Energy 34 (20), 8630-8644
|
2009 |
ANALYTICAL STUDY OF LINEAR INSTABILITY OF AN ANNULAR LIQUID SHEET EXPOSED
TO GAS FLOW
F Ommi, K Nekofar, E Movahednejad
Trakia Journal of Sciences 7 (3), 91-94
|
2009 |
Experimental Study on the Effect of Hydrogen Addition to Compressed Natural
Gas (CNG) on Engine Operation and Emission Reduction
F Ommi, A Moshiri, A Shafiei Sabet
The Journal of Engine Research 15 (15), 29-35
|
2009 |
Evaluation of Model and Performance of Fuel Cell Hybrid Electric Vehicle
in Different Drive Cycles
F Ommi, G Pourabedin, K Nekofa
International Journal of Engineering and Applied Sciences 5 (4), 246-252
|
2009 |
Combustion development of a bi-fuel engine
OS Abianeh, M Mirsalim, F Ommi
International journal of automotive technology 10, 17-25
|
2009 |
Modeling of the ranque effect on the basis of the expanded version of thermodynamics
K Nekofar, F Ommi
Journal of Basic and Applied Sciences 5 (1), 27-31
|
2009 |
Dual Base Swirl Injector Design for Increasing Specific Impluse in a Liquid-Fuel
Rocket Engine
E Ommi, AK Movahednejad
JOURNAL OF SPACE SCIENCE AND TECHNOLOGY (JSST) 2 (3), 51-57
|
2009 |
Linear Instability Analysis of an Annular Liquid Sheet With Inner and Outer
Gas Flow
F Ommi, SA Mahdavi, SM Hosseinalipour, E Movahednejad
Fluids Engineering Division Summer Meeting 43727, 1017-1023
|
2009 |
Theoretical and experimental study of multi-phase flow in the intake port
of a port fuel injection engine
F Ommi, E Movahednejad, K Nekofar
Leonardo J. Sci. 8, 31-49
|
2009 |
Prediction of Droplet Size and Velocity Distribution in Spray Using Maximum
Entropy Method
F Ommi, E Movahednejad, SM Hosseinalipour, CP Chen
Fluids Engineering Division Summer Meeting 43727, 1009-1015
|
2009 |
Numerical Study of Injection Time and Injection Angle Effects on Rate of
Fuel Evaporation and Emission of a Multi-point Injection Gasoline Engine
F Ommi, M Farajpour, A Mirmohammadi
AEROSPACE MECHANICS JOURNAL 5 (115), 51-62
|
2009 |
Designing and experimental investigation of characteristics of a double-base
swirl injector in a liquid rocket propellant engine
F Ommi, K Nekofar, E Movahednejad
Journal of Applied Sciences Research 5 (8), 955-968
|
2009 |
Emission and properties characteristics using additive-ethanol-diesel fuel
blends on a diesel engine
F Ommi, K Nekofar, V Pirozfar
Annals of the Faculty of Engineering Hunedora–Journal of Engineering
7, 35-42
|
2008 |
New Approaches to Equilibrium Thermodynamics
F Ommi, K Nekofar
International Journal of Pure and Applied Physics 4 (1), 53-63
|
2008 |
Investigation of oxygenate and nitrate component additive on Physico-chemical
properties and exhaust emission of diesel fuel
V Pirozfar, AZ Moghadam, F Ommi, MR Omidkhah
J Fuel Combust 1 (2)
|
2008 |
Study of injection parameters on performance and fuel consumption in a port-injected
gasoline engine with experimental and theoretical methods
F Ommi, E Movahednejad, K Nekofar
Annals of The Faculty of Engineering Hunedoara–Journal of Engineering
6
|
2006 |
Experimental and Theoretical Study of Injection Timing on Performance and
Exhaust Emissions in a Port-Injected Gasoline Engine
E Movahednejad, F Ommi, M Hosseinalipour, O Samimi
Internal Combustion Engine Division Spring Technical Conference 42061,
137-145
|
2005 |
Experimental and Theoretical Study of injection parameters on performance
and Fuel Consumption in a Port-Injected Gasoline Engine
E Movahednejad, F Ommi, M Hossinalipour, M Karbasforoushha
SAE technical papers, 3805
|
2005 |
Design of DB Injectors for Increasing Propulsive Force in Jets
F Ommi, M Hossinalipour, E Movahednejad
SAE Technical Paper
|
|
Reducing the Aerodynamic Noise of the Axial Flow Fan with Perforated Surface
M YADEGARI, F Ommi, S Karimian Aliabadi, Z Saboohi
Available at SSRN 4372650
|
|
XU7JP/L3
M Safar, F Ommi, Z Saboohi
|
|
Experimental Study of Nozzle Shape Effect on Liquid Jet Characteristics
in Gaseous Crossflow
B Jalili, P Jalili, F Ommi, D Domiri Ganji
Available at SSRN 4161616
|
|
Effect of Oxygenates Blending with Gasoline to Improve Fuel Properties
BSSSS Morteza, O Fathollah
Chinese Journal of Mechanical Engineering 25 (4), 1
|
|
Analysis Study of Swirling Air Stream Effects on Spray Atomization
E Movahednejad, F Ommi, S Askari-Mahdavi
|
|
Dynamic Modeling of Planar Solid Oxide Fuel Cell System for Regional Jet
Aircraft Application (Simple System)
G Pourabedin, F Ommi
|
|
Experimental and Theoretical Study of injection Timing on performance and
Exhaust Emission in a Port-Injected Gasoline Engine
F Ommi, E Movahednejad, M Hossinalipour
|
|
One-Dimensional Dynamic Modeling of PEM Electrolysis for Solar Hydrogen
Production
M JamaliGhahderijani, F Ommi, P Ahmadi, HB Aval
|
|
EVALUATION OF MODEL AND PERFORMANCE OF FUEL CELL HYBRID ELECTRIC VEHICLE
IN DIFFERENT DRIVE CYCLES
K NEKOFAR, F OMMI, G POURABEDIN
|
|
The Journal of Engine Research
S Javan, SV Hosseini, SS Alaviyoun, F Ommi
|
|
KIVA-3V code development for simulation turbulence flows using nonlinear
k-ε model
F Ommi, A Mirmohammadi, SM Mirsalim, K Porghasemi
|
|
INVESTIGATION OF THE SOOT AND NO EMISSION REDUCTION MECHANISM IN DI DIESEL
ENGINES BY MEANS OF SPLIT INJECTION STRATEGY
K POORGHASEMI, F OMMI, V ESFAHANIAN, H TANABI
FUEL AND COMBUSTION 3 (2), 90-103
|
|
INCREASING PROPULSIVE FORCE IN JET ENGINE USING DB INJECTORS
F OMMI, K NEKOFAR, E MOVAHEDNEJAD
|
|
Estimating the distribution of size and velocity of spray droplets with
the maximum entropy method using upstream flow
SH Moosavya, F Ommi
|