| Year |
Title |
| 2023 |
Experimental-numerical analysis of ductile damage modeling of aluminum alloy using a hybrid approach: ductile fracture criteria and adaptive neural-fuzzy system (ANFIS)
H Talebi-Ghadikolaee, H Moslemi Naeini, AH Rabiee, ...
International Journal of Modelling and Simulation 43 (5), 736-751
|
| 2023 |
Numerical And Experimental Investigation Of Twisting Defect Of Symmetrical Channel Section With Asymmetrical Holes Formed By Cold Roll Forming
H Moslemi Naeini, H Talebi Ghadikolaee
Modares Mechanical Engineering 23 (8), 449-454
|
| 2023 |
Improvement of material flow in tube hydroforming by advanced sealing methods
MM Kasaei, HM Naeini, B Abbaszadeh, SJ Hashemi, LFM da Silva
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of …
|
| 2023 |
A microscale constitutive model for thin stainless steel sheets considering
size effect
MK Firouzjaei, HM Naeini, MM Kasaei, MJ Mirnia, LFM da Silva
Proceedings of the Institution of Mechanical Engineers, Part L: Journal
of …
|
| 2023 |
A study on spring-back of pre-punched profiles in cold roll forming process
S Hajiahmadi, H Moslemi Naeini, H Talebi-Ghadikolaee, R Safdarian, ...
Karafan Quarterly Scientific Journal
|
| 2023 |
Experimental investigation and modeling of fiber metal laminates hydroforming
process by GWO optimized neuro-fuzzy network
AH Rabiee, E Sherkatghanad, A Zeinolabedin Beygi, H Moslemi Naeini,
...
Journal of Computational & Applied Research in Mechanical Engineering
…
|
| 2023 |
Deformation length in flexible roll forming
H Badparva, HM Naeini, MM Kasaei, YD Asl, B Abbaszadeh, ...
The International Journal of Advanced Manufacturing Technology, 1-10
|
| 2023 |
Mechanical properties of extruded continuous glass fiber reinforced wood
Particle/HDPE composites: Effects of glass bundle tex and arrangement
M Pourghayoumi, A Jamali, AH Behravesh, M Mazdi, SK Hedayati, ...
Journal of Composite Materials, 00219983221151033
|
| 2022 |
Numerical and experimental investigation of fracture in roll forming process
using Lou–Huh fracture criterion
MS Zeinali, HM Naeini, H Talebi-Ghadikolaee, V Panahizadeh
Arabian Journal for Science and Engineering 47 (12), 15591-15602
|
| 2022 |
Effect of Flower Pattern Design on the Springback of High Strength Steel
in Cold Roll Forming Process of Pipes
MK Firouzjaei, HM Naeini, MM Kasaei, B Abbaszadeh, LFM da Silva
International Conference on Mechanics of Solids, 49-61
|
| 2022 |
Fracture prediction of AA6061-T6 sheet in bending process using Gurson–Tvergaard–Needleman
model
M Khademi, HM Naeini, MJ Mirnia, MM Kasaei, LFM da Silva
Proceedings of the Institution of Mechanical Engineers, Part L: Journal
of …
|
| 2022 |
Experimental-numerical analysis of ductile damage modeling of aluminum alloy
using a hybrid approach: ductile fracture criteria and adaptive neural-fuzzy
system (ANFIS)
H Talebi-Ghadikolaee, H Moslemi Naeini, AH Rabiee, ...
International Journal of Modelling and Simulation, 1-16
|
| 2022 |
A constitutive model for stainless steel 304 sheet considering size effect
in micro-scale
M Karimi Firouzjaei, H Moslemi Naeini, MM Kasaei, MJ Mirnia
Modares Mechanical Engineering 22 (8), 519-528
|
| 2022 |
Investigation of over-bending defect in the cold roll forming of U-channel
section using experimental and numerical methods
B Shirani Bidabadi, H Moslemi Naeini, R Safdarian, H Barghikar
Proceedings of the Institution of Mechanical Engineers, Part B: Journal
of …
|
| 2022 |
Prediction of 6061-T6 Aluminum Fracture Behavior Using the Extended GTN
Criterion
M Khademi, H Moslemi Naeini, MJ Mirnia
Modares Mechanical Engineering 22 (7), 485-496
|
| 2022 |
Effect of flower pattern on the curvature of high-strength steel pipe in
roll forming
M Karimi Firouzjaei, H Moslemi Naeini, B Abbaszadeh, MM Kasaei
Analytical and Numerical Methods in Mechanical Design 1 (1), 9-18
|
| 2022 |
Formability enhancement of ultrafine-grained pure copper sheets produced
by accumulative roll bonding aided by electromagnetic forming
M Afrasiab, Y Hojjat, G Faraji, H Moslemi Naeini
The International Journal of Advanced Manufacturing Technology 120 (11-12
…
|
| 2022 |
Predictive modeling of damage evolution and ductile fracture in bending
process
H Talebi-Ghadikolaee, HM Naeini, ET Ghadikolaee, MJ Mirnia
Materials Today Communications 31, 103543
|
| 2022 |
Experimental investigation of the effect of natural microfibers on the mode
I fracture toughness of plain-woven laminated composites
A Zeinolabedin Beygi, M Salamat-talab, A Farrokhabadi, ...
Modares Mechanical Engineering 22 (2), 71-79
|
| 2021 |
Investigation of parameters affecting deformation length in flexible roll
forming process
H Moslemi Naeini, MM Kasaei, Y Dadgar Asl, B Abbaszadeh
Modares Mechanical Engineering 22 (1), 47-56
|
| 2021 |
Experimental study and sobol sensitivity analysis in optimizing the effective
parameters of dry turning process of aluminum alloy 6061-T6
V Tahmasbi, A Zeinolabedin Beygi, H Moslemi Naeini
Iranian Journal of Manufacturing Engineering 8 (8), 12-23
|
| 2021 |
Formability Enhancement of Ultra-Fine Grained Pure Copper Sheets Produced
by Accumulative Roll Bonding Aided by Electromagnetic Forming
Y Hojjat, G Faraji, HM Naeini
|
| 2021 |
Modeling and predicting the important properties of the PVC/glass fiber
composite laminates in the production process by the TLBO-ANFIS approach
E Sherkatghanad, H Moslemi Naeini, AH Rabiee, A Zeinolabedin Beygi,
...
Iranian Journal of Materials Forming 8 (4), 63-75
|
| 2021 |
Presentation of a new construction methodology and experimental study of
the energy absorption of pyramid core sandwich panels
ئاکو پارسا, مجتبی یزدانی
مجله علمی پژوهشی مهندسی ساخت و تولید ایران 8 (7), 10-19
|
| 2021 |
On the prediction of wrinkling in flexible roll forming
MM Kasaei, H Moslemi Naeini, B Abbaszadeh, AH Roohi, MB Silva, ...
The International Journal of Advanced Manufacturing Technology 113,
2257-2275
|
| 2021 |
Investigation on the effects of the joint type on the driven out bead in
the welded pipes produced by high-frequency induction welding
M Ghaffarpour, D Akbari, HM Naeini
Proceedings of the Institution of Mechanical Engineers, Part L: Journal
of …
|
| 2020 |
Ductile fracture prediction of AA6061-T6 in roll forming process
H Talebi-Ghadikolaee, HM Naeini, MJ Mirnia, MA Mirzai, H Gorji, ...
Mechanics of Materials 148, 103498
|
| 2020 |
Modeling of ductile damage evolution in roll forming of U-channel sections
H Talebi-Ghadikolaee, HM Naeini, MJ Mirnia, MA Mirzai, S Alexandrov,
...
Journal of Materials Processing Technology 283, 116690
|
| 2020 |
Investigation of hot metal gas forming process of square parts
M Nasrollahzade, SJ Hashemi, H Moslemi Naeini, A Roohi, ...
Journal of Computational & Applied Research in Mechanical Engineering
…
|
| 2020 |
Calculation of springback with considering of hardening laws in the cold
roll forming process of the steel plate
J Naofal, H Moslemi Naeini, S Mazdak
Journal of Solid and Fluid Mechanics 10 (2), 1-10
|
| 2020 |
Study of the effect of calibration procedure on the accuracy of the phenomenological
ductile fracture criteria in sheet metal forming
H Talebi-Ghadikolaee, H Moslemi Naeini, MJ Mirnia, MA Mirzai, H Gorji,
...
Journal of Solid and Fluid Mechanics 10 (1), 1-16
|
| 2020 |
Fracture analysis on U-bending of AA6061 aluminum alloy sheet using phenomenological
ductile fracture criteria
H Talebi-Ghadikolaee, HM Naeini, MJ Mirnia, MA Mirzai, H Gorji, ...
Thin-Walled Structures 148, 106566
|
| 2019 |
Experimental and numerical investigation of failure during bending of AA6061
aluminum alloy sheet using the modified Mohr-Coulomb fracture criterion
H Talebi-Ghadikolaee, H Moslemi Naeini, MJ Mirnia, MA Mirzai, ...
The International Journal of Advanced Manufacturing Technology 105,
5217-5237
|
| 2019 |
Effects of hardening model and variation of elastic modulus on springback
prediction in roll forming
J Naofal, H Moslemi Naeini, S Mazdak
Metals 9 (9), 1005
|
| 2019 |
Optimization of required torque and energy consumption in the roll forming
process
B Shirani Bidabadi, H Moslemi Naeini, R Azizi Tafti, Y Tajik
International Journal on Interactive Design and Manufacturing (IJIDeM)
13 …
|
| 2019 |
Geometry Effects of Asymmetrical Channel Sections on Common Defects in the
Roll Forming Process
Y Tajik, H Moslemi Naeini, R Azizi Tafti, D Akbari, MM Kasaei
Journal Of Applied and Computational Sciences in Mechanics 30 (2), 1-16
|
| 2019 |
Effect of forming parameters on edge wrinkling in cold roll forming of wide
profiles
H Mohammdi Najafabadi, H Moslemi Naeini, R Safdarian, MM Kasaei, ...
The International Journal of Advanced Manufacturing Technology 101,
181-194
|
| 2018 |
Numerical and experimental investigation of sizing process of high strength
pipes producing by cold roll forming
H Yousefian, H Moslemi Naeini, R Azizi Tafti, B Abbaszadeh
Modares Mechanical Engineering 18 (9), 173-179
|
| 2018 |
A strategy to reduce the twist defect in roll-formed asymmetrical-channel
sections
Y Tajik, HM Naeini, RA Tafti, BS Bidabadi
Thin-Walled Structures 130, 395-404
|
| 2018 |
Numerical and experimental study of the edge wrinkling defect of cold roll
forming of wide profiles
H Mohammadi Najafabadi, H Moslemi Naeini, R Safdarian, D Akbari, ...
Iranian Journal of Manufacturing Engineering 5 (1), 28-36
|
| 2018 |
Investigation and analysis of glass fabric/PVC composite laminates processing
parameters
V Zal, H Moslemi Naeini, AR Bahramian, AH Behravesh, B Abbaszadeh
Science and Engineering of Composite Materials 25 (3), 529-540
|
| 2018 |
Forming of closed-cell aluminum foams under thermal loadings: experimental
investigation
AH Roohi, H Moslemi Naeini, M Hoseinpour Gollo, M Soltanpour, ...
The International Journal of Advanced Manufacturing Technology 95, 3919-3928
|
| 2018 |
Effect of Sealing Position on Bulge Height in Hydroforming of Aluminum Tubes
MM Kasaei, J Shahbazi Karami, B Abbaszadeh, SJ Hashemi, ...
Journal Of Applied and Computational Sciences in Mechanics 29 (1), 81-96
|
| 2018 |
Appropriate Flower Pattern for Cold Roll Forming of Hat Channel Section
R Safdarian, H Moslemi Naeini, M Salmani Tehrani
Amirkabir Journal of Mechanical Engineering 49 (4), 773-784
|
| 2018 |
Numerical and experimental investigation on flower pattern design methods
in cold roll forming process of a high strength steel pipe
M Karimi Firouzjaei, H Moslemi Naeini, HR Farahmand, B Abbaszadeh, ...
Modares Mechanical Engineering 17 (10), 259-270
|
| 2018 |
Codification of scan path parameters and development of perimeter scan strategies
for 3D bowl-shaped laser forming
A Tavakoli, HM Naeini, AH Roohi, MH Gollo, SI Shahabad
Optics & Laser Technology 98, 121-133
|
| 2017 |
Effect of bend curve on web warping in flexible roll formed profiles
R Rezaei, H Moslemi Naeini, RA Tafti, MM Kasaei, M Mohammadi, ...
The International Journal of Advanced Manufacturing Technology 93, 3625-3636
|
| 2017 |
Evaluation of the effect of aluminum surface treatment on mechanical and
dynamic properties of PVC/aluminum/fiber glass fiber metal laminates
V Zal, H Moslemi Naeini, AR Bahramian, H Abdollahi
Proceedings of the Institution of Mechanical Engineers, Part E: Journal
of …
|
| 2017 |
Optimization of circular scan path to produce bowl shapes in 3D laser forming
process
A Tavakoli, H Moslemi Naeini, AH Roohi, M Hoseinpour Gollo, ...
Journal of Laser Applications 29 (4), 042001
|
| 2017 |
Determining optimized radial scan path in 3D laser forming of steelAISI
304 plates to produce bowl shapes
A Tavakoli, H Moslemi Naeini, AH Roohi, M Hoseinpour Gollo, ...
The International Journal of Advanced Manufacturing Technology 91, 3457-3465
|
| 2017 |
An experimental investigation of parameters effect on laser forming of Al6061-T6
sheets
AH Roohi, H Moslemi Naeini, M Hoseinpour Gollo
Proceedings of the Institution of Mechanical Engineers, Part L: Journal
of …
|
| 2017 |
Experimental and numerical study of required torque in the cold roll forming
of symmetrical channel sections
BS Bidabadi, HM Naeini, RA Tafti
Journal of Manufacturing Processes 27, 63-75
|
| 2017 |
Experimental investigation of laser forming process to produce dome-shaped
products
SI Shahabad, HM Naeini, AH Roohi, A Tavakoli, M Nasrollahzade
The International Journal of Advanced Manufacturing Technology 90, 1051-1057
|
| 2017 |
A new procedure for finite element simulation of forming process of non-homogeneous
composite laminates and FMLs
V Zal, HM Naeini, J Sinke, AR Bahramian, M Abouhamzeh, R Benedictus
Composite Structures 163, 444-453
|
| 2017 |
Investigation of the effect of temperature and layup on the press forming
of polyvinyl chloride-based composite laminates and fiber metal laminates
V Zal, HM Naeini, AR Bahramian, J Sinke
The International Journal of Advanced Manufacturing Technology 89, 207-217
|
| 2017 |
Height prediction of dome-shaped products in laser forming process
SI Shahabad, HM Naeini, AH Roohi, M Soltanpour, A Tavakoli
The International Journal of Advanced Manufacturing Technology 88, 2227-2236
|
| 2017 |
Multiobjective optimization of hot metal gas forming process to production
of square parts using neural network and genetic algorithm
M Nasrollahzadeh, J Shahbazi Karami, H Moslemi Naeini, SJ Hashemi, ...
Modares Mechanical Engineering 16 (10), 364-374
|
| 2017 |
Experimental Study of the Roll Forming of PVC/Glass Fabric Composite Laminates
V Zal, HM Naeini, AR Bahramian, B Shirani, AH Behravesh
Journal of Applied and Computational Sciences in Mechanics 28 (2)
|
| 2017 |
An investigation on bend curve in the transition zone on web warping of
channels with variable width in the flexible roll forming process
R Rezaei, HM Naeini, RA Tafti, MM Kasaei, B Abbaszadeh, ...
Mechanical Engineering 48 (4)
|
| 2016 |
Experimental investigation on the roll forming of PVC/aluminum/glass fabric
FMLs into channel section profiles
V Zal, H Moslemi Naeini, AR Bahramian, J Shahbazi Karami
Modares Mechanical Engineering 16 (9), 207-215
|
| 2016 |
Experimental study of bowing defects in pre-notched channel section products
in the cold roll forming process.
B Shirani Bidabadi, H Moslemi Naeini, R Azizi Tafti, H Barghikar
International Journal of Advanced Manufacturing Technology 87
|
| 2016 |
Experimental evaluation of blanking and piercing of PVC based composite
and hybrid laminates
V Zal, HM Naeini, AR Bahramian, B Abbaszadeh
Advances in Manufacturing 4, 248-256
|
| 2016 |
Experimental and numerical study of bowing defects in cold roll-formed,
U-channel sections
BS Bidabadi, HM Naeini, MS Tehrani, H Barghikar
Journal of Constructional Steel Research 118, 243-253
|
| 2016 |
Experimental investigation of Aluminum tubes hot gas forming and production
of square cross-section specimens
M Nasrollahzade, H Moslemi Naeini, SJ Hashemi, B Abbaszadeh, ...
Modares Mechanical Engineering 15 (12), 435-442
|
| 2016 |
Investigation of the effect of processing temperature on the elastic and
viscoelastic properties of PVC/fiberglass composite laminates
V Zal, H Moslemi Naeini, AR Bahramian, H Abdollahi, AH Behravesh
Modares Mechanical Engineering 15 (11), 9-16
|
| 2016 |
Effects of temperature gradient magnitude on bending angle in laser forming
process of aluminium alloy sheets
AH Roohia, NH MOSLEMI, GM HOSEINPOUR, KJ SHAHBAZI, ...
JOURNAL OF COMPUTATIONAL AND APPLIED RESEARCH IN MECHANICAL ENGINEERING
…
|
| 2015 |
Experimental investigation of the ovality of holes on pre-notched channel
products in the cold roll forming process
BS Bidabadi, HM Naeini, RA Tafti, S Mazdak
Journal of materials processing technology 225, 213-220
|
| 2015 |
Revisiting the wrinkling limits in flexible roll forming
MM Kasaei, HM Naeini, GH Liaghat, CMA Silva, MB Silva, PAF Martins
The Journal of Strain Analysis for Engineering Design 50 (7), 528-541
|
| 2015 |
Prediction of Required Torque in Cold Roll Forming Process of a Channel
Sections Using Artificial Neural Networks
Y Dadgar Asl, M Tajdari, H Moslemi Naeini, B Davoodi, R Azizi Tafti,
...
Modares Mechanical Engineering 15 (7), 209-214
|
| 2015 |
On the random-based closed-cell metal foam modeling and its behavior in
laser forming process
AH Roohi, HM Naeini, MH Gollo, M Soltanpour, M Abbaszadeh
Optics & Laser Technology 72, 53-64
|
| 2015 |
The effects of forming parameters on the cold roll forming of channel section
R Safdarian, HM Naeini
Thin-Walled Structures 92, 130-136
|
| 2015 |
Prediction of Bursting in Warm Tube Hydroforming using Modified Ductile
Fracture Criteria.
SJ Hashemi, HM Naeini, G Liaghat, JS Karami, AH Roohi
Modares Mechanical Engineering 14 (16)
|
| 2015 |
A comparative study of forming limit diagram prediction of tailor welded
blanks
R Safdarian, RMN Jorge, AD Santos, HM Naeini, MPL Parente
International journal of material forming 8, 293-304
|
| 2015 |
Prediction of bulge height in warm hydroforming of aluminum tubes using
ductile fracture criteria
SJ Hashemi, HM Naeini, GH Liaghat, RA Tafti
Archives of Civil and Mechanical Engineering 15 (1), 19-29
|
| 2015 |
Experimental Investigation on Process Parameters Effects in Laser Forming
of Closed-cell Aluminium Foam Sheets
AH Roohi, NH MOSLEMI, GM HOSEINPOUR, M Soltanpour
JOURNAL OF APPLIED AND COMPUTATIONAL SCIENCES IN MECHANICS (JOURNAL
OF …
|
| 2015 |
Flexible roll forming
MM Kasaei, HM Naeini, B Abbaszadeh, MB Silva, PAF Martins
Materials forming and machining, 51-71
|
| 2014 |
Effects of process parameters on bending magnitude in laser forming and
determine an equation to predict bending angle
AH Roohi, H Moslemi Naeini, M Hoseinpour
Modares Mechanical Engineering 14 (8), 75-82
|
| 2014 |
Forming limit diagram of aluminum AA6063 tubes at high temperatures by bulge
tests
SJ Hashemi, HM Naeini, G Liaghat, RA Tafti, F Rahmani
Journal of Mechanical Science and Technology 28, 4745-4752
|
| 2014 |
Investigation of web warping of profiles with changing cross section in
flexible roll forming process
M Mohammadi, H Moslemi Naeini, MM Kasaei, M Salmani Tehrani, ...
Modares Mechanical Engineering 14 (6), 72-80
|
| 2014 |
Feasibility study on optimized process conditions in warm tube hydroforming
SMH Seyedkashi, HM Naeini, YH Moon
Journal of Mechanical Science and Technology 28, 2845-2852
|
| 2014 |
Analytical prediction of limit strains and limit stresses in hydroforming
of anisotropic aluminum tubes
H Moslemi Naeini, J Hashemi, G Liaghat, M Mohammadi, ...
Modares Mechanical Engineering 14 (2), 133-140
|
| 2014 |
Prediction of maximum initial strip width in the cage roll forming process
of ERW pipes using edge buckling criterion
MM Kasaei, HM Naeini, RA Tafti, MS Tehrani
Journal of materials processing technology 214 (2), 190-199
|
| 2014 |
Analysis and optimization of tensile strength of PVC/fiberglass composite
laminates
V Zal, HM Naeini, AR Bahramian, B Abbaszadeh, H Abdollahi
4th international conference on composites (CCFA4), 16-17
|
| 2014 |
Higher Desirability in Solving Multiple Response Optimization Problems with
Committee Machine
SJ Golestaneh, N Ismail, MKA Mohd Ariffin, SH Tang, HM Naeini, ...
Applied Mechanics and Materials 564, 608-613
|
| 2014 |
A combinational approach for experts of committee machine in wire bonding
problem solving
SJ Golestaneh, I Napsiah, MKAB Mohd Ariffin, SH Tang, HM Naeini, ...
Applied Mechanics and Materials 465, 751-755
|
| 2014 |
Flange wrinkling in flexible roll forming process
MM Kasaei, HM Naeini, B Abbaszadeh, M Mohammadi, M Ghodsi, ...
Procedia Engineering 81, 245-250
|
| 2013 |
Experimental and theoretical investigation of thickness ratio effect on
the formability of tailor welded blank
RS Korouyeh, HM Naeini, MJ Torkamany, GH Liaghat
Optics & Laser Technology 51, 24-31
|
| 2013 |
Study of the effects of work hardening models on spring-back in cold roll
forming of U-channels
H Moslemi Naeini
Modares Mechanical Engineering 13 (6), 74-82
|
| 2013 |
Numerical and experimental study of the efficient parameters on hydromechanical
deep drawing of square parts
F Rahmani, SJ Hashemi, H Moslemi Naeini, H Deylami Azodi
Journal of Materials Engineering and Performance 22, 338-344
|
| 2013 |
Improvement of Committee Machine Performance to Solve Multiple Response
Optimization Problems
SJ Golestaneh, N Ismail, SH Tang, MKAM Ariffin, H Moslemi
International Journal of Engineering & Technology 13, 52-63
|
| 2013 |
Theoretical extension of elastic-perfectly plastic deformation length in
roll forming of a channel section
RA Tafti, HM Naeini, MS Tehrani, BF Rolfe, M Weiss
International Journal of Materials and Product Technology 47 (1-4),
33-45
|
| 2013 |
Desirability improvement of committee machine to solve multiple response
optimization problems
SJ Golestaneh, N Ismail, MKAM Ariffin, SH Tang, HM Naeini
Advances in Artificial Neural Systems 2013, 11-11
|
| 2013 |
Numerical and experimental investigation of temperature effect on thickness
distribution in warm hydroforming of aluminum tubes
SJ Hashemi, H Moslemi Naeini, G Liaghat, R Azizi Tafti, F Rahmani
Journal of Materials Engineering and Performance 22, 57-63
|
| 2013 |
Effect of Friction on Weld-Line Movement and Thickness Distribution in Hydro-Mechanical
Deep Drawing of Tailor-Welded Blanks (TWBs)
E Rahimi, H Moslemi-Naeini, R Safdarian, AH Roohi
AEROSPACE MECHANICS JOURNAL 9 (333), 31-43
|
| 2012 |
Experimental and numerical investigation of an adaptive simulated annealing
technique in optimization of warm tube hydroforming
SMH Seyedkashi, H Moslemi Naeini, G Liaghat, M Mosavi Mashadi, ...
Proceedings of the Institution of Mechanical Engineers, Part B: Journal
of …
|
| 2012 |
Forming limit diagram prediction of tailor-welded blank using experimental
and numerical methods
R Safdarian Korouyeh, H Moslemi Naeini, G Liaghat
Journal of Materials Engineering and Performance 21, 2053-2061
|
| 2012 |
External force-assisted laser forming process for gaining high bending angles
AH Roohi, MH Gollo, HM Naeini
Journal of Manufacturing Processes 14 (3), 269-276
|
| 2012 |
The effect of tube dimensions on optimized pressure and force loading paths
in tube hydroforming process
SMH Seyedkashi, HM Naeini, GH Liaghat, MM Mashadi, M Mirzaali, ...
Journal of mechanical science and technology 26, 1817-1822
|
| 2012 |
Application of simulated annealing method to pressure and force loading
optimization in tube hydroforming process
M Mirzaali, SMH Seyedkashi, GH Liaghat, HM Naeini, YH Moon
International Journal of Mechanical Sciences 55 (1), 78-84
|
| 2012 |
Experimental analyses of bending angle by a pulsed Nd: YAG laser in sheet
metal forming process
MH Gollo, HM Naeini, GH Payganeh, S Ding, SM Mahdavian
Scientific Research and Essays 7 (3), 279-287
|
| 2012 |
Numerical and Experimental Investigations on Strip Deformation in Cage Roll
Forming Process for Pipes with Small Thickness/Diameter Ratio
MM Kasaei, H Moslemi Naeini, M Salmani Tehrani, R Azizi Tafti, E Rahimi
Journal Of Applied and Computational Sciences in Mechanics 23 (1), 1-14
|
| 2012 |
Effect of Fluid Pressure on Weld-Line Movement and Thickness Distribution
in Hydro-Mechanical Deep Drawing of Tailor-Welded Blanks (TWBs)
E Rahimi, H Moslemi Naeini, H Deilami Azodi, S Mazdak, MM Kasaee
Journal Of Applied and Computational Sciences in Mechanics 23 (1), 53-66
|
| 2012 |
Effect of laser welding parameters on forming behavior of tailor welded
blanks
RS Korouyeh, HM Naeini, MJ Torkamany, J Sabaghzadee
Advanced Materials Research 445, 406-411
|
| 2012 |
Investigation of weld line movement in tailor welded blank forming
RS Korouyeh, HM Naeini, GH Liaghat, MM Kasaei
Advanced Materials Research 445, 39-44
|
| 2012 |
The effect of material and geometric variables on the straightness of a
roll formed channel
R Azizitafti, M Weiss, HM Naeini, MS Tehrani
International Conference on Advances in Materials and Processing …
|
| 2011 |
Comparison of strip deformation between the contour roll forming (CORF)
process and cage roll forming (CARF) process of HFW pipes
MM Kasaei, HM Naeini
3rd International conference on manufacturing engineering, ICME2011,
Tehran …
|
| 2011 |
Statistical analysis of parameter effects on bending angle in laser forming
process by pulsed Nd: YAG laser
MH Gollo, SM Mahdavian, HM Naeini
Optics & Laser Technology 43 (3), 475-482
|
| 2011 |
Investigation of Aluminum‐Copper Tube Hydroforming with Axial Feeding
M Parto D, SMH Seyedkashi, G Liaghat, HM Naeini, V Panahizadeh R
AIP Conference Proceedings 1315 (1), 475-480
|
| 2011 |
Comparison of the Folding Behaviour in the Empty and Foam‐Filled Honeycombs
via Drop Hammer Tests
A Niknejad, GH Liaghat, HM Naeini, AH Behravesh
AIP Conference Proceedings 1315 (1), 15-20
|
| 2011 |
Numerical and experimental investigation of roll forces and torques in cold
roll forming of a channel section
B Davoodi, HM Naeini, YD Asl, R Azizi T, MM Kasaei, VR Panahizadeh
AIP conference proceedings 1315 (1), 581-586
|
| 2011 |
Numerical and experimental investigation of strip deformation in cage roll
forming process for pipes with low ratio of thickness/diameter
MM Kasaei, HM Naeini, MS Tehrani, RA Tafti
AIP Conference Proceedings 1315 (1), 593-598
|
| 2011 |
NUMERICAL AND EXPERIMENTAL INVESTIGATIONS ON STRIP DEFORMATION IN CAGE ROLL
FORMING PROCESS FOR PIPES WITH SMALL THICKNESS/DIAMETER RATIO
MM KASAEI, NH MOSLEMI, TM SALMANI, TR AZIZI, E RAHIMI
JOURNAL OF APPLIED AND COMPUTATIONAL SCIENCES IN MECHANICS (JOURNAL
OF …
|
| 2011 |
Investigation of initial strip width effect on the profile of deformed strip
in the cage roll forming process of HFW pipes
MM Kasaei, HM Naeini, MS Tehrani, R Safdarian, SJ Hashemi
14th International Conference on Advances in Materials and Processing
…
|
| 2011 |
Research on edge buckling defect in contour cold roll forming process of
HFW pipes
MM Kasaei, HM Naeini, MS Tehrani, RA Tafti, Y Dadgar
14th International confer-ence on Advances in Materials and Processing
…
|
| 2011 |
Fe simulation and experimental study of tube hydroforming process for aa1050
alloy at various temperatures
HM Naeini, GH Liaghat, SJ Hashemi Ghiri, SMH Seyedkashi
Advanced Materials Research 264, 96-101
|
| 2011 |
Experimental and numerical investigation on laser bending process
GM HOSEINPOUR, NH MOSLEMI, ANB MOSTAFA
JOURNAL OF COMPUTATIONAL AND APPLIED RESEARCH IN MECHANICAL ENGINEERING
…
|
| 2011 |
Numerical and experimental study of two-layered tube forming by hydroforming
process
SMH Seyedkashi, GH Liaghat, HM Naeini, SM Mahdavian, ...
Advanced Materials Research 264, 102-107
|
| 2011 |
A committee machine approach to multiple response optimization
SJ Golestaneh, N Ismail, SH Tang, M Ariffin, HM Naeini, AA Maghsoudi
International Journal of Physical Sciences 6 (35), 7935-7949
|
| 2011 |
Optimization of tube hydroforming process using simulated annealing algorithm
M Mirzaali, GH Liaghat, HM Naeini, SMH Seyedkashi, K Shojaee
Procedia Engineering 10, 3012-3019
|
| 2011 |
Theoretical and experimental studies of the instantaneous folding force
of the polyurethane foam-filled square honeycombs
A Niknejad, GH Liaghat, HM Naeini, AH Behravesh
Materials & Design 32 (1), 69-75
|
| 2010 |
Theoretical Calculation of the Instantaneous Folding Force in a Single-Cell
Square Column under Axial Loading
A Niknejad, GH Liaghat, H Moslemi Naeini, AH Behravesh
Modares Mechanical Engineering 10 (3), 21-30
|
| 2010 |
A theoretical formula for predicting the instantaneous folding force of
the first fold in a single cell hexagonal honeycomb under axial loading
A Niknejad, GH Liaghat, H Moslemi Naeini, AH Behravesh
Proceedings of the Institution of Mechanical Engineers, Part C: Journal
of …
|
| 2010 |
Experimental and theoretical investigation of the first fold creation in
thin walled columns
A Niknejad, GH Liaghat, HM Naeini, AH Behravesh
Acta Mechanica Solida Sinica 23 (4), 353-360
|
| 2010 |
Study of Forming Parameters in Hydroforming of a Thin-Walled ASTM C11000
Copper Tube
SMH Seyedkashi, GH Liaghat, HM Naeini, M Hoseinpour Gollo
Advanced Materials Research 83, 133-142
|
| 2010 |
Investigation of the folding angle variations during the folding progress
in the columns
A Niknejad, GH Liaghat, H Moslemi Naeini, AH Behravesh
Trends in Applied Sciences Research 5 (1), 56-63
|
| 2010 |
Theoretical and experimental study of the effects of process parameters
on bending angle in laser bending process
MH Gollo, SM Mahdavian, HM Naeini, GH Liaghat, S Jelvani
Modares Mechanical Engineering 10 (3), 67-86
|
| 2010 |
A numerical and experimental study of sheet metal bending by pulsed ND:
YAG laser with doe method
M Hosseinpour Gollo, HM Naeini, GH Liaghat, S Jelvani, MJ Torkamany
Advanced Materials Research 83, 1076-1083
|
| 2010 |
Modified committee neural networks for prediction of machine failure times
N Ismail, SJ Golestaneh, SH Tang, M Ariffin, HM Naeini, D Rouhani
The 3rd national intelligent systems and information technology symposium
…
|
| 2009 |
Experimental investigation of the maximum axial force in the folding process
of aluminum square columns
A Niknejad, GH Liaghat, AH Behravesh, H Moslemi Naeini
International conference on manufacturing systems engineering, Rome,
Italy
|
| 2008 |
Theoretical investigation of the instantaneous folding force during the
first fold creation in a square column
A Niknejad, GH Liaghat, AH Behravesh, HM Naeini
International conference on applied mechanics and mechanical engineering
…
|
| 2008 |
Analysis of rupture instability in the hydromechanical deep drawing of cylindrical
cups
HD Azodi, H Moslemi Naeini, MH Parsa, GH Liaghat
The International Journal of Advanced Manufacturing Technology 39, 734-743
|
| 2008 |
Investigating the weight of longitudinal out-of-plane bending energy in
predicting “deformation length” in roll-forming of symmetric channel section
H Moslemi Naeini, M Salmani Tehrani, R Safdarian
Proceedings of the 12th MetalForming Conference, 141-144
|
| 2008 |
Modelling of tool life in turning process using experimental method
M Mehrban, D Naderi, V Panahizadeh, H Moslemi Naeini
International journal of material forming 1, 559-562
|
| 2008 |
An experimental study of sheet metal bending by pulsed Nd: YAG laser with
DOE method
M Hoseinpour Gollo, H Moslemi Naeini, GH Liaghat, MJ Torkamany, ...
International Journal of Material Forming 1, 137-140
|
| 2007 |
Numerical analysis of plastic deformation of a circular sheet metal subjected
to transverse impact loading
SH Ghaderi, HM Naeini, GH Liaghat
International journal of impact engineering 34 (4), 668-680
|
| 2006 |
Analysis of deformation behaviour of the large diameter pipe by UO bending
process
HM Naeini, GH Liaghat, R Mahshid, A Sajedinejad, K Vahedi, ...
Journal of materials processing technology 177 (1-3), 179-182
|
| 2006 |
Localized edge buckling in cold roll-forming of circular tube section
MS Tehrani, HM Naeini, P Hartley, H Khademizadeh
Journal of Materials Processing Technology 177 (1-3), 617-620
|
| 2006 |
Localised edge buckling in cold roll-forming of symmetric channel section
MS Tehrani, P Hartley, HM Naeini, H Khademizadeh
Thin-walled structures 44 (2), 184-196
|
| 2005 |
Localised bending defects in circular tube roll-forming
MS Tehrani, P Hartley, HM Naeini, M Farzin, D Banabic
Proceedings of the 8th ESAFORM Conference on Material Forming
|
| 2005 |
Design method of rolls for reshaping processes of pipes with pentagonal
cross-sections
HM Naeini, M Kiuchi, T Kitawaki, R Kuromatsu
Journal of materials processing technology 169 (1), 5-8
|
| 2005 |
Finite element simulation of hot forming process by using flow stress prediction
model
NH MOSLEMI, M Maerefat, M Soltanpour
IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY TRANSACTION B-ENGINEERING
29 (2 …
|
| 2005 |
The mechanics of normal and oblique penetration of conical projectiles into
multi layer metallic targets
GHH LIAGHAT, NH MOSLEMI, S Felli
IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY TRANSACTION B-ENGINEERING
29 (2 …
|
| 2003 |
FE-Based Analysis of Hot Forming Process Using the Flow Stress Prediction
Model
HM Naeini, M Maerefat, M Soltanpour
Computational Methods in Engineering 22 (1), 143-153
|
| 2001 |
Computer aided design of rolls for reshaping processes from round pipes
to “channel-type” pipes
M Kiuchi, HM Naeini, K Shintani
Journal of Materials Processing Technology 111 (1-3), 193-197
|
| 2000 |
Automated Design System of Rolls for Reshaping of Circular Pipes into Channel-Type
Pipes
M Kiuchi, HM Naeini, K Shintani
JOURNAL-JAPAN SOCIETY FOR TECHNOLOGY OF PLASTICITY 41 (5; ISSU 472),
45-49
|
| 1999 |
Numerical Analysis of Reshaping Process from Round Pipes to Cross-Type"
Pipes
M Kiuchi, K Shintani, HM Naeini
JOURNAL-JAPAN SOCIETY FOR TECHNOLOGY OF PLASTICITY 40, 58-62
|
| 1998 |
Numerical analysis of round to oval reshaping process of pipes
M KIUCHI, K SHINTANI, HM NAEINI
Seisan Kenkyu 50 (8), 262-265
|
| |
Numerical and Experimental Investigation of the Effect of Parameters in
Shear Spinning Process of a Conic Sample
TB Bodaghi, D Akbari, HM Naeini
|
| |
Investigation of Forming Limit and Weld Line Movement in the Forming of
Tailor Welded Blanks using Experiment and Numerical Methods
RSKHM Naeini, M Noghabi, E Rahimi
|
| |
Theoretical Solution of Linear Hardening Elastic-plastic Deformation Length
for a Roll Formed Channel
RATHM Naeini, MSTMM Kasaei
JOURNAL OF APPLIED AND COMPUTATIONAL SCIENCES IN MECHANICS (JOURNAL
OF …
|
| |
Improvement of springback Prediction in roll forming using variation of
elastic modulus with pre-strain
J Naofal, HM Naeini, S Mazdak
|
| |
Development of a Contact Model for Analyzing a 2-D Elastic–Plastic Reshaping
Process of Pipes
S Mazdak, MJ Kheljan, MS Tehrani, H Moslemi-Naeini, G Liaghat
|
| |
The Bending Angle Prediction, Using the Size of Microstructure Change in
the Laser Forming Process
S Jelvani, HM Naeini, G Liaghat, MH Gollo
|
| |
Investigation of effective parameters in the cold roll-forming of channel
section
R Safdarian, HM Naeini, MS Tehrani, RA Tafti, MHH Nia
|
|
|
Forming Limit Curve at Neck and Forming Limit Curve at Fracture in Hydroforming
of Aluminum Tubes
HD Azodi, SJ Hashemi, HM Naeini, GH Liaghat
|
|
