| YEAR |
TITLE |
| 2023 |
Crashworthiness behavior assessment and multi-objective optimization of horsetail-inspired sandwich tubes based on artificial neural network
M Rezaei Faraz, S Hosseini, A Tarafdar, M Forghani, H Ahmadi, ...
Mechanics of Advanced Materials and Structures, 1-18
|
| 2023 |
High strain-rate and quasi-static mechanical characteristics of the natural rubber-based elastomer nanocomposite reinforced with alumina nanoparticles
M Nouraei, G Liaghat, H Ahmadi, AR Bahramian, A Taherzadeh-Fard, ...
Journal of Reinforced Plastics and Composites 42 (17-18), 871-892
|
| 2023 |
Experimental and numerical investigation on crashworthiness of composite reinforced auxetic cellular tubes
M Oloumi Doudaran, H Ahmadi, GH Liaghat, M Seidi
Mechanics of Advanced Materials and Structures, 1-23
|
| 2023 |
A comprehensive investigation of the low-velocity impact response of enhanced GFRP composites with single and hybrid loading of various types of nanoparticles
R Barbaz-Isfahani, H Dadras, S Saber-Samandari, A Taherzadeh-Fard, ...
Heliyon 9 (5)
|
| 2023 |
Investigating on the energy absorption of PA/GF6 thermoplastic composite produced by hot pressing method under low-velocity impact test
AM Manouchehri, GH Liaghat, H Ahmadi
Journal of Solid and Fluid Mechanics 13 (1), 1-13
|
| 2023 |
Energy absorption and collapse behavior of PP‐based pin‐reinforced composite sandwich panels under quasi‐static flatwise compression loading
E Pedram, H Ahmadi, A Kabiri, MG Choobar, O Razmkhah, N Fellows, ...
Polymer Composites
|
| 2023 |
An analytical investigation on the crushing behavior of thin-walled
tubes filled with a foam with strain hardening region
SS Barzigar, H Ahmadi, GH Liaghat
Thin-Walled Structures 182, 110169
|
| 2022 |
Energy absorption assessment of bio-mimicked hybrid Al/PP sandwich tube:
Experimental and Numerical Investigation
MR Faraz, H Ahmadi, G Liaghat, S Vahid, O Razmkhah, A Tarafdar
Thin-Walled Structures 181, 110116
|
| 2022 |
High strain-rate and quasi-static mechanical characteristics of the
natural rubber-based elastomer nanocomposite reinforced with alumina
nanoparticles
M Nouraei, G Liaghat, H Ahmadi, AR Bahramian, A Taherzadeh-Fard,
...
Journal of Reinforced Plastics and Composites, 07316844221141643
|
| 2022 |
An investigation of optimal auxetic cores in sandwich structures to
withstand low-velocity impact loading
M Hedayatian, A Daneshmehr, GH Liaghat
International Journal of Crashworthiness 27 (6), 1830-1842
|
| 2022 |
Dynamic analysis of single–layered graphene sheet subjected to a moving
nanoparticle: A molecular dynamics study
S Seifoori, F Ebrahimi, AM Parrany, GH Liaghat
Materials Science and Engineering: B 285, 115956
|
| 2022 |
Evaluation of the mechanical properties of fully integrated 3D printed
polymeric sandwich structures with auxetic cores: experimental and numerical
assessment
M Najafi, H Ahmadi, GH Liaghat
The International Journal of Advanced Manufacturing Technology 122
(9-10 …
|
| 2022 |
Experimental and numerical analysis of the effect of using perforated
plates in front of the target against ballistic impact
جواد نیک زارع, غلامحسین لیاقت, حامد احمدی
مجله علمی پژوهشی مهندسی ساخت و تولید ایران 9 (7),
9-22
|
| 2022 |
Effect of layering layout on the energy absorbance of bamboo-inspired
tubular composites
A Tarafdar, O Razmkhah, H Ahmadi, G Liaghat, S Chitsaz Charandabi,
...
Journal of Reinforced Plastics and Composites 41 (15-16), 602-623
|
| 2022 |
Synergistic Effects of Incorporating Various Types of Nanoparticles
on Tensile, Flexural, and Quasi-static Behaviors of GFRP Composites
R Barbaz-Isfahani, H Dadras, A Taherzadeh-Fard, MA Zarezadeh-Mehrizi,
...
Fibers and Polymers 23 (7), 2003-2016
|
| 2022 |
Crushing performance of auxetic tubes under quasi-static and impact
loading
MO Doudaran, H Ahmadi, GH Liaghat
Journal of the Brazilian Society of Mechanical Sciences and Engineering
44 …
|
| 2022 |
Energy absorption study of a new reinforced top-hat section beam under
flexural loading
N Zahedan, H Ahmadi, GH Liaghat
International Journal of Crashworthiness 27 (3), 784-799
|
| 2022 |
Investigation on the compressive properties of auxetic foams under different
loading rates
Z Nazari, H Ahmadi, G Liaghat, S Vahid
Polymer Engineering & Science 62 (5), 1720-1730
|
| 2022 |
Numerical and experimental investigation of fiber metal laminates with
elastomeric layers under low‐velocity impact
MA Zarezadeh‐mehrizi, G Liaghat, H Ahmadi, A Taherzadeh‐Fard, ...
Polymer Composites 43 (4), 1936-1947
|
| 2022 |
Analysis of ballistic impact performance and shear effect on elastomeric
and thermoset composites
SS Asemani, G Liaghat, H Ahmadi, Y Anani, SC Charandabi, ...
International Journal of Applied Mechanics 14 (02), 2250013
|
| 2022 |
Mechanical properties and energy absorption capacity of chopped fiber
reinforced natural rubber
A Taherzadeh-Fard, A Khodadadi, G Liaghat, XF Yao, MAZ Mehrizi
Composites Part C: Open Access 7, 100237
|
| 2022 |
Investigation on the flexural properties of sandwich beams with auxetic
core
M Najafi, H Ahmadi, GH Liaghat
Journal of the Brazilian Society of Mechanical Sciences and Engineering
44 …
|
| 2021 |
Experimental and numerical investigation on the multi-optimization of
reinforcing the side members of the vehicle structure
N Zahedan, H Ahmadi, GH Liaghat
Archives of Civil and Mechanical Engineering 22 (1), 25
|
| 2021 |
A comparative study of 3D printing and heat-compressing methods for
manufacturing the thermoplastic composite bone fixation plate: Design,
characterization, and in vitro …
A Kabiri, G Liaghat, F Alavi, M Ansari, SK Hedayati
Proceedings of the Institution of Mechanical Engineers, Part H:
Journal of …
|
| 2021 |
A practical review study on shaped charge in the last two decades (2000–2020)
H Mehmannavaz, A Ramezani, MA Nabakhteh, G Liaghat
International Journal of Protective Structures 12 (4), 665-693
|
| 2021 |
Quasi-static and low-velocity impact behavior of the bio-inspired hybrid
Al/GFRP sandwich tube with hierarchical core: Experimental and numerical
investigation
A Tarafdar, G Liaghat, H Ahmadi, O Razmkhah, SC Charandabi, ...
Composite Structures 276, 114567
|
| 2021 |
Characterization of MDF reinforced with Al2O3
Nano particles considering physical, mechanical and quasi-static properties
S Karkoodi, G Liaghat, HZ Hosseinabadi, H Ahmadi
Wood Material Science & Engineering 16 (6), 380-390
|
| 2021 |
Performance Comparison of Wood, Plywood, and Oriented Strand Board under
High-and Low-Velocity Impact Loadings
Z Naghizadeh, MH Pol, AO Alawode, M Faezipour, GH Liaghat, BK Via,
...
Forest Products Journal 71 (4), 362-370
|
| 2021 |
The experimental and numerical analysis of the ballistic performance
of elastomer matrix Kevlar composites
SS Asemani, G Liaghat, H Ahmadi, Y Anani, A Khodadadi, ...
Polymer Testing 102, 107311
|
| 2021 |
An experimental investigation on the effect of incorporating graphene
nanoplatelets on the low-velocity impact behavior of fiber metal laminates
A Fathi, G Liaghat, H Sabouri
Thin-Walled Structures 167, 108162
|
| 2021 |
Impact characteristics of soft composites using shear thickening fluid
and natural rubber–a review of current status
A Khodadadi, G Liaghat, A Taherzadeh-Fard, ...
Composite Structures 271, 114092
|
| 2021 |
Axial crushing responses of aluminum honeycomb structures filled with
elastomeric polyurethane foam
Y Mohamadi, H Ahmadi, O Razmkhah, G Liaghat
Thin-Walled Structures 164, 107785
|
| 2021 |
Experimental investigation of quasi-static behavior of composite and
fiber metal laminate panels modified by graphene nanoplatelets
A Fathi, G Liaghat, H Sabouri, M Chizari, H Hadavinia, ...
Journal of Reinforced Plastics and Composites 40 (13-14), 518-532
|
| 2021 |
Investigation on the energy absorption of elastomeric auxetic structures
in quasi-static and impact loading
M Parvaresh, H Ahmadi, G Liaghat
Journal of Science and Technology of Composites 8 (1), 1431-1442
|
| 2021 |
Biomechanical evaluation of glass fiber/polypropylene composite bone
fracture fixation plates: experimental and numerical analysis
A Kabiri, G Liaghat, F Alavi
Computers in Biology and Medicine 132, 104303
|
| 2021 |
Experimental and numerical investigation on the flexural behavior of
composite-reinforced top-hat shape beam
H Ahmadi, GH Liaghat
Mechanics Of Advanced Composite Structures 8 (1), 149-156
|
| 2021 |
Characterization of MDF reinforced with Al₂O₃ Nano particles considering
physical, mechanical and quasi-static properties
S Karkoodi, G Liaghat, HZ Hosseinabadi, H Ahmadi
|
| 2021 |
Effect of Al₂O₃ nanoparticles on the mechanical behaviour of aluminium-based
metal matrix composite synthesized via powder metallurgy
Z Zaiemyekeh, G Liaghat, MK Khan
Proceedings of the Institution of Mechanical Engineers, Part L:
Journal of …
|
| 2021 |
An experimental study on damage intensity in composite plates subjected
to low-velocity impacts
S Seifoori, R Izadi, GH Liaghat, AM Parrany
Polymer Testing 93, 106887
|
| 2021 |
Experimental investigation on energy absorption of auxetic structures
M Najafi, H Ahmadi, G Liaghat
Materials today: proceedings 34, 350-355
|
| 2020 |
Glass fiber/polypropylene composites with potential of bone fracture
fixation plates: Manufacturing process and mechanical characterization
A Kabiri, G Liaghat, F Alavi, H Saidpour, SK Hedayati, M Ansari,
M Chizari
Journal of Composite Materials 54 (30), 4903-4919
|
| 2020 |
Experimental and Numerical Analysis of High Velocity Impact on 2-Layer
kevlar/Elastomer Composite
G Liaghat, H Ahmadi, Y Anani
Modares Mechanical Engineering 20 (12), 2733-2745
|
| 2020 |
Experimental investigation of quasistatic penetration tests on honeycomb
sandwich panels filled with polymer foam
F Hassanpour Roudbeneh, G Liaghat, H Sabouri, H Hadavinia
Mechanics of Advanced Materials and Structures 27 (21), 1803-1815
|
| 2020 |
Buckling prediction of composite lattice sandwich cylinders (CLSC) through
the vibration correlation technique (VCT): Numerical assessment with
experimental and analytical …
D Shahgholian-Ghahfarokhi, G Rahimi, G Liaghat, R Degenhardt, ...
Composites Part B: Engineering 199, 108252
|
| 2020 |
High-velocity impact loading in honeycomb sandwich panels reinforced
with polymer foam: a numerical approach study
F Hassanpour Roudbeneh, G Liaghat, H Sabouri, H Hadavinia
Iranian Polymer Journal 29, 707-721
|
| 2020 |
Experimental and numerical investigation of the impact response of elastomer
layered fiber metal laminates (EFMLs)
A Taherzadeh-Fard, G Liaghat, H Ahmadi, O Razmkhah, SC Charandabi,
...
Composite Structures 245, 112264
|
| 2020 |
The efficiency of auxetic cores in sandwich beams subjected to low-velocity
impact
M Hedayatian, AR Daneshmehr, GH Liaghat
International Journal of Applied Mechanics 12 (06), 2050061
|
| 2020 |
Numerical and experimental investigation of impact on bilayer aluminum-rubber
composite plate
A Khodadadi, G Liaghat, D Shahgholian-Ghahfarokhi, M Chizari, B
Wang
Thin-Walled Structures 149, 106673
|
| 2020 |
Experimental and Numerical Investigation of Energy Absorption in Auxetic
Structures under Quasi-static Loading.
M Najafi, H Ahmadi, GH Liaghat
Modares Mechanical Engineering 20 (2)
|
| 2020 |
Experimental and numerical investigation on crushing of metal-composite
hybrid energy absorber under a quasi-static loading
M Tayyebati, H Ahmadi, G Liaghat
Iranian Journal of Manufacturing Engineering 6 (8), 54-66
|
| 2020 |
Numerical analysis of reactive shaped charges with bimetallic liner
into discrete layer steel target
H Mehman Navaz, GH Liaghat, MA Nabakhteh, H Fazeli, M Rouhbakhsh,
...
Modares Mechanical Engineering 20 (1), 171-179
|
| 2020 |
High velocity impact on composite sandwich panels with nano-reinforced
syntactic foam core
H Ahmadi, G Liaghat, S Chitsaz Charandabi
Thin walled structure 148
|
| 2020 |
High velocity impact response of carbon nanotubes-reinforced composite
sandwich panels
A Naghizadeh, Z., Faezipour, M., Hossein Pol, M., Liaghat, G., abdolkhani
2020 Journal of Sandwich Structures and Materials 22(2), pp. 303-324
22 (2 …
|
| 2019 |
Numerical analysis of shaped charge bimetallic liners effects on diameter
and depth of penetration into steel targets
H Mehman Navaz, GH Liaghat, S Rahmati, M Najafi, H Fazeli
Aerospace Mechanics Journal 15 (3), 93-105
|
| 2019 |
Impact response of Kevlar/rubber composite
A Khodadadi, G Liaghat, H Ahmadi, AR Bahramian, O Razmkhah
Composites Science and Technology 184, 107880
|
| 2019 |
Numerical and Experimental Analysis of Copper Electroforming on an Aluminum
Substrate as a Rotating Cone Electrode Cell
H Memannavaz, HH Pebdeni, G Liaghat, S Rahmati, M Najafi, H Fazeli
ChemistrySelect 4 (40), 11839-11847
|
| 2019 |
Experimental study on the effect of pentanediol as a chain extender
on the mechanical properties of mdi polyurethane foams
I Nateghi-Boroujeni, G Liaghat, H Ahmadi
Iran J Polym Sci Technol 32 (4), 317-326
|
| 2019 |
Experimental and numerical analysis of high velocity impact on Kevlar/Epoxy
composite plates
A Khodadadi, G Liaghat, H Ahmadi, AR Bahramian, D Shahgholian, ...
Journal of Science and Technology of Composites 6 (2), 265-274
|
| 2019 |
Experimental and numerical analysis of impact on curved nanocomposite
panels
A Bidi, G Liaghat, G Rahimi, H Hadavinia
Mechanics of Advanced Materials and Structures 26 (16), 1365-1375
|
| 2019 |
Analytical modeling of the high-velocity impact of autoclaved aerated
concrete (AAC) blocks and some experimental results
A Bayat, GH Liaghat, M Ghalami-Choobar, GD Ashkezari, H Sabouri
International Journal of Mechanical Sciences 159, 315-324
|
| 2019 |
Experimental investigation on the quasi-static mechanical behavior of
autoclaved aerated concrete insulated sandwich panels
A Bayat, G Liaghat, H Sabouri, GD Ashkezari, E Pedram, SA Taghizadeh,
...
Journal of Sandwich Structures & Materials, 1099636219857633
|
| 2019 |
Ballistic impact behaviour of glass fibre reinforced polymer composite
with 1D/2D nanomodified epoxy matrices
N Domun, C Kaboglu, KR Paton, JP Dear, J Liu, BRK Blackman, ...
Composites Part B: Engineering 167, 497-506
|
| 2019 |
Analytical and experimental investigation of high velocity impact on
foam core sandwich panel
H Ahmadi, G Liaghat
Polymer Composites 40 (6), 2258-2272
|
| 2019 |
High velocity impact behavior of Kevlar/rubber and Kevlar/epoxy composites:
a comparative study
A Khodadadi, G Liaghat, AR Bahramian, H Ahmadi, Y Anani, S Asemani,
...
Composite Structures 216, 159-167
|
| 2019 |
Effect of strain rate on deformation behavior of aluminum matrix composites
with Al2O3 nanoparticles
Z Zaiemyekeh, GH Liaghat, H Ahmadi, MK Khan, O Razmkhah
Materials Science and Engineering: A 753, 276-284
|
| 2019 |
Ballistic performance of Kevlar fabric impregnated with nanosilica/PEG
shear thickening fluid
A Khodadadi, G Liaghat, S Vahid, AR Sabet, H Hadavinia
Composites Part B: Engineering 162, 643-652
|
| 2019 |
Electrical conductivity enhancement of Carbon/Epoxy composites using
nanoparticles
M Tabatabaee, F Taheri-Behrooz, SM Razavi, GH Liaghat
Journal of Science and Technology of Composites 5 (4), 605-614
|
| 2019 |
Experimental investigation of impact loading on honeycomb sandwich panels
filled with foam
F Hassanpour Roudbeneh, G Liaghat, H Sabouri, H Hadavinia
International Journal of Crashworthiness 24 (2), 199-210
|
| 2019 |
A novel general theory for bending and plastic hinge line phenomena
in indentation and flattening processes
H Saadatfard, A Niknejad, G Liaghat, S Hatami
Thin-Walled Structures 136, 150-161
|
| 2019 |
Numerical and experimental study of impact on hyperelastic rubber panels
A Khodadadi, G Liaghat, H Ahmadi, AR Bahramian, Y Anani, ...
Iranian Polymer Journal 28, 113-122
|
| 2019 |
Thermoelastic stress analysis in composite cylindrical vessel with metallic
liner using first-order shear deformation theory and differential quadrature
method
AA Masumi, GH Rahimi, GH Liaghat
Journal of Thermoplastic Composite Materials 32 (2), 143-177
|
| 2019 |
Experimental Investigation on the Inter-Laminar Strength in a Hybrid
Elastomer Modified Fiber Metal Laminate Under High and Low-Velocity
Impact and Quasi-Static Bending
MAZ Mehrizi, AR Taherzadeh-Fard, G Liaghat, H Ahmadi, Y Anani, ...
Amirkabir J Mech Eng 52 (10), 181-190
|
| 2019 |
Theoretical, numerical and experimental analysis of bimetallic Cu–Al
shaped charge’s liners and its influence on the penetration depth and
the crater diameter of steel targets
H Mehmannavaz, H., Liaghat, G., Rahmati, S., Najafi, M., Fazeli
Journal of the Brazilian Society of Mechanical Sciences and Engineering
41(8 …
|
| 2019 |
Impact Deformation of Curved Nanocomposite Panels
A Bidi, G Liaghat, G Rahimi
Iranian Journal of Science and Technology - Transactions of Mechanical
…
|
| 2019 |
Characterization of compressive behavior of PVC foam infilled composite
sandwich panels with different corrugated core shapes
SA Taghizadeh, A Farrokhabadi, G Liaghat, E Pedram, H Malekinejad,
...
Thin-Walled Structures 135, 160-172
|
| 2019 |
Optimization of manufacturing process of Glass\Polycarbonate thermoplastic
laminates using Taguchi method
CM GHALAMI, G Liaghat, M Sadighi, H Ahmadi
IRANIAN JOURNAL OF MANUFACTURING ENGINEERING 5 (4), 37-43
|
| 2019 |
Experimental study on quasi-static penetration process of cylindrical
indenters with different nose shapes into the hybrid composite panels
SA Taghizadeh, G Liaghat, A Niknejad, E Pedram
Journal of Composite Materials 53 (1), 107-123
|
| 2018 |
Low-velocity impact on cylindrically curved bilayers
A Bidi, G Liaghat, G Rahimi
Proceedings of the Institution of Mechanical Engineers, Part K:
Journal of …
|
| 2018 |
Foam-filled grooved tubes with circular cross section under axial compression:
an experimental study
MM Abedi, A Niknejad, GH Liaghat, M Zamani Nejad
Iranian Journal of Science and Technology, Transactions of Mechanical
…
|
| 2018 |
Eccentric low-velocity impact on fiber-metal laminates under in-plane
loading using unified zigzag theory
M Ghalami-Choobar, G Liaghat, M Sadighi, H Ahmadi
Composite Structures 201, 315-325
|
| 2018 |
The use of the layerwise theory in heat transfer analysis of metal composite
vessel by DQM
AA Masumi, GH Rahimi, GH Liaghat
International Journal of Thermal Sciences 132, 14-25
|
| 2018 |
Copper Cone Shell production Using Electroforming Process and Investigating
Parameters Effect on the Process by the use of Numerical Simulation
H Heydari Pebdani, H Mehman Navaz, G Liaghat, S Rahmati, H Fazeli
Metallurgical Engineering 21 (3), 198-206
|
| 2018 |
Improvement in impact resistance performance of glass/epoxy composite
through carbon nanotubes and silica nanoparticles
Z Naghizadeh, M Faezipour, MH Pol, GH Liaghat, A Abdolkhani
Proceedings of the Institution of Mechanical Engineers, Part L:
Journal of …
|
| 2018 |
Investigation of the impact resistance of the plywood made with adhesive
enhanced with Cellulose Nanofibers
M Sefidrouh, A Khazaian, MH Pol, GH Liaghat, H Yousefi
Iranian Journal of Wood and Paper Industries 9 (2), 263-275
|
| 2018 |
Static analysis of highly anisotropic laminated beam using unified zig-zag
theory subjected to mechanical and thermal loading
M Ghalami-Choobar, G Liaghat, M Sadighi, H Ahmadi, O Razmkhah, ...
International Journal of Mechanical Sciences 141, 491-501
|
| 2018 |
Numerical analysis of energy absorption behavior of quadrangular thin-walled
metal sections under the applied lateral loading by a cylindrical rigid
punch
H Saadatfard, A Niknejad, G Liaghat, S Hatami
Modares Mechanical Engineering 18 (1), 153-164
|
| 2018 |
Experimental and numerical analysis of penetration into Kevlar fabric
impregnated with shear thickening fluid
A Khodadadi, GH Liaghat, AR Sabet, H Hadavinia, A Aboutorabi, ...
Journal of Thermoplastic Composite Materials 31 (3), 392-407
|
| 2018 |
The effect of concrete damage on the penetration depth by the tandem
projectiles
N Dashtian Gerami, GH Liaghat, GH Rahimi, N Khazraiyan
Proceedings of the Institution of Mechanical Engineers, Part C:
Journal of …
|
| 2018 |
Reliability and limitations of Impact-Echo Method for Thickness Measurement
of Orthotropic Composite Plates
M Amiri, M Tabatabaee Ghomi, GH Liaghat
ADMT Journal 11 (1), 71-78
|
| 2018 |
Analysis of low velocity impact on nano-beam using modified couple stress
theory
M Ghalami-Choobar, A Bayat, GH Liaghat, H Ahmadi
Modares Mechanical Engineering 17 (12), 42-46
|
| 2018 |
Simulation of crushing performance of Composite Energy Absorber under
impact loading using Continuum Damage Mechanics approach
M Ebrahimkhani, G Liaghat, H Ahmadi
Modares Mechanical Engineering 17 (12), 505-513
|
| 2018 |
RETRACTED: Investigations on electrophoretic deposition of carbon nanotubes
on glass textures to improve polymeric composites interface
A Haghbin, GH Liaghat, AM Arabi, H Hadavinia, MH Pol
Composites Science and Technology 155, 197-204
|
| 2018 |
Investigation on the debonding between different layers in a hybrid
aluminum/glass-epoxy/rubber laminate under high velocity impact
A Taherzadeh-Fard, MA Zarezadeh, GH Liaghat, H Ahmadi, A Khodadadi
Fabrication and Application (CCFA-6) Iran University of Science
& Technology …
|
| 2018 |
Interaction mechanism of honeycomb sandwich panels under impact loading
F Hassanpour Roudbeneh, G Liaghat, H Sabouri, H Hadavinia, A Liaghat
12th International Conference on Sandwich Structures ICSS-12: Proceedings
…
|
| 2018 |
Experimental characterization of the energy absorption of functionally
graded foam filled tubes under axial crushing loads
S Ebrahimi, N Vahdatazad, G Liaghat
Journal of Theoretical and Applied Mechanics 48 (1), 76
|
| 2017 |
Nickel-based Superalloy Layer Deposited on AISI H13 Hot Tool Steel Base
Metal Using Explosion Cladding process
MR Khanzadeh, H Bakhtiari, SA Akbarimusavi, A Amadeh, G Liaghat
International Journal of Iron & Steel Society of Iran 14 (2), 16-26
|
| 2017 |
Investigation into The Behavior of Nano-composite Tubes at Ballistic
Impact
H Rahimi Sharbaf, GH Rahimi, GH Liaghat
Mechanics of Advanced Composite Structures 4 (3), 207-210
|
| 2017 |
Numerical investigation of dynamic crack growth in steel pipes under
internal detonation loading
G Liaghat
Modares Mechanical Engineering 17 (9), 214-224
|
| 2017 |
Analytical and experimental study of high-velocity impact on ceramic/nanocomposite
targets
H Shanazari, GH Liaghat, S Feli, H Hadavinia
Journal of Composite Materials 51 (27), 3743-3756
|
| 2017 |
Investigation of the high velocity impact behavior of grid cylindrical
composite structures
M Hedayatian, GH Liaghat, G Rahimi, MH Pol, H Hadavinia, R Zamani
Polymer composites 38 (11), 2603-2608
|
| 2017 |
Experimental investigation of amount of nano-Al2O3
on mechanical properties of Al-based nano-composites fabricated by powder
metallurgy (PM)
A Razzaqi, G Liaghat, O Razmkhah
AIP Conference Proceedings 1896 (1), 200006
|
| 2017 |
Enhancement of the electrical conductivity and interlaminar shear strength
of CNT/GFRP hierarchical composite using an electrophoretic deposition
technique
A Haghbin, G Liaghat, H Hadavinia, AM Arabi, MH Pol
Materials 10 (10), 1120
|
| 2017 |
The use of the differential quadrature method in the analysis of composite
metal cylindrical vessel under dynamical load
AA Masoumi, GH Rahimi, GH Liaghat
Modares Mechanical Engineering 17 (6), 319-330
|
| 2017 |
Analysis of liner effect on shaped charge penetration into thick concrete
targets
ND Gerami, GH Liaghat, GHRS Moghadas, N Khazraiyan
Journal of the Brazilian Society of Mechanical Sciences and Engineering
39 …
|
| 2017 |
Improving the fracture toughness properties of epoxy using graphene
nanoplatelets at low filler content
N Domun, H Hadavinia, T Zhang, G Liaghat, S Vahid, C Spacie, KR
Paton, ...
Nanocomposites 3 (3), 85-96
|
| 2017 |
Experimental studies of stiffness degradation and dissipated energy
in glass fibre reinforced polymer composite under fatigue loading
MO Cadavid, O Al-Khudairi, H Hadavinia, D Goodwin, GH Liaghat
Polymers and Polymer Composites 25 (6), 435-446
|
| 2017 |
Static analysis of transversely anisotropic laminates using improved
zig-zag theory subjected to sinusoidal load
M Ghalami Choobar, GH Lighat, M Sedighi, H Ahmadi
Modares Mechanical Engineering 17 (4), 393-398
|
| 2017 |
Effect of nano-particles on the tensile, flexural and perforation properties
of the glass/epoxy composites
A Afrouzian, H Movahhedi Aleni, GH Liaghat, H Ahmadi
Journal of reinforced plastics and composites 36 (12), 900-916
|
| 2017 |
Oblique crashworthiness optimization and sensitivity analysis of tapered
sandwich columns
N Vahdatazad, S Ebrahimi, G Liaghat
Journal of Science and Technology of Composites 4 (1), 25-34
|
| 2017 |
Crashworthiness efficiency optimisation for two-directional functionally
graded foam-filled tubes under axial crushing impacts
S Ebrahimi, N Vahdatazad, G Liaghat
International Journal of Crashworthiness 22 (3), 307-321
|
| 2017 |
Analytical investigation of high-velocity impact on hybrid unidirectional/woven
composite panels
H Shanazari, GH Liaghat, H Hadavinia, A Aboutorabi
Journal of Thermoplastic Composite Materials 30 (4), 545-563
|
| 2017 |
Experimental study of behavior of filament winding composite pipes with
liner using glass fibers and silica nanoparticles under impact loading
H Rahimi Sharbaf, GH Rahimi, GH Liaghat
Journal of Science and Technology of Composites 3 (4), 311-320
|
| 2017 |
Improving shear strength in nanocomposites through electrophoretic deposition
of carbon nanotubes
A Haghbin, G Liaghat, A Arabi, M Pol
Modares Mechanical Engineering 17 (1), 462-472
|
| 2017 |
Experimental investigation of foam filled sandwich panels in concentrated
and distributed compressive loading
F Hassanpour Roudbeneh, GH Lighat, H Sabouri
Modares Mechanical Engineering 16 (12), 648-656
|
| 2017 |
Analysis of penetration process in hybrid ceramic/nanocomposite targets
H Shanazari, GH Lighat, S Feli
Modares Mechanical Engineering 16 (10), 137-146
|
| 2017 |
Investigation of performance of anti structure tandem projectiles in
to the concrete targets by numerical and experimental method
N Dashtin Gerami, GH Liaghat, GH Rahimi, N Khazraiyan
Modares Mechanical Engineering 16 (10), 9-18
|
| 2017 |
Non-destructive Evaluation of Glass-Epoxy Composite using Impact-Echo
Method
M Amiri, GM TABATABAEE, G Liaghat
INTERNATIONAL JOURNAL OF ADVANCED DESIGN AND MANUFACTURING TECHNOLOGY
10 (1 …
|
| 2017 |
Studies on the mechanical properties of composites reinforced with nanoparticles
MH Pol, GH Liaghat
Polymer Composites 38 (1), 205-212
|
| 2017 |
EXPERIMENTAL ANALYSIS OF BALLISTIC LIMIT VELOCITY OF AUTOCLAVED AERATED
CONCRETE TARGETS UNDER RIGID PROJECTILE PENETRATION
A BAYAT, GH LIAGHAT, H SABOURI, E PEDRAM, MSA FARSAVANI
JOURNAL OF ENERGETIC MATERIALS 11 (432), 3-11
|
| 2016 |
Experimental and numerical analysis of impact on curved steel-polyurea
bi-layer panels
A Bidi, G Liaghat, G Rahimi
Journal of Science and Technology of Composites 3 (3), 207-214
|
| 2016 |
Experimental investigation on the energy absorption and contact force
of unstiffened and grid-stiffened composite cylindrical shells under
lateral compression
M Moeinifard, G Liaghat, G Rahimi, A Talezadehlari, H Hadavinia
Composite Structures 152, 626-636
|
| 2016 |
Investigation of interaction between aluminum facing and honeycomb structure
in quasi-static and impact loading
F Hassanpour Roudbeneh, GH Liaghat, H Sabouri, H Hadavinia
Modares Mechanical Engineering 16 (7), 23-31
|
| 2016 |
Effect of nano clay addition to energy absorption capacity of steel-polyurea
bi-layer
A Bidi, G Liaghat, G Rahimi
Journal of Science and Technology of Composites 3 (2), 157-164
|
| 2016 |
Foam-filled grooved tubes with circular cross-section under axial compression:
a theoretical analysis
A Niknejad, MM Abedi, GH Liaghat, M Zamani Nejad
Iranian Journal of Science and Technology, Transactions of Mechanical
…
|
| 2016 |
Experimental and numeral analysis of composite metal vessel under dynamic
loading
AA Masumi, GH Rahimi, GH Liyaghat
Modares Mechanical Engineering 16 (5), 51-62
|
| 2016 |
Experimental and numerical analysis of impact on steel curved panels
A Bidi, GH Liaghat, CH Rahimi
Modares Mechanical Engineering 16 (4), 281-288
|
| 2016 |
Investigation of the high velocity impact behavior of nanocomposites
MH Pol, G Liaghat
Polymer Composites 37 (4), 1173-1179
|
| 2016 |
Laminate composites behavior under quasi-static and high velocity perforation
EM Yeganeh, GH Liaghat, MH Pol
Steel and Composite Structures 22 (4), 777-796
|
| 2016 |
Investigation on tensile properties of plain and nanoclay reinforced
syntactic foams
H Ahmadi, GH Liaghat, H Hadavinia
International Journal of Composite Materials 6 (1), 34-41
|
| 2015 |
Analytical and numerical investigation of projectile perforation into
ceramic-metal targets and presenting a modified theory
M Tahmaseiabdar, GH Liaghat, H Shanazari, A Khodadadi, H Hadavinia,
...
Modares Mechanical Engineering 15 (9), 353-359
|
| 2015 |
Revisiting the wrinkling limits in flexible roll forming
MM Kasaei, HM Naeini, GH Liaghat, CMA Silva, MB Silva, PAF Martins
The Journal of Strain Analysis for Engineering Design 50 (7), 528-541
|
| 2015 |
Axial splitting of empty and foam-filled circular composite tubes—An
experimental study
B Rezaei, A Niknejad, H Assaee, GH Liaghat
Archives of Civil and Mechanical Engineering 15 (3), 650-662
|
| 2015 |
Absorbed energy by foam-filled quadrangle tubes during the crushing
process by considering the interaction effects
A Niknejad, MM Abedi, GH Liaghat, MZ Nejad
Archives of civil and mechanical engineering 15 (2), 376-391
|
| 2015 |
Quasi-static and dynamic compressive properties of ceramic microballoon
filled syntactic foam
H Ahmadi, GH Liaghat, MM Shokrieh, H Hadavinia, A Ordys, A Aboutorabi
Journal of composite materials 49 (10), 1255-1266
|
| 2015 |
An experimental investigation on mode-II interlaminar fracture toughness
of nanosilica modified glass/epoxy fiber-reinforced laminates.
HM Aleni, GH Liaghat, MH Pol, A Afrouzian
Modares Mechanical Engineering 15 (3)
|
| 2015 |
Investigation of the ballistic impact behavior of 2D woven glass/epoxy/nanoclay
nanocomposites
MH Pol, G Liaghat, E Zamani, A Ordys
Journal of Composite Materials 49 (12), 1449-1460
|
| 2015 |
Experimental investigation of quasi-static perforation on laminated
glass epoxy composites by indenters with different geometries.
EM Yeganeh, GH Liaghat, MH Pol
Modares Mechanical Engineering 15 (1)
|
| 2015 |
Investigation of energy absorption and deformation of thin walled tubes
with circle and square section geometries under transverse impact loading.
M Choubini, GH Liaghat, MH Pol
Modares Mechanical Engineering 15 (1)
|
| 2015 |
Experimental investigation of nanoclay and nanosilica particles effects
on mechanical properties of glass epoxy composites.
MH Pol, GHH Liaghat, EM Yeganeh, A Afrouzian
Modares Mechanical Engineering 14 (16)
|
| 2015 |
Prediction of Bursting in Warm Tube Hydroforming using Modified Ductile
Fracture Criteria.
SJ Hashemi, HM Naeini, G Liaghat, JS Karami, AH Roohi
Modares Mechanical Engineering 14 (16)
|
| 2015 |
Experimental investigation of cylindrical projectiles nose shape effects
on high velocity perforation of woven polymer composite.
EM Yeganeh, GHH Liaghat, MH Pol
Modares Mechanical Engineering 14 (14)
|
| 2015 |
Prediction of bulge height in warm hydroforming of aluminum tubes using
ductile fracture criteria
SJ Hashemi, HM Naeini, GH Liaghat, RA Tafti
Archives of Civil and Mechanical Engineering 15 (1), 19-29
|
| 2015 |
Experimental study on the effect of nano-silica composite interlaminar
fracture toughness third of materials reinforced with glass fibers
AH Mohedi, G Liaghat, MH Pol, A Afrosian
Persian. Modares Mechanical Engineering 15 (3), 290-283
|
| 2015 |
Forming Limit Curve at Neck and Forming Limit Curve at Fracture in Hydroforming
of Aluminum Tubes
SJ Hashemi, NH MOSLEMI, GH Liaghat, AH DEILAMI
AEROSPACE MECHANICS JOURNAL 11 (139), 1-10
|
| 2015 |
Streaming algorithms for estimating the matching size in planar graphs
and beyond
O Esfandiari, Hajiaghayi, Liaghat, Monemizadeh
ACM Transactions on Algorithms 14 (4), 48
|
| 2015 |
Improving the fracture toughness and the strength of epoxy using nanomaterials–a
review of the current status
N Domun, H Hadavinia, T Zhang, T Sainsbury, GH Liaghat, S Vahid
Nanoscale 7 (23), 10294-10329
|
| 2015 |
Explicit finite element modeling of impact loading on nanobeam to compare
with Euler–Bernoulli and Timoshenko theory
S Seifoori, A Alibiglo, GH Liaghat, MH Pol
Modares Mechanical Engineering 14 (13)
|
| 2014 |
Numerical and experimental analyses of projectile penetration in grid
cylindrical composite structures under high velocity Impact
G Lighat, MH Pol
Modares Mechanical Engineering 14 (9), 17-26
|
| 2014 |
Modeling and analytical study of progressive collapse of aluminum foam
E Zamani, G Liaghat, MH Pol
Modares Mechanical Engineering 14 (9), 99-106
|
| 2014 |
Forming limit diagram of aluminum AA6063 tubes at high temperatures
by bulge tests
SJ Hashemi, HM Naeini, G Liaghat, RA Tafti, F Rahmani
Journal of Mechanical Science and Technology 28, 4745-4752
|
| 2014 |
Effects of nanoclay on the ballistic behavior of GLARE-Experimental
and numerical investigation
A Masoudi, G Lighat, MH Pol
Modares Mechanical Engineering 14 (7), 43-51
|
| 2014 |
Analytical, experimental and numerical investigation of sandwich panels
made of honeycomb core subjected projectile impact
N Pirmohammad, GH Liaghat, MH Pol, H Sabouri
Modares Mechanical Engineering 14 (6), 153-164
|
| 2014 |
Pitch effect on flexural behavior of sandwich structure with composite
skins and a corrugated combinatorial core with trapezoidal geometry
R Rahmani, G Rahimi
Modares Mechanical Engineering 14 (5), 194-202
|
| 2014 |
Compressive properties of nanoclay-reinforced syntactic foams at quasi-static
and high strain rate loading
H Ahmadi, GH Liaghat, MM Shokrieh, A Aboutorabi, H Hadavinia, A
Ordys
Polymer-Plastics Technology and Engineering 53 (10), 990-999
|
| 2014 |
Experimental investigation on ballistic behavior of sandwich panels
made of honeycomb core
N Pirmohammad, GH Liaght, MH Pol
Modares Mechanical Engineering 14 (4), 21-26
|
| 2014 |
Experimental investigation of effects of nanoclay on ballistic properties
of GLARE
GH Lighat, MH Pol
Modares Mechanical Engineering 14 (4), 141-146
|
| 2014 |
Experimental study on Dynamic Response of grid cylindrical composite
structures under high velocity Impact
M Hedayatian, GH Liaghat, GH Rahimi, MH Pol, M Khoshsoroor
Modares Mechanical Engineering 14 (2), 41-46
|
| 2014 |
Experimental investigation of fabrication parameterseffects on the mechanical
properties of epoxy/ceramic microballoon syntactic foams
H Ahmadi, MM Shokrieh
Modares Mechanical Engineering 14 (2), 47-54
|
| 2014 |
Analytical prediction of limit strains and limit stresses in hydroforming
of anisotropic aluminum tubes
H Moslemi Naeini, J Hashemi, G Liaghat, M Mohammadi, ...
Modares Mechanical Engineering 14 (2), 133-140
|
| 2014 |
Experimental Investigation on the Ballistic Impact of 2/1 GLARE Panels
H Sabouri, G Liaghat, H Ahmadi, M Sadighi
Iranian Scientific Association of Energetic Materials 8 (4), 47-54
|
| 2014 |
Experimental Analysis of Penetration into Targets Made of Kevlar Laminate
with STF Fluids
A Khodadadi, GHH LIAGHAT, MA Akbari
AEROSPACE MECHANICS JOURNAL 9 (434), 85-94
|
| 2014 |
Numerical and experimental analysis of penetration into Kevlar fabrics
and investigation of the effective factors on the ballistic performance
A Khodadadi, GHH LIAGHAT, MA Akbari, M Tahmasebi
MODARES MECHANICAL ENGINEERING 13 (12), 124-133
|
| 2014 |
Prediction of forming limit curve using ductile fracture criteria in
hydrofoming of aluminum tubes
SJ Hashemi, NH MOSLEMI, GH Liaghat, AH DEILAMI, A NEMATIFAGHIR
JOURNAL OF APPLIED AND COMPUTATIONAL SCIENCES IN MECHANICS (JOURNAL
OF …
|
| 2014 |
Flange wrinkling in flexible roll forming process
MM Kasaei, HM Naeini, B Abbaszadeh, M Mohammadi, M Ghodsi, ...
Procedia Engineering 81, 245-250
|
| 2013 |
Empty circular metal tubes in the splitting process–theoretical and
experimental studies
A Niknejad, B Rezaei, GH Liaghat
Thin-walled structures 72, 48-60
|
| 2013 |
Closed-form model for the analysis of W-type shaped charges
A Mahdian, M Ghayour, GH Liaghat
Journal of Applied Mechanics and Technical Physics 54, 713-719
|
| 2013 |
Analysis of perforation process into concrete/metal targets by rigid
projectiles
N Khazraiyan, GH Liaghat, H Khodarahmi, N Dashtian-Gerami
Proceedings of the Institution of Mechanical Engineers, Part C:
Journal of …
|
| 2013 |
Investigation on the high velocity impact properties of glass-reinforced
fiber metal laminates
H Ahmadi, GH Liaghat, H Sabouri, E Bidkhouri
Journal of Composite Materials 47 (13), 1605-1615
|
| 2013 |
Effect of nanoclay on ballistic behavior of woven fabric composites:
Experimental investigation
MH Pol, GH Liaghat, F Hajiarazi
Journal of Composite Materials 47 (13), 1563-1573
|
| 2013 |
Normal impact of hard projectiles on concrete targets
N Khazraiyan, GH Liaghat, H Khodarahmi
Structural Concrete 14 (2), 176-183
|
| 2013 |
Generalized closed-form model for analysis of asymmetric shaped charges
A Mahdian, GH Liaghat, M Ghayour
Journal of Applied Mechanics and Technical Physics 54, 259-267
|
| 2013 |
EFFECTS OF NANO-PARTICLES CONCENTRATION ON DYNAMIC RESPONSE OFLAMINATED
NANOCOMPOSITE BEAM
MH Pol, A Zabihollah, S Zareie, G Liaghat
Mechanics 19 (1), 53-57
|
| 2013 |
Numerical and experimental study on the effects of expansion ratio,
corner fillets and strain rate in warm hydroforming of aluminum tubes
SMH Seyedkashi, YH Moon
Modares Mechanical Engineering 12 (5), 122-131
|
| 2013 |
Experimental and Numerical investigation of energy absorption and deformation
of thin-walled tube with various geometry cross-section under lateral
Impact loading
M Chobini, GH Liaghat
Tarbiat Modares University
|
| 2013 |
STUDY OF THE EFFECTS OF WORK HARDENING MODELS BACK IN COLD ROLL FORMING
OF U-CHANNELS
RV PANAHIZADEH, NH MOSLEMI, GHH LIAGHAT, TM SALMANI
MODARES MECHANICAL ENGINEERING 13 (6), 82
|
| 2013 |
Low velocity impact of a nanoparticle on Euler-Bernoulli nanobeam using
a nonlocal elasticity model
S Seifoori, GHH LIAGHAT
MODARES MECHANICAL ENGINEERING 13 (3), 37-44
|
| 2013 |
THE EFFECT OF THE PROJECTILE DEFORMATION ON TUMBLING PERFORATION
T AKBARI, GHH LIAGHAT, S FELI
JOURNAL OF ENERGETIC MATERIALS 7 (417), 23-32
|
| 2013 |
The online stochastic generalized assignment problem
VL S Alaei, MT Hajiaghayi
Springer, Berlin, Heidelberg
|
| 2013 |
Effect of nanoclay particles on ballistic behavior of composites-theoretical
and experimental investigation
MH Pol, GH Liaghat, E Zamani
MODARES MECHANICAL ENGINEERING 13 (6), 30-42
|
| 2013 |
Low velocity impact on Timoshenko nanobeam using a nonlocal elasticity
theory
S Seifoori, GH Liaghat, M Foladi
MODARES MECHANICAL ENGINEERING 13 (8), 151-160
|
| 2013 |
A modified analytical model for analysis of perforation of projectile
into ceramic composite targets
GH Liaghat, H Shanazari, M Tahmasebi, A Aboutorabi, H Hadavinia
International Journal of Composite Materials 3 (6B), 17-22
|
| 2013 |
Numerical and experimental investigation of temperature effect on thickness
distribution in warm hydroforming of aluminium
SJ Hashemi, H Moslemi Naeini, GH Liaghat, R Azizi Tafti, F Rahmani
Journal of Materials Engineering and Performance 22 (1), 57-63
|
| 2013 |
Low velocity impact of a nanoparticle on nanobeams by using a nonlocal
elasticity model and explicit finite element modeling
S Seifoori, GH Liaghat
International Journal of Mechanical Sciences 69 (6), 85-93
|
| 2013 |
Experimental and theoretical investigation of thickness ratio effect
on the formability of tailor welded blank
R Safdarian Korouyeh, H Moslemi Naeini, MJ Torkamani, GH Liaghat
Optics and Laser Technology 51 (5), 24-31
|
| 2012 |
Experimental analysis and simulation of effective factors on explosive
forming of spherical vessel using prefabricated four cones vessel structures
H Mehrasa, G Liaghat, D Javabvar
Open Engineering 2 (4), 656-664
|
| 2012 |
Theoretical and experimental study on empty and foam-filled columns
with square and rectangular cross section under axial compression
MM Abedi, A Niknejad, GH Liaghat, MZ Nejad
International Journal of Mechanical Sciences 65 (1), 134-146
|
| 2012 |
Experimental and numerical investigation of an adaptive simulated annealing
technique in optimization of warm tube hydroforming
SMH Seyedkashi, H Moslemi Naeini, G Liaghat, M Mosavi Mashadi, ...
Proceedings of the Institution of Mechanical Engineers, Part B:
Journal of …
|
| 2012 |
Correlation between numerical finite element simulation and experiments
for explosive cladding of nickel base super alloy on hot tool steel
MR Khanzadeh, SAA Akbari Mousavi, A Amadeh, GH Liaghat
Strain 48 (4), 342-355
|
| 2012 |
The effect of tube dimensions on optimized pressure and force loading
paths in tube hydroforming process
H Seyedkashi, HM Naeini, GH Liaghat, MM Mashadi, M Mirzaali, ...
Journal of mechanical science and technology 26 (6), 1817
|
| 2012 |
Prediction of the mean folding force during the axial compression in
foam-filled grooved tubes by theoretical analysis
A Niknejad, MM Abedi, GH Liaghat, MZ Nejad
Materials & Design 37, 144-151
|
| 2012 |
Effect of Explosive Ratio and Standoff Distance Parameters on Explosive
Cladding of AISI H13 Hot Tool Steel with Inconel 718 Super Alloy
MR Khanzadeh, AAM Akbari, AA Amadeh, G Liaghat
Majlesi Journal of Materials Engineering 5 (3)
|
| 2012 |
Experimental investigation on the lateral compression in the foam-filled
circular tubes
A Niknejad, SA Elahi, GH Liaghat
Materials & Design (1980-2015) 36, 24-34
|
| 2012 |
List Of Journal Paper (s)
A RAMEZANI, SAR REZAEI, M ZAREINEJAD, K BAGHESTAN, ...
JOURNAL OF BABOL UNIVERSITY OF MEDICAL SCIENCES 14 (2), 65
|
| 2012 |
Study of the effect of project management on manufacturing and production
projects
SB Ahmadi, Z Moradpour, G Liaghat
International Journal of Industrial and Manufacturing Engineering
6 (2), 470-477
|
| 2012 |
INVESTIGATION OF EXPLOSIVE WELDING OF INCONEL 718 SUPER ALLOY TO AISI
H13 HOT TOOL STEEL
MR KHANZADEH, MSAA AKBARI, A AMADEH, GHH LIAGHAT
JOURNAL OF ENERGETIC MATERIALS 7 (215), 3-15
|
| 2012 |
Experimental investigation of effect of nanoclay on ballistic properties
of composites
MH Pol, GH Liaght, F Hajiarazi
Modares Mechanical Engineering 12 (1), 11-20
|
| 2012 |
Analytical and numerical studies of high-velocity plate impact crushing
of aluminum foam
E Zamani, GH Liaghat, HR Shahverdi
JOURNAL OF ENERGETIC MATERIALS 7 (114), 55-62
|
| 2012 |
Forming limit diagram prediction of tailor-welded blank using experimental
and numerical methods
RS Korouyeh, HM Naeini, GH Liaghat
Journal of Materials Engineering and Performance 21 (10), 2053-2061
|
| 2012 |
Application of simulated annealing method to pressure and force loading
optimization in tube hydroforming process
M Mirzaali, SMH Seyedkashi, GH Liaghat, H Moslemi Naeini, GK Shojaee,
...
International Journal of Mechanical Science 55 (1), 78-84
|
| 2012 |
Explosive welding of stainless steel-carbon steel coaxial pipes
E Zamani, G Liaghat
Journal of Material Science 47 (2), 685-695
|
| 2012 |
Investigation of weld line movement in tailor welded blank forming
RS Korouyeh, HM Naeini, GH Liaghat, MM Kasaei
Advanced Materials Research 445, 39-44
|
| 2012 |
A Simple Analytical Model to Simulate Oblique Ballistic Impact onto
Fabric
MA Akbari, GH Liaghat, H Sabouri
Applied Mechanics and Materials 110, 3453-3458
|
| 2012 |
Experimental investigation of the rubber-filled tubes in the tube inversion
process
A Niknejad, GH Liaghat, M Moeinifard
Advanced Materials Research 445, 33-38
|
| 2012 |
Explosive welding of unequal surface using groove method
MT Ghomi, J Mahmoudi, A Khalkhali, G Liaghat
Transactions of the Canadian Society for Mechanical Engineering
36 (2), 113-125
|
| 2011 |
Ballistic Impact Perforation into GLARE Targets: Experiment, Numerical
Modelling and Investigation of Aluminium Stacking Sequence.
H Sabouri, H Ahmadi, GH Liaghata
International Journal of Vehicle Structures & Systems (IJVSS) 3
(3)
|
| 2011 |
Numerical Analysis and Presentation of a Combined Structural Model for
the Concrete Affected by a Relatively High Strain Rate Loading
GH Liaghat, MT Ahmadi, P Pirali
Iranian Scientific Association of Energetic Materials 5 (2), 43-57
|
| 2011 |
Comparison of the Folding Behaviour in the Empty and Foam‐Filled Honeycombs
via Drop Hammer Tests
A Niknejad, GH Liaghat, HM Naeini, AH Behravesh
AIP Conference Proceedings 1315 (1), 15-20
|
| 2011 |
Investigation of Aluminum‐Copper Tube Hydroforming with Axial Feeding
M Parto D, SMH Seyedkashi, G Liaghat, HM Naeini, V Panahizadeh R
AIP Conference Proceedings 1315 (1), 475-480
|
| 2011 |
The behavior of GFRP-stiffened and-unstiffened shells under cyclic axial
loading and unloading
GHR M Yazdani
Journal of Reinforced Plastics and Composites 5 (30), 440-445
|
| 2011 |
Ballistic Impact Perforation into GLARE Targets: Experiment, Numerical
Modelling and Investigation of Aluminium Stacking Sequence. GHL H Sabouri,
H Ahmadi International Journal …
H Ahmadi, H Sabouri, G Liaghat
International journal of Vehicle Structure and systems 3 (3), 178-183
|
| 2011 |
Ballistic Impact Perforation into GLARE Targets: Experiment, Numerical
Modelling and Investigation of Aluminium Stacking Sequence. GHL H Sabouri,
H Ahmadi International Journal …
H Ahmadi, H Sabouri, G Liaghat
International journal of Vehicle Structure and systems 3 (3), 178-183
|
| 2011 |
Ballistic Impact Perforation into GLARE Targets: Experiment, Numerical
Modelling and Investigation of Aluminium Stacking Sequence. GHL H Sabouri,
H Ahmadi International Journal …
H Ahmadi, H Sabouri, G Liaghat
International journal of Vehicle Structure and systems 3 (3), 178-183
|
| 2011 |
Engineers, Part C: Journal of Mechanical
S Seifoori, GH Liaghat
Proceedings of the Institution of Mechanical Engineers, Part C:
Journal of …
|
| 2011 |
ANALYSIS OF OBLIQUE PENETRATION PROCESS OF BLUNT DEFORMABLE PROJECTILE
INTO MULTILAYER METALLIC TARGETS
D Radmehr, GH LIAGHAT, S Feli
JOURNAL OF ENERGETIC MATERIALS 6 (111), 21-31
|
| 2011 |
Experimental study of Poly-orthan foam filler on hexagonal honeycomb
structure behavior under axial load with constant rate
A Niknejad, G Liaghat
10th Iran Aerospace conference (AERO2011)
|
| 2011 |
Answer to the letter to the editor by N. Cristescu “Comments on a model
for ballistic impact on multi-layer fabric targets by M. Mamivand and
GH Liaghat”
M Mamivand, GH Liaghat
International Journal of Impact Engineering 5 (38), 418
|
| 2011 |
A semianalytical and numerical study of penetration and perforation
of an ogive nose projectile into concrete targets under normal impact
S Seifori, GH Liaghat
Journal of Mechanical Science 225 (8), 1782-1797
|
| 2011 |
Optimization of tube hydroforming process using simulated annealing
algorithm
M Mirzaali, GH Liaghat, HM Naeini, SMH Seyedkashi, K Shojaee
Procedia Engineering 10 (10), 3012-3019
|
| 2011 |
Theoretical and experimental studies of the instantaneous folding force
of the polyurethane foam-filled square honeycombs
A Niknejad, G Liaghat, H Moslemi Naeini, AH Behravesh
Material and Design 32 (1), 69-75
|
| 2011 |
Numerical and experimental study of two-layered tube forming by hydroforming
process
SMH Seyedkashi, GH Liaghat, HM Naeini, SM Mahdavian, ...
Advanced Materials Research 264, 102-107
|
| 2011 |
Fe simulation and experimental study of tube hydroforming process for
aa1050 alloy at various temperatures
HM Naeini, GH Liaghat, SJ Hashemi Ghiri, SMH Seyedkashi
Advanced Materials Research 264, 96-101
|
| 2011 |
MODELLING AND SIMULATION OF ELASTIC & PLASTIC BEHAVIOUR OF PROPAGATING
IMPACT WAVE: Impact-echo and Explosive welding process development
M Tabatabaee Ghomi
Mälardalen University
|
| 2011 |
Removing leakage from oil and gas low pressure pipes by explosive welding
method
M Tabatabaee Ghomi, J Mahmoudi, G Liaghat
Journal of Petroleum and Gas Exploration Research 1 (1), 34-42
|
| 2011 |
Experimental and numerical investigation on the high velocity impact
response of GLARE with different thickness ratio
H Ahmadi, H Sabouri, G Liaghat, E Bidkhori
Procedia Engineering 10, 869-874
|
| 2010 |
Viscoplasticity coupled with nonlocalized damage for incompatibilities
due to strain softening
P Pirali, GH Liaghat, MT Ahmadi
Mechanics 86 (6), 17-23
|
| 2010 |
Theoretical Calculation of the Instantaneous Folding Force in a Single-Cell
Square Column under Axial Loading
A Niknejad, GH Liaghat, H Moslemi Naeini, AH Behravesh
Modares Mechanical Engineering 10 (3), 21-30
|
| 2010 |
Manufacturing of bimetal tubes made of st-37 and phosphor-bronze using
explosive welding
A Dehghan Manshadi
Modares Mechanical Engineering 10 (2), 1-17
|
| 2010 |
Deformation of Blunt Projectiles during Penetration into Deformable
Medium Metallic Targets
Z Abbasi, GH Liaghat, S Feli
Amirkabir Journal of Mechanical Engineering 42 (1), 77-87
|
| 2010 |
SANDWICH DESIGN OPTIMIZATION HONEYCOMB PANELS UNDER COMPRESSOR LOAD
GH LIAGHAT, H SORAILO
MODARES TECHNICAL AND ENGINEERING
|
| 2010 |
Comments on the article
H Sabouri, GH Liaghat
COMPOSITE STRUCTURES-BARKING- 92 (2), 600-601
|
| 2010 |
Experimental and Numerical Study on the Effects of Frame Shapes and
Stacking Sequence of Composite Plates Subjected to High-Velocity Impact
HR Raissi, GH Liaghat, H Raissi
MSc thesis, Tarbiat Modares University, Tehran, Iran
|
| 2010 |
Theoretical and experimental study of the effects of process parameters
on bending angle in laser bending process
MH Gollo, SM Mahdavian, HM Naeini, GH Liaghat, S Jelvani
Modares Mechanical Engineering 10 (3), 67-86
|
| 2010 |
Experimental and Numerical Investigation of Perforation Behavior of
Composite Laminates Reinforced with Carbon Nanotubes
M Khoshgoftar, G Liaghat
Tarbiat Modares University, Mechanical Engineering Department
|
| 2010 |
A numerical and experimental study of sheet metal bending by pulsed
ND: YAG laser with doe method
M Hosseinpour Gollo, HM Naeini, GH Liaghat, S Jelvani, MJ Torkamany
Advanced Materials Research 83, 1076-1083
|
| 2010 |
Investigation of the folding angle variations during the folding progress
in the columns
A Niknejad, GH Liaghat, H Moslemi Naeini, AH Behravesh
Trends in Applied Sciences Research 5 (1), 56-63
|
| 2010 |
Analytical solution for penetration of deformable blunt projectiles
into the metallic targets
D Radmer, GH Liaghat, S Felli, D Naderi
Mechanika 2 (82), 5-13
|
| 2010 |
Comments on the article:“Ballistic impact of GLARE™ fiber–metal laminates”,
by Michelle S. Hoo Fatt, Chunfu Lin, Duane M. Revilock Jr., Dale A.
Hopkins [Composite Structures …
H Sabouri, GH Liaghat
Composite Structures 92 (2), 600-601
|
| 2010 |
A theoretical formula for predicting the instantaneous folding force
of the first fold in a single cell hexagonal honeycombunder axial loading
A Niknejad, G Liaghat, H Moslemi Naeini, AH Behravesh
proceeding of the Institution of Mechanical Engineers, Part C:Journal
of …
|
| 2010 |
Experimental and theoretical investigation of the first fold creation
in thin walled columns
A Niknejad, G Liaghat, HM Naeini, AH Behravesh
Acta Mechanica Solida Sinica 23 (4), 353-360
|
| 2010 |
A model for ballistic impact on multi-layer fabric targets
M Mamivand, G Liaghat
International Journal of Impact Engineering 37 (7), 806-812
|
| 2010 |
Study of Forming Parameters in Hydroforming of a Thin-Walled ASTM C11000
Copper Tube
SMH Seyedkashi, GH Liaghat, HM Naeini, M Hoseinpour Gollo
Advanced Materials Research 83, 133-142
|
| 2010 |
Optimum design of honeycomb core under compression load
G Liaghat, H Sarailou
Technical and Engineering Journal of Modarres 37, 73-81
|
| 2010 |
NUMERICAL STUDY OF THICKNESS DISTRIBUTION IN WARM ALUMINIUM TUBE HYDROFORMING
PROCESS
NH MOSLEMI, G LIAGHAT, GSJ HASHEMI, KSMH SEYED, F RAHMANI
JOURNAL OF MODERN PROCESSES IN MANUFACTURING AND PRODUCTION (JOURNAL
OF …
|
| 2010 |
Ballistic limit evaluation for impact of cylindrical projectiles on
honeycomb panels
GH Liaghat, AA Nia, HR Daghyani, M Sadighi
Thin-Walled Structures 48 (1), 55-61
|
| 2009 |
Sandwich design optimization honeycomb panels under compressor load
G Liaghat, H Sorailo
Modares Mechanical Engineering 9 (1), 73-82
|
| 2009 |
Experimental investigation of the maximum axial force in the folding
process of aluminum square columns
A Niknejad, GH Liaghat, AH Behravesh, H Moslemi Naeini
International conference on manufacturing systems engineering, Rome,
Italy
|
| 2009 |
Analysis of normal penetration of ogive-nose projectiles into thin metallic
plates
MH Pol, A Bidi, AV Hoseini, GH Liaghat
World Academy of Science, Engineering and Technology 38, 239-242
|
| 2009 |
EXPERIMENTAL ANALYSIS OF HONEYCOMB STRUCTURES UNDER BLAST LOADING
J ZAMANI, GHH LIAGHAT, M HESHMATI, MM BAGHERI
JOURNAL OF ENERGETIC MATERIALS 3 (2), 41-49
|
| 2009 |
Development of a contact model for analyzing a 2-d elastic-plastic reshaping
process of pipes
NH MOSLEMI, GHH LIAGHAT, TM SALMANI, S MAZDAK, ...
AEROSPACE MECHANICS JOURNAL 5 (216), 51-63
|
| 2009 |
ANALYSIS OF PENETRATION PROCESS OF BLUNT DEFORMABLE PROJECTILES INTO
METALLIC TARGETS
D Radmehr, GHH LIAGHAT, S FELI, MM ZAHIR
AEROSPACE MECHANICS JOURNAL 4 (414), 41-54
|
| 2009 |
Core optimal design in honeycomb structures under compression loading
GH Liaghat, H Serailou
Modares Mechanical Engineering 9 (37), 73-82
|
| 2009 |
Experimental investigation of sheet metal formability under various
strain rates
BM Dariani, G Liaghat, M Gerdooei
Proceedings of the Institution of Mechanical Engineers, Part B:
Journal of …
|
| 2008 |
Theoretical investigation of the instantaneous folding force during
the first fold creation in a square column
A Niknejad, GH Liaghat, AH Behravesh, HM Naeini
International conference on applied mechanics and mechanical engineering
…
|
| 2008 |
Analysis of rupture instability in the hydromechanical deep drawing
of cylindrical cups
HD Azodi, H Moslemi Naeini, MH Parsa, GH Liaghat
The International Journal of Advanced Manufacturing Technology 39,
734-743
|
| 2008 |
The oblique penetration and perforation of a rigid projectile into a
thick metallic target: Analytical model
AHM Mohammadi, GH Liaghat, H Khodarahmi
International Journal of Modern Physics B 22 (09n11), 1297-1304
|
| 2008 |
ANALYSIS OF OBLIQUE PENETRATION OF ANTI-RICOCHET TEETH OF CONICAL PROJECTILES
INTO THIN METALLIC TARGETS
MH POL, S HOSSEINI, GHH LIAGHAT
JOURNAL OF ENERGETIC MATERIALS 3 (1), 49-56
|
| 2008 |
ANALYSIS OF DIE LESS EXPLOSIVE FORMING OF BIMETALLIC CIRCULAR PLATES
USING
GHH LIAGHAT, AS ZARGAR
JOURNAL OF FACULTY OF ENGINEERING (UNIVERSITY OF TEHRAN) 42 (1111),
97-106
|
| 2008 |
Theoretical and Experimental Study of Sheet Metal Bending By Pulsed
Nd: YAG Laser
GM HOSSEINPOUR, NH MOSLEMI, GH Liaghat, S Jelvani, ...
IRANIAN JOURNAL OF MECHANICAL ENGINEERING (ENGLISH) 9 (111), 15-35
|
| 2008 |
Analysis of Oblique Penetration of Conical Projectiles into Thin Metallic
Plates
MH Pol, GH Liaghat, AV Hoseini
Aero. Mech J 5 (2), 1-10
|
| 2008 |
An experimental study of sheet metal bending by pulsed Nd:YAG laser
with DOE method
MH Gollo, HM Naeini, GH Liaghat, MJ Torkamany, S Jelvani
International Journal of Material Forming 1 (SUPPL), 137-140
|
| 2008 |
Experimental study of low velocity impact on Sandwich panels with honeycomb
core and Comparison with the FEM results
N Abdolrahim, GH Liaghat, HA Askari
AA 49 (1), 45
|
| 2007 |
OS13-1-2 Analysis of oblique penetration of conical projectiles into
thin metallic targets
MH PoL, GH Liaghat
The Abstracts of ATEM: International Conference on Advanced Technology
in …
|
| 2007 |
Numerical analysis of plastic deformation of a circular sheet metal
subjected to transverse impact loading
SH Ghaderi, HM Naeini, GH Liaghat
International journal of impact engineering 34 (4), 668-680
|
| 2006 |
Evaluation of Fibers Orientation in Pipes Produced by Rotating Die System
M Kokabi, F Hadi, A Jaffarian, GH Liaghat
Iranian Journal of Polymer Science and Technology 19 (5), 353-359
|
| 2006 |
Evaluation of Reinforced Plastic Pipes Efficiency in Rotating Die System
M Kokabi, F Hadil, GH Liaghat
Iranian Journal of Polymer Science and Technology 19 (4), 285-290
|
| 2006 |
Analysis of deformation behaviour of the large diameter pipe by UO bending
process
HM Naeini, GH Liaghat, R Mahshid, A Sajedinejad, K Vahedi, ...
Journal of materials processing technology 177 (1-3), 179-182
|
| 2006 |
Incremental deformation and penetration analysis of deformable projectile
into semi-infinite target
H Khoda-Rahmi, A Fallahi, GH Liaghat
International Journal of Solids and Structures 43 (3-4), 569-582
|
| 2006 |
ANALYSIS EXPERIMENTAL STUDY OF EXPLOSIVE WELDING AND FORMING OF INHOMOGENEOUS
PLATES
H BISADI, GHH LIAGHAT, A DARVIZEH, NH MOSLEMI
INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING AND PRODUCTION MANAGEMENT
…
|
| 2006 |
MANUFACTURING OF CARBON STEEL-STAINLESS STEEL TWO LAYER PIPES, BY EXPLOSIVE
WELDING TECHNIQUE
GHH LIAGHAT, E ZAMANI
JOURNAL OF ENERGETIC MATERIALS 1 (2), 3-13
|
| 2005 |
NORMAL PENETRATION ANALYSIS OF DEFORMABLE PROJECTILES INTO METALLIC
TARGETS AND ITS EXTENSION TO OBLIQUE PENETRATION
G LIAGHAT, NH MOSLEMI, S FELLI
MODARES TECHNICAL AND ENGINEERING
|
| 2005 |
The mechanics of normal and oblique penetration of conical projectiles
into multi layer metallic targets
GH Liaghat, H Moslemi Naeini, S Felli
Iranian Journal of science and Technology, Transaction B: Engineering
29 (2 …
|
| 2004 |
Dynamic crushing of thin-walled columns under Impact of projectile
A Alavinia, GH Liaghat
12th International Conference on Mechanical Engineering, Tehran,
Iran
|
| 2004 |
A new penetration model of blunt projectiles into metallic targets and
a comparison to the results of LS-Dyna modeling
GHH LIAGHAT, NH MOSLEMI, S FELI
AMIRKABIR 15 (57), 53-70
|
| 2004 |
Two Dimensional FE Simulation of High Rate Deformation of Tube In Explosive
Welding Process
AAF DARVIZEH, GHH LIAGHAT, MD Nouri
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (ENGLISH) 15 (1), 33-43
|
| 2004 |
Penetration analysis of deformable projectiles into metallic targets
by considering plastic stress waves theory
GHH LIAGHAT, NH MOSLEMI, S Felli
AMIRKABIR 15 (57), 84-100
|
| 2004 |
A NEW ANALYTICAL MODEL FOR THE BEHAVIOR OF RIGID-STRAIN HARDENED HONEYCOMB
STRUCTURES UNDER AXIAL QUASI-STATIC LOADING
J ZAMANI, G LIAGHAT, H DAGHYANI, M SADIGHI
MODARES TECHNICAL AND ENGINEERING
|
| 2003 |
BALLISTIC LIMIT CALCULATION FOR ALUMINUM HONEYCOMB PANELS UNDER IMPACT
OF RIGID CYLINDRICAL PROJECTILES
GHH LIAGHAT, HR DAGHYANI, M SADIGHI, A ALAVINIA
AMIRKABIR 14 (55), 790-801
|
| 2003 |
NUMERICAL SIMULATION OF HIGH RATE DEFORMATION OF TUBE IN EXPLOSIVE WELDING
PROCESS
A DARVIZEH, GHH LIAGHAT, MD NOURI
MODARES TECHNICAL AND ENGINEERING
|
| 2003 |
Dynamic crushing of honeycomb panels under impact of cylindrical projectiles
GHH LIAGHAT, M SADIGHI, HR DAGHYANI, A Alavinia
AMIRKABIR 14 (53), 68-79
|
| 2003 |
A comment on the axial crush of metallic honeycombs by Wu and Jiang
G Liaghat, A Alavinia
International Journal of Impact Engineering 28 (10), 1143-1146
|
| 2003 |
ANALYTICAL, EXPERIMENTAL, AND NUMERICAL STUDY OF VERTICAL VELOCITY AND
VERTICAL DISPLACEMENT PROFILES, REQUIRED PRESSURE AND FINAL PRODUCT
DIMENSIONS DURING CONE EXPLOSIVE FORMING
D JAVABVAR, G LIAGHAT, A DARVIZEH, A ABD ELAH
JOURNAL OF FACULTY OF ENGINEERING (UNIVERSITY OF TEHRAN) 37 (179),
97-112
|
| 2003 |
ANALYTICAL, EXPERIMENTAL AND NUMERICAL STUDY OF HOOP STRAIN PROFILE
AND REQUIRED CHARGE MASS DURING CONE EXPLOSIVE FORMING
G LIAGHAT, D JAVABVAR, A DARVIZEH, A ABD ELAH
AMIRKABIR 14 (55), 765-779
|
| 2003 |
Introducing a new folding mechanism determining crushing strength of
honeycomb
J ZAMANI, G Liaghat, M Sadighi, H DAGHYANI
AMIRKABIR 14 (55), 734-754
|
| 2003 |
CRUSHING OF METALLIC HONYCOMB STRUCTURES UNDER QUASI-STATIC LOADING
G LIAGHAT, M Sadighi, HR Daghiani, NIAA ALAVI
JOURNAL OF FACULTY OF ENGINEERING (UNIVERSITY OF TEHRAN) 37 (179),
145-156
|
| 2002 |
Analysis of explosive forming of conical cups, comparison of experimental
and FEM simulation results
GH Liaghat, A Darvizeh, D Javabvar, A Abdollah
Amirkabir J 50, 250-264
|
| 2002 |
PENETRATION ANALYSIS OF LONG ROD PROJECTILES INTO SEMI-INFINITE TARGETS
AND EXTENSION TO MULTI-LAYER TARGETS
GHH LIAGHAT, RH KHODA, AR FALAHI
MODARES TECHNICAL AND ENGINEERING
|
| 2002 |
ANALYSIS OF CONE WRINKLING DURING EXPLOSIVE FORMING WITH COMPARE TO
EXPERIMENTAL RESULTS
GHH LIAGHAT, AAF DARVIZEH, A ABD ELAH, D JAVABVAR
INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING AND PRODUCTION MANAGEMENT
…
|
| 2002 |
Effect of impact parameters on explosive welding of tube to a plug
GHH LIAGHAT, MD Nouri, A Darvizeh, STS AL HASSANI, K Kormi
INTERNATIONAL JOURNAL OF ENGINEERING 15 (3), 285-298
|
| 2002 |
EFFECT OF BLANK HOLDER ON THE CONTROL OF CONE WRINKLING AND ANALYTICAL-EXPERIMENTAL
STUDY OF IT DURING EXPLOSIVE FORMING
G LIAGHAT, A DARVIZEH, A ABD ELAH, D JAVABVAR
AMIRKABIR 13 (52), 580-590
|
| 2002 |
ANALYSIS OF CONE FORMING EXPLOSIVE OF AND A COMPARISON OF EXPERIMENTAL,
FEM AND ANALYTICAL RESULTS
G LIAGHAT, A DARVIZEH, A ABD ELAH, D JAVABVAR
AMIRKABIR 13 (50), 250-264
|
| 2001 |
Working pressure, deformation modes and fracture in open-piercing of
cylindrical disks made of compacted sintered aluminium powder
NR Chitkara, GH Liaghat
The International Journal of Advanced Manufacturing Technology 17,
889-909
|
| 2001 |
AN EXTENSION TO DISKSHIT & SUNDARARAJAN MODEL FOR PENETRATION ANALYSIS
OF DEFORMING PROJECTILES
RH KHODA, AA FALLAHI, GHH LIAGHAT
AMIRKABIR 12 (47), 280-287
|
| 2001 |
A NUMERICAL SIMULATION FOR DEEP DRAWING PROCESS
NH MOSLEMI, GHH LIAGHAT, M KIUCHI, M GOUDARZI
AMIRKABIR 12 (48), 377-386
|
| 1999 |
A modification to the mathematical model of perforation by Dikshit and
Sundararajan
GH Liaghat, A Malekzadeh
International journal of impact engineering 22 (5), 543-550
|
| 1995 |
A comment on the penetration theory by dikshit and sundararjan
GH Liaghat, A Malekzadeh
International Journal of Impact Engineering 16 (4), 691-693
|
| 1992 |
Comparision of Perforation Theories and Some Experimental Results
G Liaghat
International Journal of Engineering 5 (3), 119-128
|
| 1991 |
Analysis of the Mechanics of Preforation by Projectiles
G Liaghat
International Journal of Engineering 4 (3), 127-140
|
| 1985 |
Working Pressure Deformation Modes and Fracture in Open Piercing of
Cylindrical Discs Made of Sintered Aluminium Powders
GH Liaghat
|
| |
Experimental investigation of the quasi-static response of pure polypropylene
and aluminum tubes
MR Faraz, GH Liaghat, H Ahmadi, AR Tarafdar
|
| |
STF
A Khodadadi, GH Liaghat, MA Akbari
|
| |
EFFECT OF IMPACT PARAMETERS ON
GH Liaghat, MD Nouri
|
| |
Experimental Investigations on the Buckling Behavior of Unstiffened,
Lozenge Grid-Stiffened and Lozenge Lattice Composite Cylindrical Shells
Under Axial Loading
A Talezadehlari, G Rahimi, G Liaghat, M Moeinifard
|
| |
Development of a Contact Model for Analyzing a 2-D Elastic–Plastic Reshaping
Process of Pipes
S Mazdak, MJ Kheljan, MS Tehrani, H Moslemi-Naeini, G Liaghat
|
| |
Nickel-Based Superalloy Layer Deposited on AISI H13 Hot Tool Steel Base
Metal Using Explosion Cladding Process
MRKG Shiran, H Bakhtiari, SAAA Mousavi, A Amadeh, G Liaghat
|
| |
Numerical and exp Kevlar fabrics and the ballistic perform
A Khodadadi, G Liaghat
|
| |
Analysis of Penetration Process of Blunt Deformable Projectiles into
Metallic Targets
MZ Mirdamadi, S Felli, D Radmehr, GH Liaghat
|
| |
ANALYTICAL STUDIES ON THE LOW-VELOCITY IMPACT ON COMPOSITE BEAM
S Seifoori, GH Liaghat
|
| |
Analytical modeling glass
GH Liaght
|
| |
The Bending Angle Prediction, Using the Size of Microstructure Change
in the Laser Forming Process
S Jelvani, HM Naeini, G Liaghat, MH Gollo
|
| |
Quasi-Static Penetration of Glass Fiber Reinforced Composite and Nano-Composite
A Afrouzian, GH Liaghat, HMAS Pouryazdian
|
| |
Mechanical response of ceramic foam sandwich panels sub-jected to quasi-static
indentation loads
S Pouryazdian, GH Liaghat, ARBA Afrouzian
|
| |
Published monthly by Tarbiat Modares University. Publishes
G Liaghat, M Maerefat, A Sohrabi, M Ashjaei, H Shokohmand, G Liaght,
...
|
| |
Forming Limit Curve at Neck and Forming Limit Curve at Fracture in Hydroforming
of Aluminum Tubes
HD Azodi, SJ Hashemi, HM Naeini, GH Liaghat
|
| |
FINITE ELEMENT EVALUATION OF PROJECTILE NOSE CURVATURE RADIUS EFFECT
IN BALLISTIC PERFORATION OF COMPOSITE MATERIALS
MJ Khoshgoftar, GH Rahimi, GH Liaghat, H Khodarahmi
|
| |
Influence of multiwall carbon nanotubes in mechanical properties of
E-glass/epoxy resin/jeffamine-D400 composites
MJ Khoshgoftar, GH Liaghat
|
| |
Delamination study in polymer composites reinforced by glass fiber in
ballistic impact
MJ Khoshgoftar, M Mirzaali, GH Liaghat, S Seifoori
|
| |
ANALYTICAL STUDIES ON THE LOW-VELOCITY IMPACT RESPONSE OF TIMOSHENKO
NANOBEAMS
S Seifoori, GH Liaghat, MJ Khoshgoftar
|
| |
Studies on the mechanical properties of composites reinforced with nanoparticles
G Liaghat
|
