| Year |
Title |
| 2023 |
Experimental and numerical analysis of shape memory sinusoidal lattice structure: Optimization through fusing an artificial neural network to a genetic algorithm
S Hosseini, A Farrokhabadi, D Chronopoulos
Composite Structures 323, 117454
|
| 2023 |
Experimental study of energy absorption capability in the lattice structures based on the octagonal bipyramid unit cell
M Sadeghzade, H Gharehbaghi, H Toozandehjani, A Farrokhabadi
Journal of the Brazilian Society of Mechanical Sciences and Engineering 45 …
|
| 2023 |
Experimental investigation of damages in the bimorph piezoelectric energy
harvester with multilayer composite substrate
A Jamshiddoust, M Avarzamani, A Farrokhabadi
Mechanical Systems and Signal Processing 195, 110307
|
| 2023 |
Investigation of energy absorption performances of a 3D printed fiber-reinforced
bio-inspired cellular structure under in-plane compression loading
F Ghorbani, H Gharehbaghi, A Farrokhabadi, A Bolouri, AH Behravesh,
...
Mechanics of Advanced Materials and Structures, 1-19
|
| 2023 |
Study of equivalent mechanical properties and energy absorption of composite
honeycomb structures
A Farrokhabadi, H Gharehbaghi, H Malekinejad, M Sebghatollahi, ...
International Journal of Applied Mechanics, 2350038
|
| 2023 |
Investigation of the equivalent mechanical properties of the bone-inspired
composite cellular structure: Analytical, numerical and experimental approaches
F Ghorbani, H Gharehbaghi, A Farrokhabadi, A Bolouri
Composite Structures, 116720
|
| 2023 |
Study of Electrostatic and Dispersion Forces in Nanoelectromechanical Systems
(NEMS)
M SoltanRezaee, A Farrokhabadi
Nanotechnology in Electronics: Materials, Properties, Devices, 127-154
|
| 2023 |
Introducing a new hybrid surface strut-based lattice structure with enhanced
energy absorption capacity
H Gharehbaghi, A Farrokhabadi, Z Noroozi
Mechanics of Advanced Materials and Structures, 1-10
|
| 2022 |
Experimental and numerical investigation of the energy absorption capability
of the bi-material lattice structure
H Gharehbaghi, A Farrokhabadi
Journal of Science and Technology of Composites 9 (2), 1976-1982
|
| 2022 |
Micromechanical investigation of cross-ply carbon composite laminates with
glass microtubes using CZM and XFEM
A Farrokhabadi, H Madadi, M Naghdinasab, A Rafie, SA Taghizadeh, ...
Mechanics of Advanced Materials and Structures 29 (26), 5624-5636
|
| 2022 |
Assessment of fiber-reinforcement and foam-filling in the directional energy
absorption performance of a 3D printed accordion cellular structure
A Farrokhabadi, MM Ashrafian, AH Behravesh, SK Hedayati
Composite Structures 297, 115945
|
| 2022 |
Crashworthiness characteristics of composite cylindrical energy absorbers
filled with honeycomb and foam under quasi-static load: experimental and
analytical study
R Sarkhosh, A Farrokhabadi, H Zarei
Journal of the Brazilian Society of Mechanical Sciences and Engineering
44 …
|
| 2022 |
Modelling of Self-Sensing Hybrid Composites for Detection of Barely Visible
Impact Damage
S Fotouhi, MM Ashrafiyan, M Jalalvand, A Farrokhabadi, M Fotouhi, ...
|
| 2022 |
Finite element reliability analysis of edge delamination onset due to interlaminar
stresses in composite laminates
A Delbariani-Nejad, A Farrokhabadi, M Fotouhi
Composite Structures 288, 115410
|
| 2022 |
The investigation of mid-layer cracks effects on the performance of bimorph
piezoelectric energy harvester with silicon substrate
A Jamshiddoust, A Farrokhabadi
|
| 2022 |
Design and characterization of an orthotropic accordion cellular honeycomb
as one-dimensional morphing structures with enhanced properties
A Farrokhabadi, MM Ashrafian, M Fotouhi
Journal of Sandwich Structures & Materials 24 (3), 1726-1745
|
| 2022 |
Investigating the Effect of Interface Angle and Ply Thickness on Mode II
Delamination Behaviour of Carbon/Epoxy Laminated Composites
S Fotouhi, A Tabatabaeian, S Lotfan, A Farrokhabadi, M Fotouhi
|
| 2022 |
Propose a generic framework for probabilistic prediction of the onset and
growth of matrix cracking induced delamination in composite laminates
A Delbariani-Nejad, A Farrokhabadi, M Fotouhi
Engineering Fracture Mechanics 261, 108262
|
| 2022 |
Introducing the new lattice structure based on the representative element
double octagonal bipyramid
H Gharehbaghi, M Sadeghzade, A Farrokhabadi
Aerospace Science and Technology 121, 107383
|
| 2022 |
Corrugated Core-and Fold Core-Based Sandwich Panels
A Farrokhabadi, MN Nasab
Sandwich Composites, 27-44
|
| 2022 |
Experimental investigation of the effect of natural microfibers on the mode
I fracture toughness of plain-woven laminated composites
A Zeinolabedin Beygi, M Salamat-talab, A Farrokhabadi, ...
Modares Mechanical Engineering 22 (2), 71-79
|
| 2022 |
Effect of core shape on debonding failure of composite sandwich panels with
foam-filled corrugated core
H Malekinejadbahabadi, A Farrokhabadi, GH Rahimi, A Nazerigivi
Steel and Composite Structures 45 (3), 467
|
| 2021 |
Investigation of the energy absorption capacity of foam-filled 3D-printed
glass fiber reinforced thermoplastic auxetic honeycomb structures
A Farrokhabadi, H Veisi, H Gharehbaghi, J Montesano, AH Behravesh, ...
Mechanics of Advanced Materials and Structures, 1-12
|
| 2021 |
Experimental and analytical studies of mechanical properties of additively
manufactured lattice structure based on octagonal bipyramid cubic unit cell
M Sadeghzade, H Gharehbaghi, A Farrokhabadi
Additive Manufacturing 48, 102403
|
| 2021 |
Evaluation of the equivalent mechanical properties in a novel composite
cruciform honeycomb using analytical and numerical methods
A Farrokhabadi, MM Ashrafian, H Gharehbaghi, R Nazari
Composite Structures 275, 114410
|
| 2021 |
Anticipating the induced delamination formation in composite laminates subjected
to bending loads
M Bahrami, M Malakouti, A Farrokhabadi
Fatigue & Fracture of Engineering Materials & Structures 44 (11), 3108-3120
|
| 2021 |
Cumulative acoustic emission energy for damage detection in composites reinforced
by carbon fibers within low-cycle fatigue regime at various displacement
amplitudes and rates
M Azadi, M Alizadeh, SM Jafari, A Farrokhabadi
Polymers and Polymer Composites 29 (9_suppl), S36-S48
|
| 2021 |
The effect of staggered matrix crack induced delamination growth on the
mechanical properties of cross-ply laminates
SR Jafari, A Farrokhabadi, J Montesano
Composite Structures 272, 114196
|
| 2021 |
Fatigue Performance Analysis of GRE Composite Pipes by Conducting Tension-Tension
Tests on the Rings Cut from the Pipe
H Mahdavi, A Farrokhabadi, GH Rahimi
Journal of Testing and Evaluation 49 (4), 2767-2778
|
| 2021 |
Determination of static strength and fracture of aged aircraft structure
using non-destructive quasi-static indentation test
H Zarei, R Sarkhosh, A Farrokhabadi, H Morshedi
Journal of aeronautical engineering 23 (1), 33-43
|
| 2021 |
Reliability analysis of the delamination onset and growth due to the matrix
cracking in general composite laminates
A Delbariani-Nejad, A Farrokhabadi, M Fotouhi
Journal of Science and Technology of Composites 8 (1), 1397-1410
|
| 2021 |
In situ strength analysis of cross‐ply composite laminates containing defects
and interleaved woven layer using a computational micromechanics approach
A Rafie, H Madadi, A Farrokhabadi, M Herráez
Fatigue & Fracture of Engineering Materials & Structures 44 (5), 1225-1240
|
| 2021 |
Optimum power of a nonlinear piezomagnetoelastic energy harvester with using
multidisciplinary optimization algorithms
M Tahmasbi, A Jamshiddoust, A Farrokhabadi
Journal of Intelligent Material Systems and Structures 32 (8), 889-903
|
| 2021 |
Assessment of delamination growth due to matrix cracking in hybrid Glass-Kevlar
composite laminates using experimental, numerical and analytical methods
A Farrokhabadi, S Neyestani, D Akbari, R Sarkhosh
Engineering Fracture Mechanics 247, 107691
|
| 2021 |
The effect of core shape on the bending response of sandwich panels with
filled and unfilled sine and square corrugated cores
F Hamidin, A Farrokhabadi, H Ahmadi
Journal of Failure Analysis and Prevention 21, 537-546
|
| 2021 |
Finite Element Reliability Analysis of Edge Delamination Onset Due to the
Interlaminar Stresses in General Composite Laminates
A Delbariani-Nejad, A Farrokhabadi, H Haddad Khodaparast, M Fotouhi
|
| 2021 |
Investigation of novel multi-layer sandwich panels under quasi-static indentation
loading using experimental and numerical analyses
SA Taghizadeh, M Naghdinasab, H Madadi, A Farrokhabadi
Thin-Walled Structures 160, 107326
|
| 2021 |
Investigation of the equivalent material properties and failure stress of
the re-entrant composite lattice structures using an analytical model
H Veisi, A Farrokhabadi
Composite Structures 257, 113161
|
| 2021 |
Experimental investigation of Buckling after impact strength of grid stiffened
composite panels
A Ataei, H Ahmadi, A Farrokhabadi
Iranian Journal of Manufacturing Engineering 7 (11), 34-41
|
| 2021 |
Experimental Investigation of Energy Absorption of Aluminum/Composite Hybrid
Tube Produced by Tape Winding Method under Quasi-Static Load.
Z HR
Modares Mechanical Engineering 21 (1)
|
| 2020 |
Experimental and numerical analysis of novel multi-layer sandwich panels
under three point bending load
A Farrokhabadi, SA Taghizadeh, H Madadi, H Norouzi, A Ataei
Composite Structures 250, 112631
|
| 2020 |
Determining of a closed-form relation for evolution of crack density and
induced delamination in off-axis composite laminates under uniaxial loading
condition
MA Samani, A Farrokhabadi, S Homayoni Boora
Mechanics of Advanced Materials and Structures 27 (11), 859-868
|
| 2020 |
Numerical investigation of matrix cracking propagation in cross‐ply laminated
composites subjected to three‐point bending load using concurrent multiscale
model
H Madadi, M Naghdinasab, A Farrokhabadi
Fatigue & Fracture of Engineering Materials & Structures 43 (6), 1159-1169
|
| 2020 |
Investigation of debonding growth between composite skins and corrugated
foam-composite core in sandwich panels under bending loading
HM Bahabadi, A Farrokhabadi, GH Rahimi
Engineering Fracture Mechanics 230, 106987
|
| 2020 |
Prediction of debonding growth in two-dimensional RVEs using an extended
interface element based on continuum damage mechanics concept
R Babaei, A Farrokhabadi
Composite Structures 238, 111981
|
| 2020 |
A failure criterion to predict the onset of matrix cracking induced delamination
in general composite laminates
A Delbariani-Nejad, A Farrokhabadi
Composite Structures 235, 111564
|
| 2019 |
Reliability analysis of metal‐composite adhesive joints under debonding
modes I, II, and I/II using the results of experimental and FEM analyses
A Delbariani‐Nejad, M Malakouti, A Farrokhabadi
Fatigue & Fracture of Engineering Materials & Structures 42 (12), 2644-2662
|
| 2019 |
Nonlinear stability analysis of piecewise actuated piezoelectric microstructures
M SoltanRezaee, M Bodaghi, A Farrokhabadi, R Hedayati
International Journal of Mechanical Sciences 160, 200-208
|
| 2019 |
Modeling, analysis, and control of MFC sandwiched laminate panel flutter
with general layups and arbitrary boundary conditions
M Baghaee, A Farrokhabadi, RA Jafari-Talookolaei
Composite Structures 223, 110940
|
| 2019 |
Predicting the matrix cracking formation in symmetric composite laminates
subjected to bending loads
A Farrokhabadi, M Bahrami, R Babaei
Composite Structures 223, 110945
|
| 2019 |
A thermosensitive electromechanical model for detecting biological particles
M SoltanRezaee, M Bodaghi, A Farrokhabadi
Scientific reports 9 (1), 11706
|
| 2019 |
Evaluation the energy release rate of induced delamination due to matrix
cracking in symmetric composite laminate
M Rahmani, A Farrokhabadi
Journal of Science and Technology of Composites 6 (1), 53-68
|
| 2019 |
A solution method based on Lagrange multipliers and Legendre polynomial
series for free vibration analysis of laminated plates sandwiched by two
MFC layers
M Baghaee, A Farrokhabadi, RA Jafari-Talookolaei
Journal of Sound and Vibration 447, 42-60
|
| 2019 |
Development of an integrated micro macro model for anticipating matrix cracking
evolution and fiber breakage in the laminated composite containing an open
hole
A Farrokhabadi, R Babaei
Engineering Fracture Mechanics 211, 161-179
|
| 2019 |
Propagation of Matrix Cracking and Induced Delaminatin in Cross-Ply Composite
Beams Subjected to Bending Loads
M Bahrami, A Farrokhabadi
Mechanics of Advanced Composite Structures 6 (1), 45-50
|
| 2019 |
Predicting the debonding formation and induced matrix cracking evolution
in open-hole composite laminates using a semi-consequence micro-macro model
R Babaei, A Farrokhabadi
Composite Structures 210, 274-293
|
| 2019 |
Characterization of compressive behavior of PVC foam infilled composite
sandwich panels with different corrugated core shapes
SA Taghizadeh, A Farrokhabadi, G Liaghat, E Pedram, H Malekinejad, ...
Thin-Walled Structures 135, 160-172
|
| 2019 |
Dynamic pull-in of thermal cantilever nanoswitches subjected to dispersion
and axial forces using nonlocal elasticity theory
F Tavakolian, A Farrokhabadi, M SoltanRezaee, S Rahmanian
Microsystem Technologies 25, 19-30
|
| 2018 |
Failure Analysis of (± 55°)9 Filament-Wound GRE Pipes Using Explicit
Finite Element Method: A Comparison with the Experimental Method
H Mahdavi, GH Rahimi, A Farrokhabadi
Journal of Failure Analysis and Prevention 18, 1526-1533
|
| 2018 |
A new semi-analytical solution method for free vibration analysis of composite
rectangular plates with general edge constraints coupled with single piezoelectric
layer
M Baghaee, A Farrokhabadi, RA Jafari-Talookolaei
Journal of Intelligent Material Systems and Structures 29 (20), 3873-3889
|
| 2018 |
Prediction of induced delamination development in [θ/90] s composite laminates
using a computational analytical approach
M Rahmani, A Farrokhabadi
Composite Structures 203, 903-916
|
| 2018 |
A variational approach for predicting initiation of matrix cracking and
induced delamination in symmetric composite laminates under in-plane loading
SS Taghavi Larijani, A Farrokhabadi
Science and Engineering of Composite Materials 25 (5), 855-868
|
| 2018 |
Development a refined numerical model for evaluating the matrix cracking
and induced delamination formation in cross-ply composite laminates
H Madadi, A Farrokhabadi
Composite Structures 200, 12-24
|
| 2018 |
An energy based approach for reliability analysis of delamination growth
under mode I, mode II and mixed mode I/II loading in composite laminates
A Delbariani-Nejad, A Farrokhabadi, SR Jafari
International Journal of Mechanical Sciences 145, 287-298
|
| 2018 |
The effect of the arrangement of corrugated composite on the R-curve of
the sandwich structures with hybrid corrugated/foam core under mode I loading
MS Gazor, GH Rahimi, A Farrokhabadi
Theoretical and Applied Fracture Mechanics 96, 326-333
|
| 2018 |
A numerical method to evaluate the material properties degradation in composite
RVEs due to fiber-matrix debonding and induced matrix cracking
M Naghdinasab, A Farrokhabadi, H Madadi
Finite Elements in Analysis and Design 146, 84-95
|
| 2018 |
Investigation of skin/core debonding effects on the natural frequencies
of composite sandwich structures using experimental and numerical modal
analysis
H Maleki Nejad Bahabadi, A Farrokhabadi, MM Khatibi, R Rahmani
Journal of Science and Technology of Composites 5 (1), 91-98
|
| 2018 |
Experimental and numerical investigation of skin/lattice stiffener debonding
growth in composite panels under bending loading
F Kamareh, A Farrokhabadi, G Rahimi
Engineering Fracture Mechanics 190, 471-490
|
| 2018 |
Investigation of displacement amplitude effect on failure mechanisms in
open-hole laminated composites under low-cycle fatigue loading using acoustic
emission
M Alizadeh, M Azadi, A Farrokhabadi, SM Jafari
Modares Mechanical Engineering 17 (12), 435-445
|
| 2018 |
Failure analysis of Glass-Reinforced epoxy pipes under internal hydrostatic
pressure: a comparison with the split disk test method
HR Mahdavi, GH Rahimi, A Farrokhabadi
Journal of Pressure Vessel Technology 140 (1)
|
| 2017 |
Size-dependent dynamic analysis of rectangular nanoplates in the presence
of electrostatic, Casimir and thermal forces
A Farrokhabadi, F Tavakolian
Applied Mathematical Modelling 50, 604-620
|
| 2017 |
Size-dependent dynamic instability of double-clamped nanobeams under dispersion
forces in the presence of thermal stress effects
F Tavakolian, A Farrokhabadi
Microsystem Technologies 23, 3685-3699
|
| 2017 |
Matrix cracking and induced delamination in symmetrically laminated composites
subjected to static loading by using multi scale damage mechanics
B Mohammadi, S Asl Kamkar, A Farrokhabadi
Journal of Science and Technology of Composites 4 (1), 9-24
|
| 2017 |
Pull-in instability of double clamped microbeams under dispersion forces
in the presence of thermal and residual stress effects using nonlocal elasticity
theory
F Tavakolian, A Farrokhabadi, M Mirzaei
Microsystem Technologies 23, 839-848
|
| 2017 |
Micromechanical prediction of damage due to transverse ply cracking under
fatigue loading in composite laminates
B Mohammadi, M Rohanifar, D Salimi-Majd, A Farrokhabadi
Journal of Reinforced Plastics and Composites 36 (5), 377-395
|
| 2017 |
A computational continuum damage mechanics model for predicting transverse
cracking and splitting evolution in open hole cross‐ply composite laminates
R Babaei, A Farrokhabadi
Fatigue & Fracture of Engineering Materials & Structures 40 (3), 375-390
|
| 2017 |
A generalized plane-strain crack density-based model for evaluating the
finite fracture toughness of composite laminates
A Farrokhabadi, B Mohammadi, H Hosseini-Toudeshky
Mechanics of Advanced Materials and Structures 24 (2), 131-141
|
| 2016 |
The influence of dispersion forces on the size-dependent pull-in instability
of general cantilever nano-beams containing geometrical non-linearity
M SoltanRezaee, A Farrokhabadi, MR Ghazavi
International Journal of Mechanical Sciences 119, 114-124
|
| 2016 |
Analytical solution of piezoelectric energy harvester patch for various
thin multilayer composite beams
A Paknejad, G Rahimi, A Farrokhabadi, MM Khatibi
Composite Structures 154, 694-706
|
| 2016 |
Numerical and experimental investigation of skin/core debonding in composite
sandwich structures with corrugated core under bending loading
H Malekinejad Bahabadi, GH Rahimi, A Farrokhabadi
Modares Mechanical Engineering 16 (6), 52-62
|
| 2016 |
Micromechanical study of fibre-matrix debonding and matrix cracking using
cohesive zone model and extended finite element method
A Farrokhabadi, M Naghdinasab
Journal of Science and Technology of Composites 3 (1), 21-30
|
| 2016 |
Effect of surface layer on electromechanical stability of tweezers and cantilevers
fabricated from conductive cylindrical nanowires
M Keivani, A Koochi, HM Sedighi, M Abadyan, A Farrokhabadi, ...
Surface Review and Letters 23 (02), 1550101
|
| 2016 |
Failure analysis of (±55) 9 filament-wound GRE pipes using acoustic emission
technique
HR Mahdavi, GH Rahimi, A Farrokhabadi
Engineering Failure Analysis 62, 178-187
|
| 2016 |
An improved model for the cantilever NEMS actuator including the surface
energy, fringing field and Casimir effects
A Farrokhabadi, A Mohebshahedin, R Rach, JS Duan
Physica E: Low-dimensional Systems and Nanostructures 75, 202-209
|
| 2015 |
Damage Energy Evaluation in [55/-55] 9 Composite Pipes using Acoustic Emission
Method
HR Mahdavi, GH Rahimi, A Farrokhabadi, H Saadatmand
Mechanics Of Advanced Composite Structures 2 (2), 127-134
|
| 2015 |
A simplified micromechanics model for predicting the stiffness degradation
in symmetric composite laminates
A Farrokhabadi, B Mohammadi, H Hosseini‐Toudeshky
Fatigue & Fracture of Engineering Materials & Structures 38 (11), 1334-1346
|
| 2015 |
The influence of the surface energy on the instability behavior of NEMS
structures in presence of intermolecular attractions
A Mohebshahedin, A Farrokhabadi
International Journal of Mechanical Sciences 101, 437-448
|
| 2015 |
A theoretical model for investigating the effect of vacuum fluctuations
on the electromechanical stability of nanotweezers
A Farrokhabadi, J Mokhtari, A Koochi, M Abadyan
Indian Journal of Physics 89, 599-609
|
| 2015 |
Theoretical modeling of the effect of Casimir attraction on the electrostatic
instability of nanowire-fabricated actuators
J Mokhtari, A Farrokhabadi, R Rach, M Abadyan
Physica E: Low-dimensional Systems and Nanostructures 68, 149-158
|
| 2015 |
Modeling the size dependent instability of NEMS sensor/actuator made of
nano-wire with circular cross-section
A Koochi, A Farrokhabadi, M Abadyan
Microsystem Technologies 21, 355-364
|
| 2015 |
Modeling the influence of the Casimir force on the pull-in instability of
nanowire-fabricated nanotweezers
A Farrokhabadi, J Mokhtari, R Rach, M Abadyan
International Journal of Modern Physics B 29 (02), 1450245
|
| 2015 |
A generalized model for initiation of formation microcracking and delamination
in transverse cracked laminate with symmetric lay-ups
A Farrokhabadi, S Taghavi
|
| 2015 |
Analysis of embedded delamination growth in laminated composite using cohesive
surface method
A Farrokhabadi, SK Sangesari
|
| 2015 |
DETERMINATION OF A GENERAL CLOSED FORM RELATION FOR CRACK DENSITY AND INDUCED
DELAMINATION EVOLUTION IN CROSS PLY LAMINATES UNDER UNIAXIAL LOADING CONDITION
BASED ON AN …
A FARROKHABADI, SM AGHAEBRAHIMI
MODARES MECHANICAL ENGINEERING 15 (1), 361-370
|
| 2014 |
Effects of size-dependent elasticity on stability of nanotweezers
A Farrokhabadi, A Koochi, A Kazemi, M Abadyan
Applied Mathematics and Mechanics 35, 1573-1590
|
| 2014 |
Theoretical modeling of the Casimir force-induced instability in freestanding
nanowires with circular cross-section
A Farrokhabadi, N Abadian, R Rach, M Abadyan
Physica E: Low-dimensional Systems and Nanostructures 63, 67-80
|
| 2014 |
Casimir force-induced instability in freestanding nanotweezers and nanoactuators
made of cylindrical nanowires
A Farrokhabadi, N Abadian, F Kanjouri, M Abadyan
International Journal of Modern Physics B 28 (19), 1450129
|
| 2014 |
Modeling the instability of CNT tweezers using a continuum model
A Farrokhabadi, A Koochi, M Abadyan
Microsystem technologies 20, 291-302
|
| 2013 |
Modeling the static response and pull-in instability of CNT nanotweezers
under the Coulomb and van der Waals attractions
A Farrokhabadi, R Rach, M Abadyan
Physica E: Low-dimensional Systems and Nanostructures 53, 137-145
|
| 2013 |
Development of a damage analysis method in laminated composites using finite
fracture toughness of single lamina
A Farrokhabadi, H Hosseini-Toudeshky, B Mohammadi
Mechanics of Advanced Materials and Structures 20 (3), 177-188
|
| 2012 |
Implementation of a micro-meso approach for progressive damage analysis
of composite laminates
H Hosseini-Toudeshky, A Farrokhabadi, B Mohammadi
Structural Engineering and Mechanics 43 (5), 657-678
|
| 2012 |
Consideration of concurrent transverse cracking and induced delamination
propagation using a generalized micro‐meso approach and experimental validation
H Hosseini‐Toudeshky, A Farrokhabadi, B Mohammadi
Fatigue & Fracture of Engineering Materials & Structures 35 (9), 885-901
|
| 2011 |
Progressive Damage Analyses of Composite Laminates Exhibiting Free Edge
Effects Using a New Micro-Meso Approach
H Hosseini-Toudeshky, A Farrokhabadi, B Mohammadi
Key Engineering Materials 471, 263-267
|
| 2011 |
Analysis of damage events in quasi-isotropic laminates using a generalized
micromechanics approach
H Hosseini-Toudeshky, A Farrokhabadi, B Mohammadi
Procedia Engineering 10, 236-241
|
| 2011 |
A new self healing method in composite laminates using the hollow glass
fiber
M Nademi, A Mozaffari, A Farrokhabadi
Key Engineering Materials 471, 548-551
|
| 2011 |
A generalized micromechanical approach for the analysis of transverse crack
and induced delamination in composite laminates
A Farrokhabadi, H Hosseini-Toudeshky, B Mohammadi
Composite Structures 93 (2), 443-455
|
| 2010 |
Damage analysis of laminated composites using a new coupled micro‐meso approach
A Farrokhabadi, H Hosseini‐Toudeshky, B Mohammadi
Fatigue & Fracture of Engineering Materials & Structures 33 (7), 420-435
|
| 2009 |
Transverse crack density evolution in a single orthotropic lamina under
multi-axial stresses using analytical method
H Hosseini-Toudeshky, A Farrokhabadi, B Mohammadi
Procedia Engineering 1 (1), 109-112
|
