Year |
Title |
2023 |
Investigation on replacement of steel cord reinforcements with continuous and discontinuous carbon fibers in thermoplastic polyurethane based composites materials
NA Syed, T Muhammad, U Utkarsh, AH Behravesh, G Rizvi, R Pop-Iliev
AIP Conference Proceedings 2884 (1)
|
2023 |
Investigation of different bonding matrices for the development of electrically conductive thermoplastic composites
M Tariq, NA Syed, U Utkarsh, AH Behravesh, R Pop-Iliev, G Rizvi
AIP Conference Proceedings 2884 (1)
|
2023 |
Sensors for the Measurement of Shear Stress and Shear Strain-A Review on Materials, Fabrication, Devices, and Applications
A Tariq, A Behravesh, G Rizvi
Engineering Research Express
|
2023 |
Optimization of Filler Compositions of Electrically Conductive Polypropylene Composites for the Manufacturing of Bipolar Plates
M Tariq, Utkarsh, NA Syed, AH Behravesh, R Pop-Iliev, G Rizvi
Polymers 15 (14), 3076
|
2023 |
Additive manufacture of PLLA scaffolds reinforced with graphene oxide nano-particles via digital light processing (DLP)
O Kordi, AH Behravesh, S Hasannia, SK Hedayati, M Pourghaumi, ...
Journal of Biomaterials Applications, 08853282231202734
|
2023 |
Experimental investigation of electrolytically treated and silane grafted
carbon fiber-reinforced thermoplastic polyurethane composites
NA Syed, M Tariq, U Utkarsh, AH Behravesh, Q Guo, R Pop-Iliev, G Rizvi
Journal of Composite Materials 57 (13), 2189-2200
|
2023 |
Investigation of energy absorption performances of a 3D printed fiber-reinforced
bio-inspired cellular structure under in-plane compression loading
F Ghorbani, H Gharehbaghi, A Farrokhabadi, A Bolouri, AH Behravesh,
...
Mechanics of Advanced Materials and Structures, 1-19
|
2023 |
Introduction to foam induced shape memory effect: non-contact loading to
program shape memory polymers
M Barmouz, AH Behravesh
Journal of Intelligent Material Systems and Structures 34 (9), 1026-1041
|
2023 |
Mechanical properties of extruded continuous glass fiber reinforced wood
Particle/HDPE composites: Effects of glass bundle tex and arrangement
M Pourghayoumi, A Jamali, AH Behravesh, M Mazdi, SK Hedayati, ...
Journal of Composite Materials, 00219983221151033
|
2023 |
Non-destructive Evaluation of Artificial Defects in FDM Printed Parts Using
Pulse Thermography
M Hasani, D AKBARI, AH BEHRAVESH, KP Faraji
AEROSPACE MECHANICS JOURNAL 18 (470002028), 77-87
|
2022 |
Experimental evaluation of utilizing synthetic continuous fiber reinforcements
for thermoplastics as an alternative to steel-based analogs
NA Syed, U Utkarsh, M Tariq, AH Behravesh, Q Guo, G Rizvi, R Pop-Iliev
Journal of Elastomers & Plastics 54 (8), 1221-1237
|
2022 |
Assessment of fiber-reinforcement and foam-filling in the directional energy
absorption performance of a 3D printed accordion cellular structure
A Farrokhabadi, MM Ashrafian, AH Behravesh, SK Hedayati
Composite Structures 297, 115945
|
2022 |
Synergistic enrichment of electrically conductive polypropylene‐graphite
composites for fuel cell bipolar plates
M Tariq, Utkarsh, NA Syed, AH Behravesh, R Pop‐Iliev, G Rizvi
International Journal of Energy Research 46 (8), 10955-10964
|
2022 |
Comprehensive study on shape shifting behaviors in FDM-based 4D printing
of bilayer structures
IS Nezhad, M Golzar, AH Behravesh, S Zare
The International Journal of Advanced Manufacturing Technology 120 (1-2
?
|
2022 |
Mechanical performance of modified Polypropylene/Polyamide matrix reinforced
with treated recycled carbon fibers for lightweight applications
BS Maia, AH Behravesh, J Tjong, M Sain
Journal of Polymer Research 29 (4), 136
|
2022 |
Additive manufacture of PCL/nHA scaffolds reinforced with biodegradable
continuous Fibers: Mechanical Properties, in-vitro degradation Profile,
and cell study
SK Hedayati, AH Behravesh, S Hasannia, O Kordi, M Pourghaumi, ...
European Polymer Journal 162, 110876
|
2021 |
Investigation of the energy absorption capacity of foam-filled 3D-printed
glass fiber reinforced thermoplastic auxetic honeycomb structures
A Farrokhabadi, H Veisi, H Gharehbaghi, J Montesano, AH Behravesh, ...
Mechanics of Advanced Materials and Structures, 1-12
|
2021 |
Comprehensive Study on Shape Shifting Behaviors of Thermally Activated Hinges
in FDM-based 4D Printing
IS Nezhad, M Golzar, A Behravesh, S Zare
|
2021 |
Evaluating the effects of material extrusion 3D printing process parameters
on shape-shifting of Poly-lactic acid 4D-printed structures
IS Nezhad, M Golzar, AH Behravesh
|
2021 |
Investigation of the Effect of 3D printing parameters on shape-shifting
of flat sturctures to Three-Dimensional Shapes
M Jamshidi, I Salimi Nezhad, M Golzar, AH Behravesh
Journal of Science and Technology of Composites 7 (4), 1271-1278
|
2020 |
An in vitro study on the key features of Poly L-lactic acid/biphasic calcium
phosphate scaffolds fabricated via DLP 3D printing for bone grafting
AB Saed, AH Behravesh, S Hasannia, B Akhoundi, SK Hedayati, ...
European Polymer Journal 141, 110057
|
2020 |
Effects of design, porosity and biodegradation on mechanical and morphological
properties of additive-manufactured triply periodic minimal surface scaffolds
P Karimipour-Fard, AH Behravesh, H Jones-Taggart, R Pop-Iliev, G Rizvi
Journal of the Mechanical Behavior of Biomedical Materials 112, 104064
|
2020 |
Functionalized poly l-lactic acid synthesis and optimization of process
parameters for 3D printing of porous scaffolds via digital light processing
(DLP) method
AB Saed, AH Behravesh, S Hasannia, SAA Ardebili, B Akhoundi, ...
Journal of Manufacturing Processes 56, 550-561
|
2020 |
3D printed PCL scaffold reinforced with continuous biodegradable fiber yarn:
A study on mechanical and cell viability properties
SK Hedayati, AH Behravesh, S Hasannia, AB Saed, B Akhoundi
Polymer Testing 83, 106347
|
2020 |
The effect of bacterial preparations on the growth, development and quality
indicators of sugar beet yield
R Minikayev, L Gaffarova
BIO Web of Conferences 17, 00250
|
2020 |
An innovative design approach in three-dimensional printing of continuous
fiber?reinforced thermoplastic composites via fused deposition modeling
process: in-melt simultaneous ?
B Akhoundi, AH Behravesh, A Bagheri Saed
Proceedings of the Institution of Mechanical Engineers, Part B: Journal
of ?
|
2019 |
Effect of filling pattern on the tensile and flexural mechanical properties
of FDM 3D printed products
B Akhoundi, AH Behravesh
Experimental Mechanics 59, 883-897
|
2019 |
Porous graphitic biocarbon and reclaimed carbon fiber derived environmentally
benign lightweight composites
S Gezahegn, R Lai, L Huang, L Chen, F Huang, N Blozowski, SC Thomas,
...
Science of The Total Environment 664, 363-373
|
2019 |
The role of foaming process on shape memory behavior of polylactic acid-thermoplastic
polyurethane-nano cellulose bio-nanocomposites
M Barmouz, AH Behravesh
Journal of the Mechanical Behavior of Biomedical Materials 91, 266-277
|
2019 |
Improving mechanical properties of continuous fiber-reinforced thermoplastic
composites produced by FDM 3D printer
B Akhoundi, AH Behravesh, A Bagheri Saed
Journal of Reinforced Plastics and Composites 38 (3), 99-116
|
2018 |
Foaming and thermal characteristics of bio-based polylactic acid?thermoplastic
polyurethane blends
M Barmouz, A Hossein Behravesh
Journal of Cellular Plastics 54 (6), 931-955
|
2018 |
A modular extrusion die design to produce continuous glass fibers reinforced
PVC‐wood composite profiles
H Mohammad Taheri, AH Behravesh, M Kargar
Polymer Composites 39 (7), 2268-2276
|
2018 |
Investigation and analysis of glass fabric/PVC composite laminates processing
parameters
V Zal, H Moslemi Naeini, AR Bahramian, AH Behravesh, B Abbaszadeh
Science and Engineering of Composite Materials 25 (3), 529-540
|
2017 |
Shape memory behaviors in cylindrical shell PLA/TPU-cellulose nanofiber
bio-nanocomposites: Analytical and experimental assessment
M Barmouz, AH Behravesh
Composites Part A: Applied Science and Manufacturing 101, 160-172
|
2017 |
Morphological analysis of foamed HDPE/LLDPE blends by X-ray micro-tomography:
effect of blending, mixing intensity and foaming temperature
P Shahi, AH Behravesh, S Rasel, G Rizvi, R Pop-Iliev
Cellular Polymers 36 (5), 221-250
|
2017 |
Compressive shape memory behavior of spring‐shaped polylactic acid alloy
type
A Siahsarani, AH Behravesh, M Barmouz
Journal of Applied Polymer Science 134 (30), 45115
|
2017 |
Statistical and experimental investigation on low density microcellular
foaming of PLA-TPU/cellulose nano-fiber bio-nanocomposites
M Barmouz, AH Behravesh
Polymer Testing 61, 300-313
|
2017 |
Effect of printing parameters on Mechanical Strength of Polymer-Metal composites
Printed via FDM 3D printer
M Nabipour, AH Behravesh, B Akhoundi
Modares Mechanical Engineering 17 (1), 145-150
|
2017 |
Experimental Study of the Roll Forming of PVC/Glass Fabric Composite Laminates
V Zal, HM Naeini, AR Bahramian, B Shirani, AH Behravesh
Journal of Applied and Computational Sciences in Mechanics 28 (2)
|
2017 |
An experimental study on foaming of linear low-density polyethylene/high-density
polyethylene blends
P Shahi, AH Behravesh, A Haghtalab, G Rizvi, F Goharpei
Journal of Cellular Plastics 53 (1), 83-105
|
2016 |
Effect of mixing intensity on foaming behavior of LLDPE/HDPE blends in thermal
induced batch process
P Shahi, AH Behravesh, A Haghtalab, G Rizvi, R Pop-Iliev, F Goharpei
Polymer-Plastics Technology and Engineering 55 (9), 949-964
|
2016 |
Modeling of impregnation in the pultrusion of thermoplastic composites
H Ghorbani, M Golzar, AH Behravesh
Journal of Science and Technology of Composites 3 (1), 31-42
|
2016 |
Experimental investigation on mechanical properties of extruded foamed PVC‐wood
composites reinforced with continuous glass fibers
M Kargar, AH Behravesh, H Mohammad Taheri
Polymer Composites 37 (6), 1674-1680
|
2016 |
Investigation of the effect of processing temperature on the elastic and
viscoelastic properties of PVC/fiberglass composite laminates
V Zal, H Moslemi Naeini, AR Bahramian, H Abdollahi, AH Behravesh
Modares Mechanical Engineering 15 (11), 9-16
|
2016 |
Assessment of defect detection in wood?plastic composites via shearography
method
M Barmouz, AH Behravesh, F Reshadi, N Soltani
Journal of Thermoplastic Composite Materials 29 (1), 28-36
|
2016 |
Effect of temperature on the fracture mechanism of wood?plastic composites
in situ
F Alavi, AH Behravesh, M Mirzaei
Journal of Thermoplastic Composite Materials 29 (1), 3-15
|
2015 |
Modeling tensile properties of hybrid wood-polyethylene composite reinforced
by unidirectional glass fiber
A Zolfaghari, AH Behravesh
Modares Mechanical Engineering 15 (9), 298-304
|
2015 |
Mixed-mode cohesive zone modeling and damage prediction of irregular-shaped
interfaces in wood?plastic composites
F Alavi, AH Behravesh, M Mirzaei
Composite Interfaces 22 (7), 651-662
|
2015 |
Investigation of thermoplastic pultrusion for tubular product production
using prepregs
M Tutunchi, M Golzar, AH Behravesh
Journal of Science and Technology of Composites 2 (1), 23-32
|
2015 |
Comparison of mechanical properties of wood?plastic composites reinforced
with continuous and noncontinuous glass fibers
A Zolfaghari, AH Behravesh, P Shahi
Journal of Thermoplastic Composite Materials 28 (6), 791-805
|
2014 |
Fracture Mechanism of Wood‐Plastic Composites (WPCS): Observation and Analysis
F Alavi, AH Behravesh, M Mirzaei
Lignocellulosic Polymer Composites: Processing, Characterization, and
?
|
2014 |
Evaluation of corrugated composite beam deflection by shape memory alloy
wire.
M Ansari, M Golzar, AH Behravesh
Modares Mechanical Engineering 14 (8)
|
2014 |
Effect of polymeric matrix melt flow index in reprocessing extruded wood?plastic
composites
MT Sarabi, AH Behravesh, P Shahi, Y Daryabari
Journal of Thermoplastic Composite Materials 27 (7), 881-894
|
2014 |
Visualization of foaming phenomena in thermoplastic injection molding process
A Ahmadzai, AH Behravesh, MT Sarabi, P Shahi
Journal of Cellular Plastics 50 (3), 279-300
|
2014 |
Experimental studies of training stress effect on NiTi SMA performance in
higher and lower stress than training stress
M Ansari, M Golzar, AH Behravesh
Modares Mechanical Engineering 13 (10), 14-24
|
2014 |
Journal of Thermoplastic
M Barmouz, AH Behravesh, F Reshadi, N Soltani
|
2014 |
Bulk density reduction of injection molded thermoplastic foams via a mold
design approach
AZ Ahmadzai, AH Behravesh
Cellular Polymers 33 (1), 21-42
|
2013 |
Continuous glass fiber reinforced wood plastic composite in extrusion process:
Mechanical properties
A Zolfaghari, AH Behravesh, A Adli
Materials & Design 51, 701-708
|
2013 |
A novel approach in mold design in regards to weight reduction of foam injection
molded parts
AZ Ahmadzai, AH Behravesh, P Shahi
Cellular polymers 32 (5), 279-304
|
2013 |
Procedure effect on the physical and mechanical properties of the extruded
wood plastic composites
M TabkhPaz, AH Behravesh, P Shahi, A Zolfaghari
Polymer composites 34 (8), 1349-1356
|
2013 |
An experimental investigation on surface quality and water absorption of
extruded wood?plastic composite
E Soury, AH Behravesh, NJ Jam, A Haghtalab
Journal of Thermoplastic Composite Materials 26 (5), 680-698
|
2013 |
In-situ observation of fracture mechanism of wood?plastic composites in
tension
F Alavi, AH Behravesh, M Mirzaei
Composite Interfaces 20 (3), 211-220
|
2013 |
Research Article On the Effect of Unit-Cell Parameters in Predicting the
Elastic Response of Wood-Plastic Composites
F Alavi, AH Behravesh, AS Milani, D Karimi
|
2013 |
Re-extrusion of wood polymer composites and its effects
M TabkhPaz, AH Behravesh, P Shahi, A Zolfaghari
SPE Plastics Research Online
|
2013 |
On the effect of unit-cell parameters in predicting the elastic response
of wood-plastic composites
F Alavi, AH Behravesh, AS Milani, D Karimi
Journal of Engineering 2013
|
2013 |
Continuous glass fiber reinforced wood plastic composite in extrusion process:
Feasibility and processing
A Zolfaghari, AH Behravesh, A Adli, MTP Sarabi
Journal of Reinforced Plastics and Composites 32 (1), 52-60
|
2012 |
Rheological investigation of wood-polypropylene composites in rotational
plate rheometer
E Soury, AH Behravesh, GM Rizvi, NJ Jam
Journal of Polymers and the Environment 20, 998-1006
|
2012 |
Mathematical and experimental study on flow of wood plastic composite to
acquire its constitutive equation
M Golzar, NJ Jam, AH Behravesh
Journal of Reinforced Plastics and Composites 31 (11), 749-757
|
2012 |
Experimental investigation on reprocessing of extruded wood flour/HDPE composites
P Shahi, AH Behravesh, SY Daryabari, M Lotfi
Polymer Composites 33 (5), 753-763
|
2012 |
Reprocessing of extruded wood-plastic composites; mechanical properties
MTP Sarabi, AH Behravesh, P Shahi, E Soury
Journal of Biobased Materials and Bioenergy 6 (2), 221-229
|
2012 |
Journal of Thermoplastic
MT Sarabi, AH Behravesh, P Shahi, Y Daryabari
|
2012 |
An experimental investigation on surface quality extruded wood-polypropylene
composite
E Soury, AH Behravesh, NJ Jam, A Haghtalab
Advanced Materials Research 428, 89-93
|
2011 |
Effect of processing parameters on water penetration in water assisted injection
molding of ABS
AZ Ahmadzai, AH Behravesh
Polimery 56 (3), 232-239
|
2011 |
Comparison of the Folding Behaviour in the Empty and Foam‐Filled Honeycombs
via Drop Hammer Tests
A Niknejad, GH Liaghat, HM Naeini, AH Behravesh
AIP Conference Proceedings 1315 (1), 15-20
|
2011 |
Journal of Thermoplastic
E Soury, AH Behravesh, NJ Jam, A Haghtalab
|
2011 |
Theoretical and experimental studies of the instantaneous folding force
of the polyurethane foam-filled square honeycombs
A Niknejad, GH Liaghat, HM Naeini, AH Behravesh
Materials & Design 32 (1), 69-75
|
2010 |
Theoretical Calculation of the Instantaneous Folding Force in a Single-Cell
Square Column under Axial Loading
A Niknejad, GH Liaghat, H Moslemi Naeini, AH Behravesh
Modares Mechanical Engineering 10 (3), 21-30
|
2010 |
Design, optimization, and manufacturing of a multiple‐thickness profile
extrusion die with a cross flow
A Rezaei Shahreza, AH Behravesh, M Bakhshi Jooybari, E Soury
Polymer Engineering & Science 50 (12), 2417-2424
|
2010 |
A theoretical formula for predicting the instantaneous folding force of
the first fold in a single cell hexagonal honeycomb under axial loading
A Niknejad, GH Liaghat, H Moslemi Naeini, AH Behravesh
Proceedings of the Institution of Mechanical Engineers, Part C: Journal
of ?
|
2010 |
A Chalange to the production of wood plastic granules with higher mechanical
performance
P Shahi, AH Behravesh, SY Daryabari, M Lotfi
PPS Reginonal Meeting, Istanbul
|
2010 |
Experimental and theoretical investigation of the first fold creation in
thin walled columns
A Niknejad, GH Liaghat, HM Naeini, AH Behravesh
Acta Mechanica Solida Sinica 23 (4), 353-360
|
2010 |
Visualization of bubble dynamics in foam injection molding
M Mahmoodi, AH Behravesh, SAM Rezavand, A Pashaei
Journal of applied polymer science 116 (6), 3346-3355
|
2010 |
Formation and characterization of polyethylene blends for autoclave‐based
expanded‐bead foams
AH Behravesh, CB Park, EK Lee
Polymer Engineering & Science 50 (6), 1161-1167
|
2010 |
Theoretical and experimental study on die pressure prediction in extrusion
of wood-plastic composite
AH Behravesh, E Shakouri, A Zolfaghari, M Golzar
Journal of composite materials 44 (11), 1293-1304
|
2010 |
ANTEC 2009. Proceedings of the 67th SPE Annual Technical Conference held
Chicago, Il., 22nd-24th June 2009 Editor (s): SPE Brookfield, Ct., SPE:
Characterization of ?
AH Behravesh, CB Park
Cellular Polymers 29 (3), 189-191
|
2010 |
Cellular Polymers: Experimental study on microstructural, surface hardness
and flexural strength of injection molded microcellular foamed parts
SAM Rezavand, AH Behravesh, M Mahmoodi, P Shahi
Cellular Polymers 29 (2), 130-131
|
2010 |
Theoretical and visual study of bubble dynamics in foam injection molding
M Mahmoodi, AH Behravesh, SAM Rezavand, M Golzar
Polymer Engineering & Science 50 (3), 561-569
|
2010 |
Flow balancing in die design of wood flour/HDPE composite extrusion profiles
with consideration of rheological effect
A Zolfaghari, AH Behravesh, E Shakouri, E Soury
Polymer Engineering & Science 50 (3), 543-549
|
2010 |
Experimental investigation of injection molding of wood/plastics composites
AH Behravesh, A Zohdi Aghdam, E Soury
Journal of reinforced plastics and composites 29 (3), 456-465
|
2010 |
Flow Balancing in Die Design of Wood Flour
A ZOLFAGHARI, AH BEHRAVESH, E SHAKOURI, E SOURY
Polymer engineering and science 50 (3), 5171-5177
|
2010 |
A STUDY ON THE EFFECT OF WATER ASSISTED INJECTION MOLDING PROCESS PARAMETERS
OF ABS AND PP BY EXPERIMENTAL DESIGN OVERALL EVALUATION CRITERIA (OEC)
T AZDAST, Z MOHAMMADIAN, AH BEHRAVESH, A AHMADZAI
JOURNAL OF MODERN PROCESSES IN MANUFACTURING AND PRODUCTION (JOURNAL
OF ?
|
2010 |
Investigation of the folding angle variations during the folding progress
in the columns
A Niknejad, GH Liaghat, H Moslemi Naeini, AH Behravesh
Trends in Applied Sciences Research 5 (1), 56-63
|
2010 |
Thermal conductivity of microcellular thermoplastic injection molded parts
with various microstructures
SAM Rezavand, AH Behravesh, P Shahi
Proceedings of the Polymer Processing Society 26th Regional Meeting,
20-23
|
2009 |
Design, optimization and manufacturing of wood?plastic composite pallet
E Soury, AH Behravesh, ER Esfahani, A Zolfaghari
Materials & Design 30 (10), 4183-4191
|
2009 |
Journal of Thermoplastic
E Shakouri, AH Behravesh, A Zolfaghari, M Golzar
Journal of Thermoplastic Composite Materials 22, 605
|
2009 |
Experimental study on microstructural, surface hardness and flexural strength
of injection molded microcellular foamed parts
SAM Rezavand, AH Behravesh, M Mahmoodi, P Shahi
Cellular polymers 28 (6), 405-428
|
2009 |
Effect of Die Pressure on Mechanical Properties of Wood?Plastic Composite
in Extrusion Process
E Shakouri, AH Behravesh, A Zolfaghari, M Golzar
Journal of Thermoplastic Composite Materials 22 (6), 605-616
|
2009 |
Flow Balance of an Extrusion Die for Production of a U-Shaped Profile
A Zolfaghari, A Behravesh
ADMT Journal 2 (4)
|
2009 |
Extrusion foam coating of coaxial cables using butane as physical blowing
agent
MN Marvian, AH Behravesh, M Mahmoodi, M Golzar
Cellular polymers 28 (5), 303-323
|
2009 |
Investigation of Process Parameters, Gate Position and its Shape Effect
on Dimensional Accuracy of Injected Plastic Part
P Shahi, AH Behravesh, B Arezou, M Mahmoudi
ADMT Journal 2 (4)
|
2009 |
An innovative method of die design and evaluation of flow balance for thermoplastics
extrusion profiles
A Zolfaghari, AH Behravesh, E Shakouri, E Soury
Polymer Engineering & Science 49 (9), 1793-1799
|
2009 |
Design and manufacture of an extrusion die for wood?plastic composite
E Soury, AH Behravesh, HG Nasrabadi, A Zolfaghari
Journal of reinforced plastics and composites 28 (12), 1433-1439
|
2009 |
Experimental investigation of the maximum axial force in the folding process
of aluminum square columns
A Niknejad, GH Liaghat, AH Behravesh, H Moslemi Naeini
International conference on manufacturing systems engineering, Rome,
Italy
|
2009 |
Challenge to the production of fine wood-plastic injection molded composites
NJ Jam, AH Behravesh
Journal of reinforced plastics and composites 28 (1), 73-82
|
2009 |
Extrusion Foam Coating of Coaxial Cables using Butane as Physical Blowing
Agent 303
MN Marvian, AH Behravesh, M Mahmoodi, M Golzar, DA King, J Walker, ...
Cellular Polymers 28 (5)
|
2009 |
Experimental Study on Microstructural, Surface Hardness and Flexural Strength
of Injection Molded Microcellular Foamed Parts-Dept. of Mechanical Engineering,
Tarbiat Modares ?
SA Mohammad Rezavand, AH Behravesh, M Mahmoodi, P Shahi
Cellular Polymers 28 (6), 405
|
2009 |
An experimental investigation on water penetration in the process of water
assisted injection molding of polypropylene
AZ Ahmadzai, AHB Vesh
Polimery 54 (7-8), 564-572
|
2009 |
Challenge to the Production of Fine Wood?Plastic Injection Molded Composites
N Jafarian Jam, A Hossein Behravesh
Journal of Reinforced Plastics and Composites 28 (1), 73-82
|
2008 |
An analytical study of constrained shrinkage of injection molded semi-crystalline
plastic parts
T Azdast, AH Behravesh
Polymer-Plastics Technology and Engineering 47 (12), 1265-1272
|
2008 |
Theoretical investigation of the instantaneous folding force during the
first fold creation in a square column
A Niknejad, GH Liaghat, AH Behravesh, HM Naeini
International conference on applied mechanics and mechanical engineering
?
|
2008 |
Investigation on microstructure and production of coaxial cable foam insulation
using butane gas
M Nazri, AH Behravesh, P Shahi
ADMT Journal 2 (1)
|
2008 |
Visualization of the flow history contours at the cross‐section of a weld‐line
in an injected molded part
S Fathi, AH Behravesh
Journal of applied polymer science 109 (1), 412-417
|
2008 |
Visualization analysis of flow behavior during weld-line formation in injection
molding process
S Fathi, AH Behravesh
Polymer-Plastics Technology and Engineering 47 (7), 666-672
|
2008 |
Real‐time measurement of flow front kinematics using quantitative visualization
in injection molding process
S Fathi, AH Behravesh
Polymer Engineering & Science 48 (3), 598-605
|
2008 |
AN EXPERIMENTAL STUDY OF THE EFFECT OF INJECTION PRESSURE AND MOLD TEMPERATURE
ON THE RELATIVE DENSITY OF THE MICROCELLULAR INJECTION MOLDED PARTS
SAM REZAVAND, AH BEHRAVESH, M MAHMOODI
ANNUAL MANUFACTURING CONFERENCE OF IRAN
|
2008 |
Numerical simulation and experimental validation of residual stress induced
constrained shrinkage of injection molded parts
T Azdast, AH Behravesh, K Mazaheri
Polimery 53 (4), 304-310
|
2008 |
Extrusion foam coating of coaxial cables using chemical blowing agent
MN Marvian, AH Behravesh, M Golzar
Cellular polymers 27 (1), 27-41
|
2007 |
Flow behavior of HDPE-fine wood particles composites
NJ Jam, AH Behravesh
Journal of Thermoplastic Composite Materials 20 (5), 439-451
|
2007 |
Visualization of in‐mold shrinkage in injection molding process
S Fathi, AH Behravesh
Polymer Engineering & Science 47 (5), 750-756
|
2007 |
An experimental investigation on dimensional stability of injected wax patterns
of gas turbine blades
SAM Rezavand, AH Behravesh
Journal of materials processing technology 182 (1-3), 580-587
|
2007 |
The effect of pressure drop rate on the microstructures of unfilled and
glass-filled abs microcellular foams
M MAHMOUDI, AH BEHRAVESH
IRANIAN POLYMER JOURNAL (ENGLISH) 16 (12), 839-849
|
2006 |
Experimental study on filling stage of microcellular injection molding process
AH Behravesh, M Rajabpour
Cellular polymers 25 (2), 85-98
|
2006 |
Novel Poly (N-substituted urethane): 1. Synthesis and Characterization of
Liquid Crystalline Polyurethanes Pendant with Biphenyl Mesogenic Unit
K Kazemi Beydokhti, AH Behravesh, T Azdast
IRANIAN POLYMER JOURNAL 15 (7), 555
|
2006 |
An experimental study on mechanical and microstructural properties of microcellular
foams of ABS composites
BK KAZEMI, AH BEHRAVESH, T Azdast
IRANIAN POLYMER JOURNAL (ENGLISH) 15 (773), 555-567
|
2005 |
AN EXPERIMENTAL STUDY ON MECHANICAL AND STRUCTURAL PROPERTIES OF BATCH-PROCESSED
INICROCELLULAR ABS
BK KAZEMI, AH BEHRAVESH, T AZDAST
AMIRKABIR 16 (62), 57-68
|
2003 |
SIMULATION AND EXPERIMENTAL ANALYSIS OF WARPAGE IN INJECTED MOLDED PLASTIC
PARTS
AH BEHRAVESH, M MOALEMI
MODARES TECHNICAL AND ENGINEERING
|
2000 |
Properties Evaluation of Polyurethane Sandwich Panels with Plastic and Aluminum
Skins: Thermal Insulation (984)
AH Behravesh, MM Moghaddam, H Jaani
TECHNICAL PAPERS OF THE ANNUAL TECHNICAL CONFERENCE-SOCIETY OF PLASTICS
?
|
2000 |
An Approach to Robust H~□ Control of Flexible Joint Robots
MM Moghaddam, AH Behravesh
INTERNATIONAL SYMPOSIUM ON ROBOTICS 31, 138-143
|
1998 |
Low density microcellular foam processing in extrusion using CO2
CB Park, AH Behravesh, RD Venter
Polymer Engineering & Science 38 (11), 1812-1823
|
1998 |
Extrusion processing of low-density microcellular foams
AH Behravesh
Department of Mechanical and Industrial Engineering, University of Toronto
|
1998 |
Approach to the production of low-density, microcellular foams in extrusion
AH Behravesh, CB Park, RD Venter
TECHNICAL PAPERS OF THE ANNUAL TECHNICAL CONFERENCE-SOCIETY OF PLASTICS
?
|
1998 |
Challenge to the production of low-density, fine-cell HDPE foams using CO2
AH Behravesh, CB Park, RD Venter
Cellular polymers 17 (5), 309-326
|
1997 |
A strategy for the suppression of cell coalescence in the extrusion of microcellular
high-impact polystyrene foams
CB Park, AH Behravesh, RD Venter
|
1996 |
Extrusion of polypropylene foams with hydrocerol and isopentane
AH Behravesh, CB Park, LK Cheung, RD Venter
Journal of Vinyl and Additive Technology 2 (4), 349-357
|
1996 |
MICROCELLULAR HIPS FOAMS USING CO
AH Behravesh, CB Park, RD Venter
Advanced Materials: Development, Characterization, Processing, and ?
|
1996 |
Extrusion of low-density microcellular hips foams using CO2
AH Behravesh, CB Park, RD Venter
MD-76, Cellular and Microcellular Materials, V Kumar, KA Seeler (Eds),
47-63
|
1996 |
Effect of branched structure on the cell morphology of extruded polypropylene
foams I: Cell nucleation
LK Cheung, CB Park, AH Behravesh
TECHNICAL PAPERS OF THE ANNUAL TECHNICAL CONFERENCE-SOCIETY OF PLASTICS
?
|
1996 |
Effective suppression of cell coalescence during chapping in the extrusion
of microcellular HIPS foams
AH Behravesh, CB Park, M Pan, RD Venter
Polymer Preprints(USA) 37 (2), 767-768
|
1995 |
Mechanical and microstructural properties of low carbon equivalent austempered
ductile iron.
AH Behravesh
|
|
Design of a Lateral Die for Plastic Sheet Extrusion
H Validi, RA Tafti, AH Behravesh
|
|
Investigation of the Shape Memory Effect in Shape memory Springs of Poly
Lactic Acid Alloy Type
A Siahsarani, AH Behravesh
|
|
Experimental Study on the Surface Hardness and Flexural Strength of Microcellular
Injection Molded Parts
SAM Rezavand, AH Behravesh, M Mahmoodi, P Shahi
|
|
Flow Behavior Assessment and Mathematical Approach to Acquire Constitutive
Equation of Wood-Plastic Composites
NJ JAM, M GOLZAR, AH BEHRAVESH
|
|
Investigation of cured shapes of trapezoidal corrugated composite skins
M Ansari, M Golzar, MM Kasaei, P Ghabezi, AH Behravesh
|
|
2D and 3D Morphological Analysis of PE Foams Using Micro CT X-Ray Scanner
P Shahi, G Rizvi, R Pop-Iliev, AH Behravesh
|
|
REINFORCING OF WOOD PLASTIC COMPOSITES BY CONTINUOUS GLASS FIBERS IN EXTRUSION
PROCESS
A ZOLFAGHARI, AH BEHRAVESH, A ADLI, M TABKHPAZ
|
|
Investigation of the Folding Angle Variations During The Folding Progress
in the Columns
ANGHLHM Naeini, AH Behravesh
|
|
Investigation on Effect of Wood Content on Recycle Ability of Extruded Wood-Plastic
Composites
MTP Sarabi, AH Behravesh, P Shahi, A Zolfaghari
|
|
Experimental Study on the Effect of Melt Flow Index on Properties of Virgin
and Reprocessed Wood-HDPE Composites
MTP Sarabi, AH Behravesh, P Shahi, E Soury
|
|
Production of Coaxial Cables with Extrusion Foaming using Butane as Blowing
Agent
AH Behravesh, MN Marvian, P Shahi
|
|
Processing Considerations in the Recycling of Wood-Plastic Composites
P Shahi, AH Behravesh
|
|
Visualization of Talc Amount Effect on Expansion Behaviour of HMS PP Extruded
Foam
T Azdast, CB Park, AH Behravesh, EK Lee, KM Lee
|
|
Visualization of CO2 Content Effect on Expansion Behaviour of HMS PP Extruded
Foam
T Azdast, CB Park, AH Behravesh, EK Lee, KM Lee
|