Year |
Title |
2023 |
Shape Memory Properties of Additive Manufactured Continuous Metallic Wire-Reinforced PLA with Electrothermal Activation
AH Behraves, SK Hedayati, A Bakhtiyari, D Akbari, G Rizvi
|
2023 |
Shape Memory Properties of Additive Manufactured Continuous Metallic Wire-Reinforced PLA with Electrothermal Activation
MG Sarcheshmeh, AH Behraves, SK Hedayati, A Bakhtiyari, D Akbari, ...
Preprints
|
2023 |
Ultrasonic Welding of Surface Pretreated GFRP Composites Using PMMA Interlayer with Addition of Nanoparticles
S Mirzaahmadi, D Akbari, I Ahadzadeh, SA Hosseini-Yazdi
Transactions of the Indian Institute of Metals, 1-10
|
2023 |
Assessing the Effect of Infill Percentage on Detectability of Defects Created
in Polymer Parts Printed by the Fused Deposition Modeling (FDM) Using Sheared
Laser Interferometry
M Tizmaghz Nejad, D Akbari, M Hasani, F Poyan Moghadam
Experimental Techniques, 1-9
|
2023 |
Nondestructive Testing of Ultrasonic Welded Polymer-Based Composites Using
Active Thermography Method
H Tirband, D Akbari, PF Kalajahi, M Mohammadian
|
2023 |
Defect detection by laser shear interferometry based on the thermal response
of materials with vibratory loading
N Saberi Nasrabad, D Akbari, M Karfi, S Ghobadi
Proceedings of the Institution of Mechanical Engineers, Part B: Journal
of ?
|
2023 |
Non-destructive Evaluation of Artificial Defects in FDM Printed Parts Using
Pulse Thermography
M Hasani, D AKBARI, AH BEHRAVESH, KP Faraji
AEROSPACE MECHANICS JOURNAL 18 (470002028), 77-87
|
2022 |
Nondestructive inspection of gas turbine blades by active thermography using
different fluids
M Mohammadian, D Akbari, M Farahani, P Faraji Kalajahi
Proceedings of the Institution of Mechanical Engineers, Part B: Journal
of ?
|
2022 |
Investigation of the effect of surface preparation on the quality of adhesive
bonds of thermoset polymers reinforced with glass fibers
D Akbari, M Sadeh
Journal of Welding Science and Technology of Iran 8 (1), 113-122
|
2022 |
Defect detection by laser shear interferometry based on the thermal response
of materials with vibratory loading
NS Nasrabad, D Akbari, M Karfi, S Ghobadi
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL
OF ?
|
2022 |
Investigation of the Residual Strains in the Continuous Fiber Reinforced
Specimens of the Fused Deposition Modeling Process Using Digital Image Correlation
Method
F Azadi, D Akbari
Modares Mechanical Engineering 22 (7), 441-449
|
2022 |
Nondestructive measurement of residual stress in welded steel parts using
digital image correlation method
P Ghasemi Tamami, D Akbari
Iranian Journal of Manufacturing Engineering 9 (3), 18-28
|
2022 |
Measurement of Residual Stress in Composites Using Central Hole Drilling
and Digital Image Correlation Methods
P Ghasemi Tamami, D Akbari, F Azadi
Journal of Modern Processes in Manufacturing and Production 11 (2),
49-60
|
2022 |
Measurement of Residual Stress in Polymers by Digital Image Correlation
Method
F Azadi, D Akbari
Journal of Mechanical Engineering
|
2022 |
Application of lock-in shearography in non-destructive testing of planar
defects
S Sabbaghi Farshi, D Akbari
Iranian Journal of Manufacturing Engineering 9 (1), 1-9
|
2022 |
Evaluation of the defects in the underload polymers using shearography method
by thermal excitation
E Aghajafari, D Akbari
Journal of Mechanical Engineering 51 (4), 1-9
|
2022 |
Application of Electrical Stimulation for Inspection of Composite Materials
in The Thermography Method
A Ansari, D Akbari
NONDESTRUCTIVE TESTING TECHNOLOGY 3 (11002249), 2-12
|
2022 |
Nondestructive Inspection of Agglomeration Defects in Polymer-Based Nano-Composites
Using Laser Interferometry Method
NM Tizmaghz, D AKBARI, M MOHAMMADIAN
NONDESTRUCTIVE TESTING TECHNOLOGY 3 (11002249), 52-63
|
2021 |
Capability of Digital Shearography in Crack Defect Inspection
M Tiz Maghz Nejad, D Akbari, S Ghobadi
NDT Technology 2 (8), 41-61
|
2021 |
Non-destructive evaluation of internal cracks in glass fiber-reinforced
polymers using digital shearing interferometry
F Banakar, D Akbari
Amirkabir Journal of Mechanical Engineering 53 (6 (Special Issue)),
4063-4078
|
2021 |
Nondestructive Evaluation of Gas Turbine Blade Cooling Holes Blockage by
Thermography
AM Kolagar, M Cheraghzadeh, D Akbari, M Farahani
NDT Technology 2 (6), 46-52
|
2021 |
Assessment of delamination growth due to matrix cracking in hybrid Glass-Kevlar
composite laminates using experimental, numerical and analytical methods
A Farrokhabadi, S Neyestani, D Akbari, R Sarkhosh
Engineering Fracture Mechanics 247, 107691
|
2021 |
Investigation on the effects of the joint type on the driven out bead in
the welded pipes produced by high-frequency induction welding
M Ghaffarpour, D Akbari, HM Naeini
Proceedings of the Institution of Mechanical Engineers, Part L: Journal
of ?
|
2020 |
Application of vibration loading method for non-destructive testing of polymer
Material by Means of Laser Shear Interferometry
N Saberi NasrAbad, D Akbari, MR Karafi
Journal of Solid and Fluid Mechanics 10 (4), 15-26
|
2020 |
Ultrasonic welding of thermoset matrix composites reinforced with glass
fibers using a co-cured retaining layer
A JabariRad, D Akbari, M Golzar
Journal of Welding Science and Technology of Iran 6 (2), 137-144
|
2020 |
Non-destructive measurement of internal defects using shear laser interferometry
method
S Sabbaghi Farshi, D Akbari, N Saberi Nasrabad
Iranian Journal of Manufacturing Engineering 7 (1), 45-52
|
2020 |
A Review on Non-Destructive Identification of Defects in Fiber Reinforced
Polymeric base Composites
S Mirzaahmadi, D Akbari
NDT Technology 2 (5), 14-29
|
2020 |
Detection of Sub-Surface Defects in Polymer Materials Using Digital Shearography
Method with Different Loading and Set-up Parameters
MT Nejad, D Akbari, H Tirband
Proceedings of the 6th Iranian International NDT Conference, Tehran,
Iran, 17-18
|
2019 |
Optimization of the Spot Weld Locations for Increasing the Joint Strength
of the Welded Plates
D Manafi, D Akbari
Amirkabir Journal of Mechanical Engineering 51 (5), 1097-1105
|
2019 |
Application of laser shearing interferometry in non-destructive inspection
and size estimation of plane defects
S Sabbaghi Farshi, D Akbari
Journal of Solid and Fluid Mechanics 9 (4), 1-14
|
2019 |
Application of pre-heating in the reduction of distortion in the dissimilar
joints welding SS type 304 and carbon steel A106-B
M Charkhi, G Faghani, D Akbari, M Shalvandi
Iranian Journal of Manufacturing Engineering 6 (6), 51-63
|
2019 |
Friction stir weld of AZ91 magnesium alloy with and without nano-SiC particle
M Farzami, M Farahani, D Akbari, M Tabasi
JOM 71, 4171-4179
|
2019 |
Improvement of the joint quality in the high-frequency induction welding
of pipes by edge modification
M Ghaffarpour, D Akbari, H Moslemi Naeeni, S Ghanbari
Welding in the World 63, 1561-1572
|
2019 |
Geometry Effects of Asymmetrical Channel Sections on Common Defects in the
Roll Forming Process
Y Tajik, H Moslemi Naeini, R Azizi Tafti, D Akbari, MM Kasaei
Journal Of Applied and Computational Sciences in Mechanics 30 (2), 1-16
|
2019 |
The influences of the cyclic force magnitude and frequency on the effectiveness
of the vibratory stress relief process on a butt welded connection
SM Ebrahimi, M Farahani, D Akbari
The International Journal of Advanced Manufacturing Technology 102,
2147-2158
|
2019 |
Effect of forming parameters on edge wrinkling in cold roll forming of wide
profiles
H Mohammdi Najafabadi, H Moslemi Naeini, R Safdarian, MM Kasaei, ...
The International Journal of Advanced Manufacturing Technology 101,
181-194
|
2019 |
Experimental and numerical investigation of the effects of the pre-heating
in the modification of residual stresses in the repair welding process
M Charkhi, D Akbari
International Journal of Pressure Vessels and Piping 171, 79-91
|
2019 |
Investigation of digital shearography for the defect detection of different
materials
F Banakar, D Akbari
NDT Technology 2 (3), 8-22
|
2019 |
Non-destructive residual stress measurement using digital image correlation
method
P Ghasemi Tamami, D Akbari, F Azadi
NDT Technology 2 (3), 50-58
|
2018 |
Numerical and experimental study of the edge wrinkling defect of cold roll
forming of wide profiles
H Mohammadi Najafabadi, H Moslemi Naeini, R Safdarian, D Akbari, ...
Iranian Journal of Manufacturing Engineering 5 (1), 28-36
|
2018 |
Evaluation and measurement of the residual stresses in stainless steel pipes
and investigation of the effects of wall thickness on the stresses distribution
M Charkhi, D Akbari
IRANIAN JOURNAL OF MANUFACTURING ENGINEERING 4 (2), 61-68
|
2018 |
Visualization of Flow & Void In pultrusion Process of thermoplastic composites
A Dadou, M Golzar, D Akbari, MH Mohamadipour
Journal of Science and Technology of Composites 4 (4), 453-463
|
2018 |
Application of pre-heating in the reduction of residual stress in the repair
welds of steel pipes
D Akbari
Modares Mechanical Engineering 17 (12), 5-10
|
2018 |
Non-destructive Investigation of Modulated Infrared Thermography in Evaluation
of Subsurface Defects in Polymer Matrix Composites
K Jamali, D Akbari, M Golzar
MODARES MECHANICAL ENGINEERING,[online] 18 (2), 225-233
|
2017 |
Analysis of laser interfrometry parameters in the evaluation of defects
in the polymer matrix composites
D Akbari, H Asemani
Modares Mechanical Engineering 17 (9), 372-380
|
2017 |
Effect of edge preparation on residual stress of welding in dissimilar joints
D Akbari
Modares Mechanical Engineering 17 (7), 307-315
|
2017 |
An Investigation of the groove shape preparation effects in the high frequency
induction welding of the metal pipes
S Ghabari, D Akbari, H Moslemi Naeeni
Modares Mechanical Engineering 16 (12), 722-732
|
2016 |
Investigation of the e ects of the weld groove shape on the residual stress
formation in the butt-welded plates
M Farahani, S Hakkak Zargar, D Akbari
Scientia Iranica 23 (5), 2230-2237
|
2015 |
Evaluation of sub-surface cracks in polymer matrix composites with laser
interferometric method
M Mohamadi, D Akbari
International Journal of Manufacturing Engineering 2 (3), 11-23
|
2013 |
Aplication of digital shearography for non destructive testing of materials
with thermal loading
D Akbari, N Soltani, F Reshadi
Modares Mechanical Engineering 13 (4), 36-45
|
2013 |
Numerical and experimental investigation of defect detection in polymer
materials by means of digital shearography with thermal loading
D Akbari, N Soltani, M Farahani
Proceedings of the Institution of Mechanical Engineers, Part B: Journal
of ?
|
2013 |
Effect of residual stresses on crack behaviour in single edge bending specimens
M Farahani, I Sattari‐Far, D Akbari, R Alderliesten
Fatigue & Fracture of Engineering Materials & Structures 36 (2), 115-126
|
2013 |
DETERMINATION OF STRESS INTENSITY FACTORS FOR SLANT EDGE CRACKS BY MEANS
OF DIGITAL SHEAROGRAPHY
D Akbari, N Soltani, F Reshadi, A Ghazavizadeh
Int. J. of Appl. Math and Mech 9 (10), 74-89
|
2013 |
Investigation of Loading Parameters in Detection of Internal Cracks of Composite
Material with Digital Shearography
D Akbari, N Soltani
Applied Sciences Journal 6 (21), 531-532
|
2012 |
Numerical and experimental investigations of effects of residual stresses
on crack behavior in Aluminum 6082-T6
M Farahani, I Sattari-Far, D Akbari, R Alderliesten
Proceedings of the Institution of Mechanical Engineers, Part C: Journal
of ?
|
2012 |
Effects of the weld groove shape and geometry on residual stresses in dissimilar
butt-welded pipes
D Akbari, M Farahani, N Soltani
The Journal of Strain Analysis for Engineering Design 47 (2), 73-82
|
2009 |
Effect of the welding heat input on residual stresses in butt-welds of dissimilar
pipe joints
D Akbari, I Sattari-Far
International journal of pressure vessels and piping 86 (11), 769-776
|
|
Detection of Sub-Cracks in Polymeric Materials using Digital Shearography
Method with Thermal loading and Determination of Optimal parameters
MT Nejad, D Akbari, H Tirband
|
|
Non-Destructive Fem-Assisted Evaluation of Defect Depth in Cfrp Laminate
Using Lock-In Shearography
S Sabbaghi Farshi, D Akbari
Available at SSRN 4314784
|
|
Numerical and Experimental Investigation of the Effect of Parameters in
Shear Spinning Process of a Conic Sample
TB Bodaghi, D Akbari, HM Naeini
|
|
Application of Water Vapor Excitation in the Non-Destructive Evaluation
of Gas Turbine Blades by Active Thermography
M Mohammadian, D Akbari, MR Farahani, PF Kalajahi
|
|
Application of digi testing of materials
D Akbari, N Soltani, F Resh
|