Thesis Supervision
Ph.D.:
-
M. Mahboubkhah, Dynamic and Vibrational Analysis of a Stewart-Mechanism Based Machint Tool Table, 2008
-
S. Amini, Ultrasonic-Vibration Assisted Turning of Inconel738 and Udimet500 Super alloys, 2009
- M. Mehrara, Analytical and Experimental Investigation on the Roll Bending of Sheet Metal on the Rubber Pad, 2011
- H. Razavi, Analytical Modeling and Experimental Investigation of Ultrasonic Vibration Assited Oblique Turning, 2012
- H. Soleimanimehr, Modeling and Experimental Investigation of Workpiece's Springback in Vibration Assisted Turning, 2013
- D. Karimi, Development of Interpolation Algorithms for Free Form Surfaces and Avoidance of Singularity in Controlling the Hexapod Machine Tool Tables, 2013
M.Sc.:
-
P. Mirfakhraie, Computer Aided Design of a 500-ton mechanical press, Amir Kabir University of Technology, Mech. Eng. Dept., 1992
-
F. Fereshteh Saniee, Computer aided forging die design for asymmetrical components, Tarbiat Modares University, Mech. Eng. Dept., 1992
-
M. Bakhshi Jooybari, Computer aided forging die design for axisymmetrical components, Tarbiat Modares University, Mech. Eng. Dept., 1992
-
M. M. Rajabi, Computer aided design and simulation for deep drawing process, Amir Kabir University of Technology, Mech. Eng. Dept., 1994
-
H. Fadaeian, Application of slab method in CAD of forging dies for axisymmetric components, Amir Kabir University of Technology, Mech. Eng. Dept., 1994
-
V. Hajzavar, Computer aided design of forging and die for hot forging of rotational axes, Amir Kabir University of Technology, Mech. Eng. Dept., 1995
-
M. Ghatee, An investigation into the metal flow inside the closed dies for forging of axisymmetric components at the final stage of die filling, Amir Kabir University of Technology, Mech. Eng. Dept., 1995
-
M. Mehdinezhad, Design and modeling of an orbital forging machine, Amir Kabir University of Technology, Mech. Eng. Dept., 1995
-
H. Sharif Nasab, Development of hardening method for combine harvesting blades and design of the relevant manufacturing equipment, Tehran University, Acri. Mach. Eng., 1997 (consultant)
-
D. Ghanbarian, Design of production line for manufacture of combine harvesting blades, Tehran University, Acri. Mach. Eng., 1997 (consultant)
-
Gh. Kherad, An investigation into the motion profiles of forming tool in orbital forging process, Tarbiat Modares University, Mech. Eng. Dept., 1998
-
M. R. Ranjbar Omid, Continuous casting of nonferrous sections, Shahid Rajaie University, Mech. Eng. Dept., 2001
-
B. Jafari, Analytical and experimental investigation on Ti-6Al-4V lens-shape workpiece, Tarbiat Modares University, Mech. Eng. Dept., 2003
-
A. Kadkhodazadeh, Design and modeling of the structure of vertical turning machine by converting the structure of horizontal TN71 lathe and investigation on its stiffness and static stability, Tarbiat Modares University, Mech. Eng. Dept.,2004
-
M. A. Hoseini, Design and manufacture of hexapod table for a 3-axis CNC milling machine, Tarbiat Modares University, Mech. Eng. Dept., 2005
-
H. Farkhondehal, Kinematic design of hexapod machine tool and test with model, Tarbiat Modares University, Mech. Eng. Dept., 2005
-
V. Sanjabi, Design, simulation and error detection of guiding system of AGV, Tarbiat Modares University, Mech. Eng. Dept., 2006
-
M. Gholami, Design and manufacture of an automated guided vehicle, Tarbiat Modares University, Mech. Eng. Dept., 2006
-
S. E. Tabatabaie, Design and prototyping of the head of a rapid prototyping machine, Tarbiat Modares University, Mech. Eng. Dept., 2006
-
B. Sadeghi Ghomi, Design and manufacture of modular forging dies for axi-symmetric components, Tarbiat Modares University, Mech. Eng. Dept., 2007
-
E. Roohani Esfahani, Design and modeling of the structure of an electrochemical machine, Tarbiat Modares University, Mech. Eng. Dept., 2007
-
A. Mofidi Naieni, Determination and test of workspace and singularities of a hexapod machine, Tarbiat Modares University, Mech. Eng. Dept., 2007
-
D. Karimi, Design and manufacture of components and determination of motion strategy of machine tool's hexapod table, Tarbiat Modares University, Mech. Eng. Dept., 2007
-
H. Soleimanimehr, Design and manufacture of horn for ultrasonic vibration-assisted turning, Tarbiat Modares University, Mech. Eng. Dept., 2008
-
M. M. Agheli, Calibration of the table of hexapod machine tool, Tarbiat Modares University, Mech. Eng. Dept., 2009
-
M. Shankaei, Computer Aided Jigs and Fixture Design, Tarbiat Modares University, Mech. Eng. Dept., 2009
-
B. Gholamzadeh, An investigation on the temperature in ultrasonic-vibration assisted turning, Tarbiat Modares University, Mech. Eng. Dept., 2010
-
V. Hamdipoor, Generation of tool path for hexapod machine tools, Tarbiat Modares University, Mech. Eng. Dept., 2010
-
H. Jamshidi, An investigation on the friction force in ultrasonic-vibration assisted turning, Tarbiat Modares University, Mech. Eng. Dept., 2011
- A. R. Mohammadi, Application of function blocks in integrated computer aided fixture design, Tarbiat Modares University, Mech. Eng. Dept., 2011
- H. Parvaz, Development of automatic machining feature recognition module for a CAD/CAM integrated system, Tarbiat Modares University, Mech. Eng. Dept., 2011
- M. Budaghi, Verification of jigs and fixtures by using sensor, Tarbiat Modares University, Mech. Eng. Dept., 2012
- M. R. Chalak, Improvement of the Interpolation Functions and Tool Path Generation for Hexapod Machine Tools, Tarbiat Modares University, Mech. Eng. Dept.,2013
- M. J. Tajarri, Improvement of the Mechanical Design and Investigation of the Influence of Backlash on the Positioning Error in Hexapod Machine Tools, Tarbiat Modares University, Mech. Eng. Dept.,2013
B.Sc. Projects:
Thirteen Projects in Amir Kabir University of Technology in metal forming, and jigs and fixtures design
