MohammadJavad Nategh
Associate Professor
Speciality: Manufacturing Enginering
  • BS/BA: Mechanical Engineering
  • MS: Mechanical Engineering
  • PhD: Mechanical Engineering
  • Phone: 82884396
  • Fax: 82884396
  • Email: nategh@modares.ac.ir
    • Address: School of Mechanical Engineering, Tarbiat Modares University
  • Resume Download
 
Publications
Journal Papers
  1. D. T. Pham and M. J. Nategh, A Knowledge-Based Jig-and-Fixture Designer's Assistant, Int. J. Adv. Manuf. Technol., Vol. 4, pp 26-45, 1989
  2. D. T. Pham and M. J. Nategh, CAD of Devices for Gripping Tapered Components, ibid, Vol. 4, pp 369-383, 1989
  3. D. T. Pham and M. J. Nategh, Optimum Design of Gripper Jaws for Tapered Components, Robotica, Vol. 8, pp 223-230, 1989
  4. M. J. Nategh and T. A. Dean, A Concept for a Flexible Forging-Machining System (FFMS), Int. J. Mach. Tools Manufact., Vol. 30, No.1, pp 33-42, 1990
  5. M. J. Nategh and M. Bakhshi, AXIFORGE: A PC-Based Forging Design Program for Computer-Integrated Engineering Environments, Int. J. Computer Applications in Technology, Vol. 11, Nos 1/2, 1998
  6. M. J. Nategh, Badi'azzama'n Jazari, the Renowned Engineer of the Sixth/ Twelve Century, Waqf, Mirath-e Javidan, Vol. 4, Issues 3&4, pp 143-156, 1996 (in Persian) 
  7. M. J. Nategh, Provision of Low Cost Financing Facilities as an Effective State Means of Supporting Development of National Technology, Industry and Development, Vol. 3, Issue 16, pp 4-7, 1997 (in Persian)
  8. M. J. Nategh, An investigation on two manuscripts of Jazari's al-Heial, Nāmeh-ye Bahārestān, Vol. IV, No. 1-2, pp 301-306, 2004 (in Persian)
  9. M. J. Nategh and A. Kadkhodazadeh, Physical modeling of the structure of a vertical lathe and testing its stiffness, Modares Technical and Engineering J., No. 28, pp 47-56, 2007 (in Persian)
  10. M. M. Hoseini, M. J. Nategh and H. Farkhondehal, Statical analysis of force in the hexapod table of a CNC milling machine, Amirkabir Int. J. of Science and Technology, Vol. 18, No. 66-B, pp 1-7, 2007 (in Persian)
  11. M. J. Nategh and B. Jafari, Analytical and experimental investigations on influential parameters of superplastic forming of titanium based workpieces, J. Aerospace Science and Technology, JAST, Vol. 4, No. 2, pp 43-51, 2007
  12. S. Amini, H. Soleimanimehr, M. J. Nategh, A. Abdollah and M. H. Sadeghi, FEM analysis of ultrasonic-vibration-assisted turning and the vibratory tool, J. Materials Processing Technology, Vol. 201, pp 43-47, 2008
  13. M. J. Nategh and S. E. Tabatabaie, An enhanced methodicalapproach to machine tool design procedure, Proc. IMechE, Part B: J. Engineering Manufacture, Vol. 222, pp 309-318, 2008
  14. M. J. Nategh and B. Jafari, Experiments with a low-cost hot isothermal pressing machine developed for superplastic forming, J Materials Engineering and Performance, Vol. 17, pp 682-687, 2008
  15. M. Mahboubkhah, M. J. Nategh and S. Esmaeilzadeh Khadem, Vibration analysis of machine tool's hexapod table, Int. J. Advanced Manufacturing Technology, Vol. 38, pp 1236-1243, 2008
  16. Mahboubkhah, M. J. Nategh and S. Esmaeilzadeh Khadem, A comprehensive study on the free vibration of machine tool's hexapod table, Int. J. Advanced Manufacturing Technology, Vol. 40, pp 1239-1251, 2009
  17. Mahboubkhah, M. J. Nategh and S. Esmaeilzadeh Khadem, Inverse dynamic analysis of hexapod machine tooltable and comparative analysis of influential forces, Modares Technical and Engineering J., No. 37, pp 29-38, 2010 (in Persian)
  18. M. J. Nategh,Concurrent engineering planning on the basis of forward and backward effects of manufacturing processes, International journal of Production Research, Vol. 47, No. 18, pp 5161-5147, 2009
  19. S. Amini, M. J. Nategh and H. Soleimanimehr,  Application of design of experiments for modelling surface roughness in ultrasonic vibration turning, Proc. IMechE Vol. 223 Part B: J. Engineering Manufacture, pp 652-641, 2009
  20. M. J. Nategh and M. M. Agheli, A total solution to kinematic calibration of hexapod machine tools with a minimum number of measurement configurations and superior accuracies, International JournalofMachineTools&Manufacture, , Vol. 49, pp 1155-1164, 2009 
  21. M. J. Nategh, S. Amini, H. Soleimanimehr, M. H. Sadeghi and A. Abdollah, A machining force model developed for ultrasonic vibration-assisted turning through statistical analysis of influential parameters, Mechanical and Aerospace Engineering Journal, Vol. 4, No. 4, pp 83-91, 2009
  22. H. Soleimanjahi, M. J. Nategh, S. Fallahi, A Performance Appraisal of Neural Networks Developed for Response Prediction across Heterogeneous Domains, World Academy of Science, Engineering and Technology, Vol. 52, pp. 263-268, 2009
  23. D. Karimi, M. J. Nategh, A Study on the Quality of Hexapod Machine Tool's Workspace, International Journal of Aerospace and Mechanical Engineering, Vol. 4, No. 3, pp. 166-171, 2010
  24. M. M. Agheli, M. J. Nategh, Identifying the Kinematic Parameters of Hexapod Machine Tool, International Journal of Aerospace and Mechanical Engineering, Vol. 4, No. 3, pp. 149-154, 2010
  25. H. Soleimanimehr, M. J. Nategh, S. Amini, Modeling of Surface Roughness in Vibration Cutting by Artificial Neural Network, International Journal of Aerospace and Mechanical Engineering, Vol. 4, No. 3, pp. 160-155, 2010
  26. M. J. Nategh, S. Amini and H. Soleimanimehr, Modeling the Force, Surface Roughness and Cutting Temperature in Ultrasonic Vibration-Assisted Turning of Al7075, Advanced Materials Research, Vols. 83-86, pp 315-325, 2010
  27. H. Soleimanimehr, M. J. Nategh and S. Amini, Prediction of Machining Force and Surface Roughness in Ultrasonic Vibration-Assisted Turning Using Neural Networks, Advanced Materials Research, Vols. 83-86, pp 326-334, 2010
  28. M. Shankayi, M. J. Nategh, H. Soleimanimehr, Machining Jigs and Fixtures Planning with the Aid of Expert Systems, Manufacturing Technology, No. 3, pp 13-18, 2010 (in Persian)
  29. S. Amini, M. J. Nategh, A. Abdollah, An Investigation on the Machining Force in Ultrasonic-Vibration Assisted Turning of Al7075 Workpiece, Majlesi Journal of Mechanical Engineering, Vol. 3, No. 4, pp 43-51, 2010 (in Persian)
  30. M. Mehrara, M. J. Nategh, Analysis of Continuous Bending of Thin Plates in Rubber Pad Bending, Key Engineering Materials, Vol. 473, pp 145-150, 2011
  31. M. Mehrara, M. J. Nategh, Analytical-Numerical Solution Bending Problem of Thin Plates in Rubber Pad Bending, Key Engineering Materials, Vol. 473, pp 190-197, 2011
  32. H. Razavi, M. J. Nategh, A. Abdollah, H. Soleimanimehr, Analytical and Experimental Analysis of the Kinematics of Relative Motion between the Cutting Tool and Workpiece in Ultrasonic-Vibration Assisted Turning, Modares Mechanical Engineering, Vol. 11, No. 1, pp 89-101, 2011 (in Persian)
  33. H. Soleimanimehr1,a, M.J. Nategh2,b, S. Amini, Analysis of Diametrical Error of Machined Workpieces in Ultrasonic Vibration Assisted Turning, Advanced Materials Research, Vols. 264-265, pp 1079-1084, 2011
  34. Davoud Karimi and Mohammad Javad Nategh, “A Statistical Approach to the Forward Kinematics Nonlinearity Analysis of Gough-Stewart Mechanism,” Journal of Applied Mathematics, vol. 2011, Article ID 393072, 17 pages, 2011. doi:10.1155/2011/393072
  35. H. Soleimanimehr, M. J. Nategh, Machining Error due to Spring-back of Work-piece in Conventional and Ultrasonic-Vibration Assisted Turning, Modares Mechanical Engineering, Vol. 11, No. 3, pp 27-42, 2011 (in Persian)
  36. H. Parvaz, M. J. Nategh, Modeling the Hydrodynamic Lubrication Function of Scrapings in Machine Tool Slideways, Advanced Materials Research, Vol. 445, pp 1035-1040, 2012
  37. H. Parvaz, M. J. Nategh, A Multi-TAD Framework for Recognizing Machining Features Using Hint Based Recognition Alorithm, Advanced Materials Research, Vol. 445, pp 905-910, 2012
  38. H. Razavi, M. J. Nategh, H. Soleimanimehr, An Investigation of Lateral Surface Hardness and Related Cutting Forces in One-Directional Ultrasonic-Vibration Assisted Turning,Advanced Materials Research,Vol. 445, pp 1041-1046, 2012
  39. H. Soleimanimehr, M. J. Nategh, H. Jamshidi, Mechanistic Model of Workpiece Diametrical Error in Conventional and Ultrasonic Turning,Advanced Materials Research,Vol. 445, pp 911-916, 2012
  40. M. Mehrara, M. J. Nategh, H. M. Naeeni, Analytical solution to the elastic bendign of long and rectangular thin plate resting on rubber foundation, Mechanical Engineering Science, IMecE Part C, Vol. 226, pp 1186-1197, 2012
  41. M. Mehrara, M. J. Nategh, Analysis of the elastic and plastic roll bending of sheet metal on a rubber pad, Journal of Engineering Manufacture, IMecE Part B, Vol. 226, pp 722-732, 2012
  42. M. Mehrara, M. J. Nategh, Analysis of continuous sheet bending on elastic foundation, Journal of Engineering Manufacture, Mechanical and Aerospace Engineering Journal, Vol. 7, No. 2, pp 57-72, 2012 (in Persian)
  43. M. J. Nategh, H. Razavi, A. Abdullah, Analytical modeling and experimental investigation of ultrasonic-vibration assisted blique turning, partI: Kinematics analysis, International Journal of Mechanical Sciences,Vol. 63, pp 1-11, 2012
  44. H. Razavi, M. J. Nategh, A. Abdullah, Analytical modeling and experimental investigation of ultrasonic-vibration assisted blique turning, partII: Dynamics analysis, International Journal of Mechanical Sciences,Vol. 63, pp 12-25, 2012
  45. H. Razavi, M. J. Nategh, A. Abdullah, Analytical modeling and experimental investigation of ultrasonic-vibration assisted blique turning, partIII: Experimental Investigation, International Journal of Mechanical Sciences,Vol. 63, pp 26-36, 2012
  46. H. Jamshidi, M. J. Nategh, Theoretical and experimental investigation of the frictional behavior of the tool-chip interface in ultrasonic-vibration assisted turning, International journal of Machine Tools & Manufacture, Vol.65, pp 1-7, 2013
  47. S. Amini, M. J. Nategh, A. Abdollah, Vibration Cutting and Elliptical Ultrasonic Vibration Assisted Turning of In738 Workpieces, Journal of Applied and Computational Sciences in Mechanics, Vol. 23, No. 2, 2012 (in Persian)
  48. S. Amini, M. J. Nategh, One Directional and Elliptical Ultrasonic Vibration Assisted Cutting of In738, Modares Mechanical Engineering, Vol. 12, No. 6, 2013 (in Persian) 
  49. S. Amini, M. J. Nategh, One- and Two-Directional of Ultrasonic-Vibration Assisted Turning of Ud500 Workpiece, Amirkabir Mechanical Engineering, Vol. 44, No. 2, pp 93-101, 2010 (in Persian)
  50. M. J. Nategh, Natijato-Doulah or Three treatises in Industrial Inventions, Scientific Heritage of Islam& Iran, Vol. 1, No. 2, pp 100-107, 2013 (in Persian)
  51. H. Parvaz, M. J. Nategh, A pilot framework developed as a common platform integrating diverse elements of computer aided fixture design, International Journal of Production Research, Vol. 51, No. 22, pp. 6720-6732, 2013
  52. Davoud Karimi,Mohammad J Nategh, Development of a novel adaptive nonuniform rational basis spline interpolator with limited kinematic error for hexapod machine tools,Proc IMechE Part B: J Engineering Manufacture, Vol. 228, No. 3, pp. 319–327, 2014
  53. Mohammad Reza Chalak Qazani, Siamak Pedrammehr, Mohammad Javad Nategh, A study on motion of machine tools’ hexapod table on freeform surfaces with circular interpolation, International Journal of Advanced Manufacturing Technology, Vol. 75, pp. 1763–1771, 2014
  54. E. Rouhani Esfahani, M. J. Nategh, Instantaneous Center of Rotation of Flexure Joints and Velocity Kinematic Analysis of Microhexapod Using Screw Theory, Modares Mechanical Engineering, Vol. 15, No. 3, pp 173-180, 2015 (in Persian)
  55. M. Shankayi, M. J. Nategh, H. Soleimanimehr, The influence of vibration parameters on the time-domain stability of the turning operation (technical note), Journal of Acoustical Society of Iran, Vol. 1, No. 2, pp 48-52, 2014 (in Persian)
  56. 56 D. Manafi, M. J. Nategh, Investigation of Geometrical Rules and Introducing a Method Based on Permutation for Sequencing of Machining Features for Prismatic Parts, Modares Mechanical Engineering, Vol. 15, No. 10, pp. 311-319, 2015(In Persian)
  57. E. Rouhani, M. J. Nategh, Workspace, Dexterity and Dimensional Optimization of Microhexapod, Assembly Automation, Vol. 35, No. 4, pp. 341-347, 2015
  58. R. Ahadi, A. Rabbani, M. J. Nategh, Investigating of Machining Parameters Effect on Surface Roughness in Milling with Hexapod Machine Tool, Modares Mechanical Engineering, Proceedings of the Advanced Machining and Machine Tools Conference, Vol. 15, No. 13, pp. 90-94, 2015 (in Persian )
  59. H. Parvaz, M.J. Nategh, Analysis of jamming in locating systems of fixtures using minimum norm principle, Modares Mechanical Engineering, Proceedings of the Advanced Machining and Machine Tools Conference, Vol. 15, No. 13, pp. -, 2015 (in Persian )
  60. D. Manafi, M. J. Nategh, Mathematical modeling for effect of machine tools in setup planning method based on permutation for prismatic parts, Modares Mechanical Engineering, Proceedings of the Advanced Machining and Machine Tools Conference, Vol. 15, No. 13, pp. -, 2015 (in Persian )
  61. A. Rabbani,R. Ahadi,  M. J. Nategh, Machining NURBS curves with hexapod machine tool, Modares Mechanical Engineering, Proceedings of the Advanced Machining and Machine Tools Conference, Vol. 15, No. 13, pp.490-494, 2015 (in Persian )
  62. H. Parvaz, M.J. Nategh, Analytical model of locating system design for parts with free-form surfaces, Modares Mechanical Engineering, Proceedings of the Advanced Machining and Machine Tools Conference, Vol. 15, No. 13, pp. 129-133, 2015 (in Persian)
  63. H. Shahmohammadi Dermani, M. J. Nategh, M. M. Agheli, Upgrading the CNC system of hexapod machine tool by adding the five axis drilling cycle, Modares Mechanical Engineering, Proceedings of the Advanced Machining and Machine Tools Conference, Vol. 15, No. 13, pp. 45-49, 2015 (in Persian)
  64. V. Sanjabi, M.J. Nategh, Automatic selection of locating and clamping surfaces in polyhedral parts milling based on normal vector graph and linear algebra, Modares Mechanical Engineering, Proceedings of the Advanced Machining and Machine Tools Conference, Vol. 15, No. 13, pp. 134-138, 2015 (in Persian )
  65. M. Shankayi, M. J. Nategh, Analytical and experimental analysis of response of the cutting tool and the workpiece by the chatter phenomenon in turning, Modares Mechanical Engineering, Proceedings of the Advanced Machining and Machine Tools Conference, Vol. 15, No. 13, pp.218-222, 2015 (in Persian)
  66. S. V. Hoseini, M. J. Nategh, Optimum design of rotary forging machine, Modares Mechanical Engineering, Proceedings of the Advanced Machining and Machine Tools Conference, Vol. 15, No. 13, pp. 486-490, 2015 (in Persian)
  67. E. Rouhani, M.J. Nategh, Instantaneous Center of Rotation of Flexure Joints and Velocity Kinematic Analysis of Microhexapod Using Screw Theory, Modares Mechanical Engineering, Vol.15, No.3, pp.173-180, 2015 (In Persian)
  68. 68 E. Rouhani, M. J. Nategh, An elastokinematic solution to the inverse kinematics of microhexapod manipulator with flexure joints of varying rotation center, Mechanism and Machine Theory, Vol. 97, pp. 127-140, 2016
  69. D. Karimi, M. J. Nategh, Contour maps for developing optimal toolpath and workpiece setup in hexapod machine tools by considering the kinematics nonlinearity, Proc. IMechE, Part B: J. Engineering Manufacture, DOI: 10.1177/0954405415592123, pp 1-12, 2015
  70. D. Manafi, M. J. Nategh, A procedure for planning acyclic setups on the basis of simultaneous sequencing of setups and features, Int. J. Advanced Manufacturing Technology, DOI 10.1007/s00170-015-7740-8, pp 1-12, 2015
  71. D. Manafi, M. J. Nategh,H. Parvaz, Extracting the manufacturing information of machining features for computer-aided process planning system, Proc IMechE Part B: J Engineering Manufacture,pp 1-12, 2016
  72. Hadi Parvaz, Mohammad Javad Nategh, Development of an efficient method of jamming prediction for designing locating systems in computer-aided fixture design, International Journal of Advanced Manufacturing Technology, Published Online: 27 Jan 2016, DOI 10.1007/s00170-016-8401-2
  73.  H. Parvaz, M.J. Nategh, Stability analysis of free-form workpieces in fixtures, Modares Mechanical Engineering, Vol. 16, No. 2, pp. 245-252, 2015 (in Persian)

     
     
 
 
 
 
 
Conference Papers
1.      M. J. Nategh and M. Bakhshi, A Forging Design Program Featuring the Essentials of a Computer Integrated System for Forging Industries, Advanced Technology of Plasticity, Proc. 4th Int. Conf. Technology of Plasticity, Sept. 5-9, pp 1287-1292, 1993
2.      M. J. Nategh, An Expert Design Procedure for Modular Fixturing Systems, Proc. Of the Int. Conf. on Machining Technology in Asian & Pacific Regions, Nov. 30-Dec. 2, Guangzhou, China, pp 402-407, 1993
3.      M. J. Nategh and M. M. Mehdi Nejhad, An Investigation into the Rotary Forging Process Capabilities and Load Estimation, Proc. 9th Int. Cold Forging Conf., 22-26 May, Solihull, ENGLAND, PP 417-424, 1995
4.      M. J. Nategh, Numerical Procedures for Expert CAD of Fixturing Systems, Proc. The 6th Int. Conf. Manufacturing Engineering, 29 Nov.-1 Dec., Melbourne, Australia, pp 529-540, 1995
5.    M. J. Nategh, 'Backward Effect Approach' to Concurrency Planning, World Congress, Manufacturing Technology towards 2000, Cairns, Australia, pp 91-100, Sept. 1997
6.    M. J. Nategh, Growth and Development of Technology in Developing Countries and Iran, Winner of the Prize for Distinguished Paper, Proc. the 1st Seminar on Economical Reconstruction of I. R. Iran, Tarbiat Modares University, Economy Group, Tehran, Sept. 1989, pp 143-165, 1992(in Persian)
7.      M. Bakhshi and M. J. Nategh, CAD of Forging Dies for Axisymmetric Components, Proc. The 1st Conf. on Manufacturing Engineering in Heavy Industries, Amir Kabir University of Technology, Tehran, Sept. 13-14, pp 28-36, 1993 (in Persian)
8.      F. F. Saniee, M. J. Nategh, CAD of Fuller and Roller Dies, ibid, pp47-55 (in Persian)
 
9. M. M. Rajabi, M. J. Nategh, Simulation of Deep Drawing Process, ibid, pp 194-204 (in Persian)
10. F. F. Saniee, M. J. Nategh, A Review on Analytical and Experimental Procedures for Estimation of Forging Load and Energy, ibid, pp 233-240 (in Persian)
 
11. M. J. Nategh, The Effects of Temporal and Regional Parameters on the Quality of Technology Development, Proc. Seminar on Azerbaijan and Development, Tabriz, pp 967-980, 1993 (in Persian)
12. M. J. Nategh, H. R. Nafisi, S. Rafatjah, M. T. Khojasteh, E. Ebrahimi and J. Mahmoodi, Jazari's Innovations, Abstract Proc. International Congress on Development of Science and Technology in Islamic World, Tehran University, May 17-19, p 270, 1993 (in Persian)
13. H. Fadaee'an and M. J. Nategh, AXISLAB Software for Estimation of Flow Model in Hot Forging of Axisymmetric Components with Closed Dies, Proc. 3rd Annual Conf. of Mechanical Engineering, May 15-17, Amir Kabir University of Technology, pp 1017-1024, 1995 (in Persian)
14.D. Karimzadegan Moghaddam, R. G. Heidari and M. J. Nategh, Manufacturing of Copper Electrodes for Die-Making by Forging Method (in Persian), ibid, pp1047-1053
 
15. M. Ghatie and M. J. Nategh, Material Flow during the Forging of Axisymmetric Components with Closed Die, Proc. 4th Conf. Manufacturing Engineering, Tehran, Feb. 15-16, Amir Kabir University of Technology, pp 165-175, 1999 (in Persian)
16. G. Kherad, M. J. Nategh and M. R. Ghazawi, Investigation of Motion Profiles of Forming Tool in Orbital Forging Process, ibid, pp 176-184 (in Persian)
17. M. Bakhshi, S. Azizi, M. J. Nategh, A. Mohammadyoon, A. Marasi and K. Adibi, Design and Manufacture of a Prototype of Machining Center, ibid, pp 255-264 (in Persian)
18.Collaboration between National and International Agents, Essential to Development of Technology (in Persian), Seminar on Technology and Renovation of Industries(Proc. Not Published), 1999 (in Persian)
19.B. Jafari and M. J. Nategh, Analytical and experimental investigation on superplastic forming of titanium alloys, Proc. 6th Conf. Manufacturing Engineering, Tehran, Dec. 22-25, Amir Kabir University of Technology, pp 1-10, 2004 (in Persian)
20.M. Mahboubkhah, M. J. Nategh and S. Esmaeilzadeh Khadem, The inverse dynamic analysis of hexapod table of machine tools, 1st Int. and 7th National Conf. Manufacturing Engineering, Tehran, Dec. 12-15, Tarbiat Modares University, pp 1-11, 2005 (in Persian)
21.M. J. Nategh, D. Sharyari and M. Kazemi, Vibrational Analysis of the structure of 3-axis FP4MB CNC milling machine by FEM, 1st Int. and 7th National Conf. Manufacturing Engineering, Tehran, Dec. 12-15, Tarbiat Modares University, pp 1-11, 2005 (in Persian)
22. M. J. Nategh and V. Sanjabi, Modeling and simulation of routing and guiding system of AGVs, Proc. 14th Annual Int. Conf. of Mechanical Engineering, May, Isfahan University of Technology, pp 1-8, 2006 (in Persian)
23. M. J. Nategh and B. Jafari, HIP deep drawing of titanium-alloy components, 14th Annual Int. Conf. of Mechanical Engineering, May, Isfahan University of Technology, pp 1-8, 2006 (in Persian)
24. E. Roohani Esfahani, M. J. Nategh and A. Abdollah, Design and optimization of the structure of an electrochemical machine (ECM), Proc. 15th Annual Int. Conf. of Mechanical Engineering, May 15-17, Amirkabir University of Technology, pp 1-8, 2007 (in Persian)
25. D. Shariari, M. H. Sadeghi and M. J. Nategh, Modeling of parting line in blade forging dies, Proc. 4th Int. Conference and Exhibition on Design and Production of Machines and Dies/Molds, 21-23 July, Cesme, Turkey, pp 331-337, 2007
26. B. Sadeghi-Ghomi and M. J. Nategh, Design and manufacture of modular forging dies for axisymmetric workpieces, Proc. 4th Int. Conference and Exhibition on Design and Production of Machines and Dies/Molds, 21-23 July, Cesme, Turkey, pp 299-304, 2007
27. D. Karimi, M. J. Nategh and A. Mofidi, A study on the volume of hexapod machine tools' workspace, Proc. 4th Int. Conference and Exhibition on Design and Production of Machines and Dies/Molds, 21-23 July, Cesme, Turkey, pp 241-246, 2007
28. M. Mahboubkhah, M. J. Nategh and S. Esmaeilzadeh Khadem, Design of an improved kinematic controller for hexapod machine tools, Proc. 4th Int. Conference and Exhibition on Design and Production of Machines and Dies/Molds, 21-23 July, Cesme, Turkey, pp 237-240, 2007
29. S. Amini, M. J. Nategh and H. Soleimanimehr, Finite Element Analysis of Ultrasonic Cutting in One and Two Directions, 36th Annual UIA Symposium, 19-21 March, Teddington, Middlesex, England, 2007
30.M. A. Hoseini, H. R. M. Daniali and M. J. Nategh, Workspace analysis of Stewart_Gough parallel robot free of buckling in the legs, 2nd Int. and 8th National Conf. Manufacturing Engineering, Tehran, 11-13 Dec., University of Science and Technology, Tehran, Iran, pp 1-10, 2008 (in Persian)
31. H. Soleimanimehr, M. J. Nategh, S. Amini, A. Abdollah and M. H. Sadeghi, Prediction of the frequency of the longitudinal mode of horn vibration with the aid of artificial neural network, Proc. National Conf. on Manufacturing Engineering, 20-21 Feb., Najafabad Azad University, Isfahan, Iran, pp 1-9, 2008 (in Persian)
32. M. M. Agheli and M. J. Nategh, Measurement of kinematic parameters of hexapod and design of experiments for calibration, Proc. 16th Annual Int. Conf. of Mechanical Engineering, May, Shahid Bahonar University, Kerman, Iran, pp 1-7, 2008 (in Persian)
33. M. J. Nategh, S. Amini and H. Soleimanimehr, Modeling the force, surface roughness and cutting temperature in ultrasonic vibration-Assistes turning of Al7075, Proc. of The Int. Conf. on Advances in Materials & Processing Technologies, AMPT, 2-8 Nov., Manama, Bahrain, pp 1-10, 2008
34. H. Soleimanimehr, M. J. Nategh and S. Amini, Prediction of machining force and surface roughness in ultrasonic vibration-assisted turning using neural networks, Proc. of The Int. Conf. on Advances in Materials & Processing Technologies, AMPT, 2-8 Nov., Manama, Bahrain, pp 1-8, 2008
35. S. Amini, E. Shamoto, N. Suzuki and M. J. Nategh, FE analysis of one directional and elliptical ultrasonic vibration-assisted cutting of In738, Proc. of The Int. Conf. on Advances in Materials & Processing Technologies, AMPT, 2-8 Nov., Manama, Bahrain, pp 1-10, 2008
36.M. M. Agheli and M. J. Nategh, Observability of kinematics parameter errors for calibration of parallel robots as Stewart platform, 9th National Conf. Manufacturing Engineering, March 3-5, The University of Birjand, Birjand, Iran, pp 1-9, 2009
37. H. Soleimanjahi, M. J. Nategh and S. Falahi, A performance appraisal of neural networks developed for response prediction across heterogeneous domains, Proc. World Academy of Science, Engineering and Technology, ICMSE, April 28-30, Rome, Italy, pp 263-268, 2009
38. M. M. Agheli and M. J. Nategh, Identifying the kinematic parameters of hexapod machine tool, Proc. World Academy of Science, Engineering and Technology, ICMSE, April 28-30, Rome, Italy, pp 380-385, 2009
39. H. Soleimanimehr, M. J. Nategh and S. Amini, Modeling of surface roughness in vibration cutting by artificial neural network, Proc. World Academy of Science, Engineering and Technology, ICMSE, April 28-30, Rome, Italy, pp 386-391, 2009
40. D. Karimi and M. J. Nategh, A study on the quality of hexapod machine tool's workspace, Proc. World Academy of Science, Engineering and Technology, ICMSE, April 28-30, Rome, Italy, pp 397-402, 2009
41.M. M. Agheli and M. J. Nategh, Determination of optimum locations of joints centers in the layout of hexapod machine tool, !7th Int. Conf.on Mech. Eng.,  Tehran University, Tehran, 2009 (in persian)
42. M. M. Agheli and M. J. Nategh, Calibration of hexapod machine tool table, !7th Int. Conf.on Mech. Eng.,  Tehran University, Tehran, 2009 (in persian)
43. M. M. Agheli and M. J. Nategh, Measurement of 6 DOF-position and orienjoint of hexapod parallel robot by using digital camera, !7th Int. Conf.on Mech. Eng.,  Tehran University, Tehran, 2009 (in persian)
44. H. Soleimanimehr, M. J. Nategh and s.Amini, Analysis of diametrical error of machined workpieces in ultrasonic vibration assisted turning,  Advances in materials and processing technologies, AMPT, October 26-29, Quala Lampur, Malaysia, 2009 
45. S. Amini, E. Shamoto, N. Suzuki, M. J. Nategh and H. Soleimanimehr, FE Analysis and Experiments of One Directional and Elliptical  Ultrasonic Vibration-Assisted  Cutting of Copper, AMPT, October 26-29, Quala Lampur, Malaysia, 2009
46. M. J. Nategh and H. Soleimanimehr, Prediction of horn's intensifying factor by using artificial neural network and regression analysis, 10th National Conf. Manufacturing Engineering, March 1-3, Nooshirvani University of Technology, Babol, Iran, 2010 (in persian)
47. M. J. Nategh, M. Shankaei and H. Soleimanimehr, Machining jigs and fixtures planning by using expert systems, 10th National Conf. Manufacturing Engineering, March 1-3, Nooshirvani University of Technology, Babol, Iran, 2010 (in persian) 
48. S. Amini, M. J. Nategh, A Abdollah, Ultrasonic-Vibration-Assisted Machining Under Longitudinal Wave, 11th National Conf. Manufacturing Engineering, September 19-21, Tabriz University, Tabriz , Iran, 2010 (in Persian)
49. S. Amini, M. J. Nategh, A Abdollah, Ultrasonic-Vibration-Assisted Machining of Low Carbon Steel Under Bending Wave, 11th National Conf. Manufacturing Engineering, September 19-21, Tabriz University, Tabriz , Iran, 2010 (in Persian)
50. H. Jamshidi, M. J. Nategh, H. Razavi, B. Gholamzadeh, An Investigation on the Influence of Lubricant on Machining Forces in Semi-Orthogonal Turning with the Aid of Ultrasonic Vibration for Al7075, 11th National Conf. Manufacturing Engineering, September 19-21, Tabriz University, Tabriz , Iran, 2010 (in Persian) 
51. B. Gholamzadeh, M. J. Nategh, H. Jamshidi,  H. Razavi, Finite Element Modeling of Ultrasonic-Vibration-Assisted Turning of Al7075-T6 and Study of the Effect of Vibration Amplitude and Frequency on the Tool Tip Temperature Rise, 11th National Conf. Manufacturing Engineering, September 19-21, Tabriz University, Tabriz , Iran, 2010, (in Persian) 
52.  H. Soleimanimehr, M. J. Nategh, B. Gholamzadeh, Experimental Analysis of Workpiece's Diametrical Error in Ultrasonic-Vibration-Assisted Turning, Proc. of The Int. Conf. on Advances in Materials & Processing Technologies, AMPT, 24-27 Oct., Paris, France, 2010, Vol. 1315, No. 1, pp. 1175-1180, API Publishing, 2011
53.  H. Soleimanimehr, M. J. Nategh, An Investigation on the Influence of Cutting-Force's Components on the Workpiece Diametrical Error in Ultrasonic-Vibration-Assisted Turning, Proc. of The Int. Conf. on Advances in Materials & Processing Technologies, AMPT, 24-27 Oct., Paris, France, 2010, Vol. 1315, No. 1, pp. 1145-1150, API Publishing, 2011
54.  H. Jamshidi, H. Soleimanimehr, B. Gholamzadeh,M. J. Nategh, An Investigation on the Tool Wear in Ultrasonically Assisted Turning, Proc. of The Int. Conf. on Advances in Materials & Processing Technologies, AMPT, 24-27 Oct., Paris, France, 2010
55. M. J. Nategh, Ingenious mechanical devices in Maraghe observatory, Conference on the Scientific and Philosophical Heritage of Nasir al-Din al-Tusi, 23-24 Feb., Tehran, 2011 (Abstract- in Persian)
56. H. Parvaz, M. J. Nategh, A  multi-TAD framework for recognizing machining features using hint based recognition algorithm, Proc. of The Int. Conf. on Advances in Materials & Processing Technologies, AMPT, 13-16 July., Istanbul, Turkey, 2011
57 H. Parvaz, M. J. Nategh, Modeling hydrodynamic lubrication function of scraping in machine tool slideways, Proc. of The Int. Conf. on Advances in Materials & Processing Technologies, AMPT, 13-16 July., Istanbul, Turkey, 2011
58 H. Razavi, M. J. Nategh, H. Soleimanimehr, An investigation of lateral Surface hardness and related Cutting Forces in One-Directional Ultrasonic-Vibration Assisted Turning, Proc. of The Int. Conf. on Advances in Materials & Processing Technologies, AMPT, 13-16 July., Istanbul, Turkey, 2011
59 H. Soleimanimehr, M. J. Nategh, H. Jamshidi, Mechanistic model of work-piece diametrical error in conventional and ultrasonic assisted turning, Proc. of The Int. Conf. on Advances in Materials & Processing Technologies, AMPT, 13-16 July., Istanbul, Turkey, 2011
60 D. Karimi, M. J. Nategh, The stiffness Based Optimal Architectural Analysis of Hexapod Machine Tools, International conference on Applied Mechanical Engineering- WASET2011, Nov. 28-30, pp 2904-2910
61 H. Parvaz, M. J. Nategh, A multi-TAD automatic machining feature recognition framework using hybrid approach, National Conference on Mechanical Engineering of Iran, 27 February, Shiraz, Iran, 2014
62 H. Parvaz, M. J. Nategh, Development and implementation of a feature based semi-automatic production system, National Conference on Mechanical Engineering of Iran, 27 February, Shiraz, Iran, 2014
 
Entries in Encyclopaedia
Encyclopaedia of the World of Islam (in Persian), Foundation for the Islamic Encyclopaedia, Tehran, Iran
 1.    M. J. Nategh, Barbakh (an Astronomical Device), Vol. 2, pp 1290-1291, 1996
 
2.      M. J. Nategh, Banumusa, Vol. 4, pp 403-405, 1998
3.      M. J. Nategh and F. Ghasemloo, Balance, Vol. 6, pp 812-817, 2001
4.      M. J. Nategh, Jazari, Vol. 10, pp 270-276, 2007
5.      M. J. Nategh, History and Kinds of Wheel in Islamic Mechanics, Vol. 11, pp 798-802, 2008
6.      M. J. Nategh, Waterwheel, Vol. 11, pp 805-810, 2008
7.      M. J. Nategh, Heyal, Vol. 14, pp 543-549, 2010
 
  Books
1.      Jazari, The Book of Knowledge of Ingenious Mechanical Devices (in Arabic from 12th century), Translated and Annotated by M. J. Nategh, H. R. Nafisi and S. Rafatjah, Tehran, Iran, 2002 (in Persian)
2.      M. J. Nategh, Machine Tools' Jigs and Fixtures Design, Tarbiat Modares University Press, Tehran, Iran, 2007 (in Persian)
 
Patents
1.      Orbital Forging Machine, Patent No. 25106, Tehran, Iran,1994
2.      Ultrasonic-Vibration Assisted Turning, Patent No. 43684, Tehran, Iran, 2007
3.   Six-Axis Hexapod Milling Machine, Patent No. 65964, Tehran, Iran, 2010