YEAR |
TITLE |
2023 |
Resistance spot weldability of Fe66Cr16. 5Ni14. 1Si3. 4 advanced
high strength steel using D-optimal design of experiment method
MH Amini-Chelak, R Miresmaeili, M Askari-Paykani, H Aliyari,
...
Journal of Materials Research and Technology 25, 5615-5632
|
2023 |
Effect of hydrogen on the deformation mechanisms of metastable 304 austenitic
stainless steel
E Norouzi, R Miresmaeili, HR Shahverdi, M Askari-Paykani, LM Vergani
Materials Letters 338, 134021
|
2023 |
Ancillary Processes for High-Quality Additive Manufacturing: A Review of
Microstructure and Mechanical Properties Improvement
B Parvaresh, H Aliyari, R Miresmaeili, M Dehghan, M Mohammadi
Metals and Materials International, 1-33
|
2023 |
Cooling rate effects on fatigue life prediction using hardness measurements
for in-service steel patch-welds with and without TIG dressing treatment
S Barzegar-Mohammadi, M Haghpanahi, M Zeinoddini, R Miresmaeili
Structures 50, 1285-1302
|
2023 |
Investigation of Surface Nanostructuring, Mechanical Performance and Deformation
Mechanisms of AISI 316L Stainless Steel Treated by Surface Mechanical Impact
Treatment
M Rostami, R Miresmaeili, A Heydari Astaraee
Metals and Materials International 29 (4), 948-967
|
2023 |
Hydrogen embrittlement behavior in FeCCrNiBSi TRIP steel
EN Masir, R Miresmaeili, HR Shahverdi, M Askari-Paykani, LM Vergani
Journal of Materials Research and Technology
|
2022 |
Effects of TIG dressing, PWHT and temper bead techniques on microstructure
and fatigue strength of fillet welded steel patch repairs: An experimental
investigation
S Barzegar-Mohammadi, M Haghpanahi, M Zeinoddini, R Miresmaeili
Journal of Materials Research and Technology
|
2022 |
Investigation of Surface Nanostructuring, Mechanical Performance and
Deformation Mechanisms of AISI 316L Stainless Steel Treated by Surface
Mechanical Impact Treatment
M Rostami, R Miresmaeili, A Heydari Astaraee
Metals and Materials International, 1-20
|
2022 |
Effects of a Novel Severe Plastic Deformation Approach on Microstructural
and Mechanical Characteristics of a Medium Manganese Advanced High Strength
Steel
M Dehghan, R Miresmaeili, M Askari-Paykani, HR Shahverdi
Metals and Materials International 28 (5), 1232-1245
|
2022 |
The Effect of Pre-Strain on Microalloyed Steel Weld Metal in the Presence
of Hydrogen
R Khatib Zadeh Davani, R Miresmaeili
Transactions of the Indian Institute of Metals 75 (2), 565-576
|
2021 |
The effect of pulsed laser welding on hot cracking susceptible region
size and weld pool internal geometry of Inconel 718: Numerical and experimental
approaches
A Keivanloo, H Naffakh-Moosavy, R Miresmaeili
CIRP Journal of Manufacturing Science and Technology 35, 787-794
|
2021 |
Effects of surface nanocrystallization on the anodic oxidation behavior
of Aluminum
AH Astaraee, R Miresmaeili, S Bagherifard, M Guagliano
Forces in Mechanics 4, 100028
|
2021 |
Effect of microstructure on the mechanical properties and fracture toughness
of API X65 pipeline steel in the presence of hydrogen
M Ranjbar, R Miresmaeili, MR Naimi-Jamal, M Mirzaei
Metals and Materials International 27 (10), 3918-3934
|
2021 |
Effects of surface nanocrystallization on the anodic oxidation behavior
of Aluminum
A Heydari Astaraee, R Miresmaeili, S Bagherifard, M Guagliano
|
2021 |
Investigating isotropy of mechanical and wear properties in as-Deposited
and inter-Layer cold worked specimens manufactured by wire arc additive
manufacturing
B Parvaresh, R Salehan, R Miresmaeili
Metals and Materials International 27 (1), 92-105
|
2020 |
Martensitic transformation in stoichiometric NiMn and Ni–Mn-X alloys:
A first principles study
MR Niazi, S Sanjabi, Y Jamali, R Miresmaeili
Journal of Alloys and Compounds 845, 155978
|
2020 |
Characterization of wire arc additive manufactured products: A comparison
between as-deposited and inter-layer cold worked specimens
B Parvaresh, R Miresmaeili, M Yazdizadeh
Journal of Manufacturing Processes 57, 61-71
|
2020 |
The effect of surface mechanical attrition treatment (SMAT) on plastic
deformation mechanisms and mechanical properties of austenitic stainless
steel 316L
E Rajabi, R Miresmaeili, M Aliofkhazraei
Materials Research Express 6 (12), 1250g8
|
2020 |
Damage mechanisms in the ultra-low cycle fatigue loading
M Kermajani, FM Ghaini, R Miresmaeili, MK Baghi-abadi, ...
Engineering Fracture Mechanics 223, 106772
|
2020 |
Sliding wear behavior of Ni–Co–P multilayer coatings electrodeposited
by pulse reverse method
A Karimzadeh, AS Rouhaghdam, M Aliofkhazraei, R Miresmaeili
Tribology International 141, 105914
|
2019 |
Effects of annealing on the tribological behavior of Zr60Cu10Al15Ni15
bulk metallic glass
R Salehan, HR Shahverdi, R Miresmaeili
Journal of Non-Crystalline Solids 517, 127-136
|
2019 |
Intercritical and subcritical spheroidization of 10B38 cold heading
steel
A Radnia, FM Ghaini, R Miresmaeili
Materials Research Express 6 (9), 096525
|
2019 |
Effect of Hydrogen on Mechanical Properties of Pipeline Steel Weld Metal
R Khatib Zadeh Davani, R Miresmaeili, M Soltanmohammadi
Journal of Petroleum Research 29 (1-98), 4-15
|
2019 |
Hardness and wear behavior of surface mechanical attrition treated titanium
M Rajabi, R Miresmaeili, M Aliofkhazraei
Materials Research Express 6 (6), 065003
|
2019 |
Investigation of structural and mechanical properties of magnetic pulse
welded dissimilar aluminum alloys
M Pourabbas, A Abdollah-zadeh, M Sarvari, M Pouranvari, R Miresmaeili
Journal of Manufacturing Processes 37, 292-304
|
2018 |
Electrodeposition of Ni–Mo and Ni–Mo-(nano Al2O3)
multilayer coatings
A Rezaeiolum, M Aliofkhazraei, A Karimzadeh, AS Rouhaghdam, ...
Surface Engineering 34 (6), 423-432
|
2018 |
Temperature effect of hot rolling process on microstructure, strength
and fracture toughness of X65 pipeline steel
P Siahpour, R Miresmaeili, A Sabour Rouhaghdam
Transactions of the Indian Institute of Metals 71 (6), 1531-1541
|
2018 |
Effect of thermomechanical parameters on mechanical properties of base
metal and heat affected zone of X65 pipeline steel weld in the presence
of hydrogen
RKZ Davani, R Miresmaeili, M Soltanmohammadi
Materials science and engineering: A 718, 135-146
|
2018 |
Improvement in tribological behavior of commercial pure titanium (CP-Ti)
by surface mechanical attrition treatment (SMAT)
SA Chamgordani, R Miresmaeili, M Aliofkhazraei
Tribology International 119, 744-752
|
2018 |
Second-phase hardening and rule of mixture, microbands and dislocation
hardening in Fe67. 4− xCr15. 5Ni14. 1Si3. 0Bx (x= 0, 2) alloy systems
M Askari-Paykani, HR Shahverdi, R Miresmaeili, H Beladi
Materials Science and Engineering: A 715, 214-225
|
2017 |
Mechanistic models for environmentally-assisted cracking in sour service
SH Zaferani, R Miresmaeili, MK Pourcharmi
Engineering Failure Analysis 79, 672-703
|
2017 |
Analysis of tensile deformation behavior of AM2B® advanced high-strength
steel using electron back-scattered diffraction technique
M Askari-Paykani, HR Shahverdi, R Miresmaeili, H Beladi
Materials Characterization 130, 64-73
|
2017 |
Plastic Deformation Promoted by δ-Ferrite-to-Austenite Transformation
in the Heat-Treated Cold-Rolled Novel Advanced High-Strength Steel in
FeCrNiBSi Alloy System
M Askari-Paykani, HR Shahverdi, R Miresmaeili
ISIJ International 57 (6), 1138-1140
|
2017 |
Incorporating the principles of shot peening for a better understanding
of surface mechanical attrition treatment (SMAT) by simulations and
experiments
AH Astaraee, R Miresmaeili, S Bagherifard, M Guagliano, M Aliofkhazraei
Materials & Design 116, 365-373
|
2017 |
The mutual effects of hydrogen and microstructure on hardness and impact
energy of SMA welds in X65 steel
R Miresmaeili, A Abdollah-Zadeh
Materials Science and Engineering: A 679, 87-94
|
2016 |
First and third generations of advanced high-strength steels in a FeCrNiBSi
system
M Askari-Paykani, HR Shahverdi, R Miresmaeili
Journal of Materials Processing Technology 238, 383-394
|
2016 |
Effect of boron addition on microstructural Evolution and room-temperature
mechanical properties of Novel Fe66− x CrNiB x Si (x= 0, 0.25, 0.50
and 0.75 wt Pct) advanced high …
M Askari-Paykani, HR Shahverdi, R Miresmaeili
Metallurgical and Materials Transactions A 47 (11), 5423-5437
|
2016 |
Fatigue crack growth behavior of a type of novel advanced high-strength
steel in a FeCrNiBSi alloy system: A comparison between heat-treated
cast and hot-rolled specimens
M Askari-Paykani, HR Shahverdi, R Miresmaeili
Materials Science and Engineering: A 673, 280-287
|
2016 |
Effect of weld metal toughness on fracture behavior under ultra-low
cycle fatigue loading (earthquake)
M Kermajani, FM Ghaini, R Miresmaeili, AA Aghakouchak, M Shadmand
Materials Science and Engineering: A 668, 30-37
|
2016 |
Microstructural evolution and mechanical properties of a novel FeCrNiBSi
advanced high-strength steel: Slow, accelerated and fast casting cooling
rates
M Askari-Paykani, HR Shahverdi, R Miresmaeili
Materials Science and Engineering: A 668, 188-200
|
2015 |
Optical properties of Ag-Cu alloy nanoparticles synthesized by DC arc
discharge in liquid
SHH Rahaghi, R Poursalehi, R Miresmaeili
Procedia Materials Science 11, 738-742
|
2015 |
Laser melting effects on microstructure and corrosion behavior of plasma
electrolytic oxidation nanocomposite coatings on pure titanium
M Habibi, R Miresmaeili, M Aliofkhazraei, SA Chamgordani
Procedia Materials Science 11, 491-497
|
2014 |
Fatigue Testing of Hydrogen-Exposed Austenitic Stainless Steel Welded
Samples
P Ferro, R Miresmaeili, A Nekimken
International Hydrogen Conference (IHC 2012)
|
2013 |
Hydrogen‐Exposed Welded Specimens in Bending and Rotational Bending
Fatigue
P Ferro, J Ross, T Goade, R Miresmaeili, W Tiedemann, D Howard,
...
Advances in Materials Science for Environmental and Energy Technologies
II …
|
2012 |
A possible explanation for the contradictory results of hydrogen effects
on macroscopic deformation
R Miresmaeili, L Liu, H Kanayama
International journal of pressure vessels and piping 99, 34-43
|
2012 |
Numerical Analysis of Hydrogen Effect on Void Growth
L Liu, R Miresmaeili, A Premono
計算工学講演会論文集 Proceedings of the Conference on Computational …
|
2012 |
turnal of Computational Vol 6 No. 2, 2012
A PREMONO, L LIU, R MIRESMAEILI
|
2012 |
Finite Element Simulation of Tensile Tests for α-Iron in the Presence
of Hydrogen
A Premono, L Liu, R Miresmaeili, H Kanayama
Journal of Computational Science and Technology 6 (2), 39-53
|
2011 |
F404 Finite Element Simulation of Hydrogen Effects on the Tensile Properties
of Metals and Alloys
A Premono, L Liu, R Miresmaeili, M Ogino, H Kanayama
The Proceedings of The Computational Mechanics Conference 2011.24,
_F-51_-_F-53_
|
2011 |
F104 Numerical Simulations of Hydrogen-Plasticity Interactions in Metallic
Materials
L Liu, A Premono, R Miresmaeili, H Kanayama
The Proceedings of The Computational Mechanics Conference 2011.24,
_F-9_-_F-12_
|
2011 |
Significance of temperature increase in processing by high-pressure
torsion
K Edalati, R Miresmaeili, Z Horita, H Kanayama, R Pippan
Materials Science and Engineering: A 528 (24), 7301-7305
|
2011 |
Finite element implementation of an elastoplastic constitutive equation
in the presence of hydrogen
L Liu, R Miresmaeili, M Ogino, H Kanayama
Journal of Computational Science and Technology 5 (1), 62-76
|
2010 |
F3-5 Finite Element Analysis of a Coupled Elastoplastic-Transient Hydrogen
Diffusion in Materials
L Liu, R Miresmaeili, M Ogino, H Kanayama
The Proceedings of The Computational Mechanics Conference 2010.23,
_F-42_-_F-43_
|
2010 |
Finite element analysis of large elasto-plastic deformation in hydrogen
related problems
M Reza
九州大学
|
2010 |
An Uncoupled Crystal Plasticity-Transient Hydrogen Diffusion Analysis
to Investigate the Effect of Crystallographic Orientation on Hydrogen
Redistributions
R Miresmaeili, H Notsu, N Saintier, JM Olive, H Kanayama
대한기계학회 춘추학술대회, 11-12
|
2010 |
A coupled elastoplastic-transient hydrogen diffusion analysis to simulate
the onset of necking in tension by using the finite element method
R Miresmaeili, M Ogino, T Nakagawa, H Kanayama
International journal of hydrogen energy 35 (3), 1506-1514
|
2010 |
材料内の一方向連成結晶塑性-水素拡散シミュレーション
野津裕史, 金山寛
理論応用力学講演会 講演論文集 第 59 回理論応用力学講演会, 151-151
|
2010 |
F3-5 有限要素法を用いた材料内の弾塑性水素拡散連成解析 (F3. 低炭素社会向けシミュレーション技術)
L Liu, R Miresmaeili, M Ogino, H Kanayama
計算力学講演会講演論文集 2010, _F-42_-_F-43_
|
2010 |
One-way coupled crystal plasticity-hydrogen diffusion simulation on
artificial microstructure
R Miresmaeili, N Saintier, H Notsu, JM Olive, H Kanayama
Journal of Computational Science and Technology 4 (2), 105-120
|
2009 |
Reconsideration of the hydrogen diffusion model using the McNabb-foster
formulation
H Kanayama, S Ndong-Mefane, M Ogino, R Miresmaeili
九州大学大学院工学研究院 69 (4), 149-151
|
2009 |
F2-5 A One-Way Coupled Crystalline Plasticity-Transient Hydrogen Diffusion
Analysis to Simulate the Effect of the Heterogeneity of Stress-Strain
States on Hydrogen …
R Miresmaeili, N Saintier, H Notsu, JM Olive, H Kanayama
The Proceedings of The Computational Mechanics Conference 2009.22,
268-269
|
2009 |
F2-6 A Finite Element Analysis of Hydrogen Diffusion in a Stainless
Steel Containing Strain-Induced Martensite
R Miresmaeili, H Notsu, T Nakagawa, JM Olive, M Ogino, H Kanayama
The Proceedings of The Computational Mechanics Conference 2009.22,
270-271
|
2008 |
Experimental and numerical analyses of residual stress distributions
in TIG welding process for 304L stainless steel
SAAA Mousavi, R Miresmaeili
Journal of materials processing technology 208 (1-3), 383-394
|
2008 |
Carburizing of low-melting-point metals by pulsed nanocrystalline plasma
electrolytic carburizing
M Aliofkhazraei, C Morillo, R Miresmaeili, AS Rouhaghdam
Surface and Coatings Technology 202 (22-23), 5493-5496
|
2008 |
Hydrogen-related Science, Technologies and Society
I Campus
Bordeaux University
|
2008 |
Experimental and Numerical Investigations of Residual Stress Distributions
in the TIG Welding Process
R Miresmaeili, SAAA Mousavi
Materials Science Forum 580, 331-334
|
2008 |
Finite element analysis of the stress and deformation fields around
the blunting crack tip
R Miresmaeili, M Ogino, R Shioya, H Kawai, H Kanayama
九州大学大学院工学研究院 68 (4), 151-161
|
2008 |
Hydrogen transport in a coupled elastoplastic-diffusion analysis near
a blunting crack tip
H Kanayama, M Ogino, R Miresmaeili, T Nakagawa, T Toda
Journal of Computational Science and Technology 2 (4), 499-510
|
2005 |
Experimental and three dimensional finite element analysis of residual
stresses and distortions for multi-pass TIG welding
R Miresmaeili, AAA Mousavi
Inter. Conf. Recent Advan. Mech. & Mat. Eng.(ICRAMME2005), University
of …
|
|
Fatigue Life Estimation of Single Spot Weld: A finite element approach
H Aliyari, R Miresmaeili, S Kooshamanesh
|
|
Effect of Hydrogen on Mechanical Properties of Pipeline Steel Weld Metal
RKZ Davani, R Miresmaeili, M Soltanmohammadi
|