| YEAR |
TITLE |
| 2023 |
Effects of B/C ratio on the structural and mechanical properties of TiBCN
coating deposited by PACVD
F Movassagh-Alanagh, A Abdollah-Zadeh
Ceramics International 49 (16), 26191-26204
|
| 2023 |
The effects of friction stir welding on microstructure and formability of
7075-T6 sheet
A Mehri, A Abdollah-zadeh, S Entesari, T Saeid, JT Wang
Results in Engineering 18, 101041
|
| 2023 |
A possibility study on plasma-assisted synthesis of hybrid multi-scale
Al-(Al2O3+ AlxTiy) nanocomposite coatings for wear resistance applications:
A look at microstructure …
A Azarniya, A Abdollah-zadeh, E Taheri-Nassaj
Surface and Coatings Technology 454, 129106
|
| 2023 |
Plasma-enhanced chemical vapor deposition of TiB2 and TiBN hard coatings
using BBr3
F Movassagh-Alanagh, A Abdollah-Zadeh, MA Zolbin, N Nemati, ...
Tribology International 179, 108137
|
| 2022 |
Cold-spray manufacturing of Zn/ZnO nanocomposite targets for ZnO sputtering
M Kadkhodaee, A Abdollah-zadeh, H Assadi, RA Seraj
Surface Engineering 38 (5), 465-471
|
| 2022 |
Effect of substrate on the properties of cold sprayed coating of WC-10Ni
RA Seraj, A Abdollah-Zadeh, H Assadi, H Hajipour, M Kadkhodaee
Advances in Materials and Processing Technologies 8 (1), 108-121
|
| 2020 |
Role of collision angle during dissimilar Al/Cu magnetic pulse welding
M Pourabbas, A Abdollah-Zadeh, M Sarvari, F Movassagh-Alanagh, ...
Science and Technology of Welding and Joining 25 (7), 549-555
|
| 2020 |
Investigation of tribological properties of Zn/ZnO nanocomposite targets
produced by cold spray process
M Kadkhodaee, A Abdollah-zadeh, H Assadi, RA Seraj
Journal of Science and Technology of Composites 7 (2), 823-832
|
| 2020 |
The effects of rotational speed on microstructure and mechanical properties
of friction stir-welded 7075-T6 thin sheet
A Mehri, A Abdollah-zadeh, N Habibi, M Hajian, JT Wang
Journal of Materials Engineering and Performance 29 (4), 2316-2323
|
| 2020 |
Correlation between the Al content and corrosion resistance of TiAlN
coatings applied using a PACVD technique
H Elmkhah, A Fattah-alhosseini, K Babaei, A Abdollah-Zadeh, ...
Journal of Asian Ceramic Societies 8 (1), 72-80
|
| 2019 |
A comparative study of the mechanical and tribological properties of
PECVD single layer and compositionally graded TiSiCN coatings
M Abedi, A Abdollah-Zadeh, A Vicenzo, M Bestetti, F Movassagh-Alanagh,
...
Ceramics International 45 (17), 21200-21207
|
| 2019 |
Effect of friction stir welding parameters on the microstructure and
microtexture evolution of SAF 2205 stainless steel
S Emami, T Saeid, A Abdollah-Zadeh
Journal of Alloys and Compounds 810, 151797
|
| 2019 |
The effects of Al2O3 particles on the microstructure and hardness of
cold sprayed Al-Al2O3 composite coating
H Ziaei, A Abdollah-zadeh, Z Eyvazi, R Seraj, F Kargar
Journal of Science and Technology of Composites 6 (3), 473-480
|
| 2019 |
The effects of SiC particles on the microstructure and hardness of cold
sprayed Al-SiC composite coating
Z Eyvazi, A Abdollah-Zadeh, H Ziaei, R Seraj, F Kargar
Journal of Science and Technology of Composites 6 (3), 385-392
|
| 2019 |
Elimination of hot cracking in the electron beam welding of AA2024-T351
by controlling the welding speed and heat input
SA Hosseini, A Abdollah-Zadeh, H Naffakh-Moosavy, A Mehri
Journal of Manufacturing Processes 46, 147-158
|
| 2019 |
Investigation of collision surfaces and weld interface in magnetic pulse
welding of dissimilar Al/Cu sheets
M Sarvari, A Abdollah-zadeh, H Naffakh-Moosavy, A Rahimi
Journal of Manufacturing Processes 45, 356-367
|
| 2019 |
Comparison of Stellite coatings on low carbon steel produced by CGS
and HVOF spraying
RA Seraj, A Abdollah-zadeh, S Dosta, H Assadi, IG Cano
Surface and Coatings Technology 372, 299-311
|
| 2019 |
Photovoltaic performance improvement in vacuum-assisted meniscus printed
triple-cation mixed-halide perovskite films by surfactant engineering
E Parvazian, A Abdollah-zadeh, M Dehghani, N Taghavinia
ACS Applied Energy Materials 2 (9), 6209-6217
|
| 2019 |
In situ hybrid aluminum matrix composites: a review of phase transformations
and mechanical aspects
A Azarniya, A Azarniya, A Abdollah‐zadeh, HR Madaah Hosseini, ...
Advanced Engineering Materials 21 (7), 1801269
|
| 2019 |
The effect of traverse speed on deposition efficiency of cold sprayed
Stellite 21
RA Seraj, A Abdollah-zadeh, S Dosta, H Canales, H Assadi, IG Cano
Surface and Coatings Technology 366, 24-34
|
| 2019 |
The effects of back-plate support and welded metal type on the characteristics
of joints produced by magnetic pulse welding
MA Moghaddas, A Abdollah-Zadeh, M Hajian
The International Journal of Advanced Manufacturing Technology 102
(1), 379-392
|
| 2019 |
Fabrication of perovskite solar cells based on vacuum-assisted linear
meniscus printing of MAPbI3
E Parvazian, A Abdollah-zadeh, HR Akbari, N Taghavinia
Solar Energy Materials and Solar Cells 191, 148-156
|
| 2019 |
Effects of functionally graded TiN layer and deposition temperature
on the structure and surface properties of TiCN coating deposited on
plasma nitrided H13 steel by PACVD method
E Damerchi, A Abdollah-zadeh, R Poursalehi, MS Mehr
Journal of Alloys and Compounds 772, 612-624
|
| 2019 |
Investigation of structural and mechanical properties of magnetic pulse
welded dissimilar aluminum alloys
M Pourabbas, A Abdollah-zadeh, M Sarvari, M Pouranvari, R Miresmaeili
Journal of Manufacturing Processes 37, 292-304
|
| 2018 |
Effect of feedstock powder morphology on cold-sprayed titanium dioxide
coatings
H Hajipour, A Abdollah-Zadeh, H Assadi, E Taheri-Nassaj, H Jahed
Journal of Thermal Spray Technology 27 (8), 1542-1550
|
| 2018 |
Improving the bio-corrosion behavior of AISI316L stainless steel through
deposition of Ta-based thin films using PACVD
H Ghorbani, A Abdollah-Zadeh, F Bagheri, A Poladi
Applied Surface Science 456, 398-402
|
| 2018 |
Enhancing the adhesion of diamond-like carbon films to steel substrates
using silicon-containing interlayers
S Delfani-Abbariki, A Abdollah-zadeh, SMM Hadavi, M Abedi, ...
Surface and Coatings Technology 350, 74-83
|
| 2018 |
The effects of phase transformation on the structure and mechanical
properties of TiSiCN nanocomposite coatings deposited by PECVD method
M Abedi, A Abdollah-zadeh, M Bestetti, A Vicenzo, A Serafini, ...
Applied Surface Science 444, 377-386
|
| 2018 |
A new approach to improve the surface properties of H13 steel for metal
forming applications by applying the TiAlN multi-layer coating
H Elmkhah, F Mahboubi, A Abdollah-Zadeh, ARS Rouhaghdam
Journal of Manufacturing Processes 32, 873-877
|
| 2018 |
Influence of Si content on the wettability and corrosion resistance
of nanocomposite TiSiN films deposited by pulsed-DC PACVD
F Movassagh-Alanagh, A Abdollah-zadeh, M Asgari, MA Ghaffari
Journal of Alloys and Compounds 739, 780-792
|
| 2018 |
Green Method for Synthesizing Gallium Nitride Nanostructures at Low
Temperature
M Gholampour, A Abdollah-zadeh, L Shekari, R Poursalehi, ...
Journal of Optoelectronical Nanostructures 3 (1), 51-64
|
| 2017 |
Improving the wear and corrosion resistance of Ti–6Al–4V alloy by deposition
of TiSiN nanocomposite coating with pulsed-DC PACVD
F Movassagh-Alanagh, A Abdollah-Zadeh, M Aliofkhazraei, M Abedi
Wear 390, 93-103
|
| 2017 |
Experimental and numerical investigations into the failure mechanisms
of friction stir welded AA7075-T6 thin sheets
S Entesari, A Abdollah-Zadeh, N Habibi, A Mehri
Journal of Manufacturing Processes 29, 74-84
|
| 2017 |
Influence of welding parameters on intermetallic compounds formation
in dissimilar steel/aluminum friction stir welds
M Pourali, A Abdollah-Zadeh, T Saeid, F Kargar
Journal of Alloys and Compounds 715, 1-8
|
| 2017 |
Correlation between the duty cycle and the surface characteristics for
the nanostructured titanium aluminum nitride coating deposited by pulsed-DC
PACVD technique
H Elmkhah, A Abdollah-Zadeh, F Mahboubi, ARS Rouhaghdam, ...
Journal of Alloys and Compounds 711, 530-540
|
| 2017 |
Pulsed DC-Plasma Assisted Chemical Vapor Deposition of α-rich Nanostructured
Tantalum Film: Synthesis and Characterization
H Ghorbani, A Abdollah-zadeh, A Poladi, M Hajian
International Journal of Engineering 30 (4), 551-557
|
| 2017 |
The mutual effects of hydrogen and microstructure on hardness and impact
energy of SMA welds in X65 steel
R Miresmaeili, A Abdollah-Zadeh
Materials Science and Engineering: A 679, 87-94
|
| 2016 |
Surface characteristics for the TiAlN coatings deposited by high power
impulse magnetron sputtering technique at the different bias voltages
H Elmkhah, TF Zhang, A Abdollah-Zadeh, KH Kim, F Mahboubi
Journal of Alloys and Compounds 688, 820-827
|
| 2016 |
Microstructural evolution and wear resistance of friction stir-processed
AISI 52100 steel
RA Seraj, A Abdollah-Zadeh, M Hajian, F Kargar, R Soltanalizadeh
Metallurgical and materials transactions A 47 (7), 3564-3572
|
| 2015 |
Effects of friction stir processing on wear properties of WC–12% Co
sprayed on 52100 steel
A Rahbar-Kelishami, A Abdollah-Zadeh, MM Hadavi, A Banerji, A Alpas,
...
Materials & Design 86, 98-104
|
| 2015 |
A catalyst free method to grow GaN nanowires on porous Si at low temperature
M Gholampour, A Abdollah-Zadeh, L Shekari, R Poursalehi
Ceramics International 41 (10), 13855-13860
|
| 2015 |
Qualitative evaluation of mechanical properties of nanostructured TiAlN
coatings deposited on cutting tools by analysis of XRD results.
H Elmkhah, A Abdollah-zadeh, F Mahboubi, KH Kim
Modares Mechanical Engineering 14 (12)
|
| 2015 |
Microstructure and mechanical properties of friction stir processed
AISI 316L stainless steel
M Hajian, A Abdollah-Zadeh, SS Rezaei-Nejad, H Assadi, SMM Hadavi,
...
Materials & Design 67, 82-94
|
| 2015 |
Formation of nanostructure in AISI 316L austenitic stainless steel by
friction stir processing
SS Rezaei-Nejad, A Abdollah-Zadeh, M Hajian, F Kargar, R Seraj
Procedia Materials Science 11, 397-402
|
| 2015 |
Synthesis of GaN Cauliflower-like Nanostructures via Plasma Enhanced-CVD
M Gholampour, A Abdollah-zadeh, R Poursalehi, L Shekari, ...
Procedia Materials Science 11, 299-303
|
| 2015 |
From nanoparticles to nanowires of GaN with different hydrogen gas flow
rates by PDC-PECVD
M Gholampour, A Abdollah-Zadeh, L Shekari, R Poursalehi
Procedia Materials Science 11, 304-308
|
| 2014 |
Improvement of wear resistance of sprayed layer on 52100 steel by friction
stir processing
A Rahbar-Kelishami, A Abdollah-Zadeh, MM Hadavi, RA Seraj, ...
Applied Surface Science 316, 501-507
|
| 2014 |
Improvement in cavitation erosion resistance of AISI 316L stainless
steel by friction stir processing
M Hajian, A Abdollah-Zadeh, SS Rezaei-Nejad, H Assadi, SMM Hadavi,
...
Applied Surface Science 308, 184-192
|
| 2014 |
Gold catalyst effect on the morphological and structural properties
of GaN nanostructures deposited by plasma enhanced chemical vapor deposition
M Gholampour, A Abdollah-Zadeh, R Poursalehi, L Shekari
Materials Letters 120, 136-139
|
| 2014 |
Investigating the formation of intermetallic compounds during friction
stir welding of magnesium alloy to aluminum alloy in air and under liquid
nitrogen
MA Mofid, A Abdollah-Zadeh, CH Gür
The International Journal of Advanced Manufacturing Technology 71
(5), 1493-1499
|
| 2014 |
Microstructure evolution and texture development in a friction stir-processed
AISI D2 tool steel
N Yasavol, A Abdollah-Zadeh, MT Vieira, HR Jafarian
Applied surface science 293, 151-159
|
| 2014 |
Synthesis of GaN Nanoparticles by DC Plasma Enhanced Chemical Vapor
Deposition
M Gholampour, A Abdollah-Zadeh, R Poursalehi, L Shekari
Advanced Materials Research 829, 897-901
|
| 2013 |
Effect of severe plastic deformation on hot cracking of wrought aluminium
alloy in pulsed laser welding
Z Malekshahi Beiranvand, F Malek Ghaini, M Sheikhi, A Abdollah-Zadeh
Science and Technology of Welding and Joining 18 (6), 473-477
|
| 2013 |
Effect of applied load on the dry sliding wear behaviour and the subsurface
deformation on hybrid metal matrix composite
SA Alidokht, A Abdollah-Zadeh, H Assadi
Wear 305 (1-2), 291-298
|
| 2013 |
Microstructure and mechanical properties of a dissimilar friction stir
weld between austenitic stainless steel and low carbon steel
M Jafarzadegan, A Abdollah-Zadeh, AH Feng, T Saeid, J Shen, H Assadi
Journal of Materials Science & Technology 29 (4), 367-372
|
| 2013 |
Nano-crystallization of Fe36Cr12Mo10 phase in Fe55− xCr18Mo7B16C4Nbx
(X= 0, 3, 4) amorphous alloys
S Ahmadi, HR Shahverdi, M Afsari, A Abdollah-zadeh
Journal of non-crystalline solids 365, 47-52
|
| 2013 |
Microstructure and mechanical behavior of pulsed laser surface melted
AISI D2 cold work tool steel
N Yasavol, A Abdollah-Zadeh, M Ganjali, SA Alidokht
Applied Surface Science 265, 653-662
|
| 2013 |
Microstructural and tribological properties of ultra fine grained hybrid
composite produced by friction stir processing
S Soleymani, A Abdollah-Zadeh, SA Alidokht
Materials physics and mechanics 17 (1), 6-10
|
| 2012 |
Microstructural characterization in dissimilar friction stir welding
between 304 stainless steel and st37 steel
M Jafarzadegan, AH Feng, A Abdollah-Zadeh, T Saeid, J Shen, H Assadi
Materials Characterization 74, 28-41
|
| 2012 |
Submerged friction-stir welding (SFSW) underwater and under liquid nitrogen:
an improved method to join Al alloys to Mg alloys
MA Mofid, A Abdollah-Zadeh, FM Ghaini, CH Gür
Metallurgical and materials transactions A 43 (13), 5106-5114
|
| 2012 |
Size-dependency of corrosion behavior for TiN nanostructure coatings
deposited by the PACVD method
H Elmkhah, F Mahboubi, A Abdollah-Zadeh, S Ahangarani, M Raoufi,
...
Materials Letters 82, 105-108
|
| 2012 |
The effect of water cooling during dissimilar friction stir welding
of Al alloy to Mg alloy
MA Mofid, A Abdollah-Zadeh, FM Ghaini
Materials & Design (1980-2015) 36, 161-167
|
| 2012 |
Microstructural and tribological properties of Al5083 based surface
hybrid composite produced by friction stir processing
S Soleymani, A Abdollah-Zadeh, SA Alidokht
Wear 278, 41-47
|
| 2012 |
Evaluation of microstructure and wear behavior of friction stir processed
cast aluminum alloy
SA Alidokht, A Abdollah-Zadeh, S Soleymani, T Saeid, H Assadi
Materials Characterization 63, 90-97
|
| 2011 |
Improvement in tribological properties of surface layer of an Al alloy
by friction stir processing
S Soheyl, A Amir, A Sima Ahamd
Journal of surface engineered materials and advanced technology
2011
|
| 2011 |
Microstructure and tribological performance of an aluminium alloy based
hybrid composite produced by friction stir processing
SA Alidokht, A Abdollah-Zadeh, S Soleymani, H Assadi
Materials & Design 32 (5), 2727-2733
|
| 2010 |
On the formation of grain structure during friction stir welding of
duplex stainless steel
T Saeid, A Abdollah-Zadeh, T Shibayanagi, K Ikeuchi, H Assadi
Materials Science and Engineering: A 527 (24-25), 6484-6488
|
| 2010 |
The effect of cooling rate on the precipitation of γ′ in Ni-11.6 at.%
Al alloy
A Samadi, A Abdollah-zadeh, SH Razavi, H Assadi
Journal of Advanced Materials in Engineering (Esteghlal) 29 (1),
9-19
|
| 2010 |
Effect of Composition on the Precipitation ofg¢ in Rapidly Quenched
Ni-Al Binary Alloys
A Samadi, A Abdollah-zadeh, H Assadi
Modares Mechanical Engineering 10 (1), 103-109
|
| 2010 |
Weldability and mechanical properties of dissimilar aluminum–copper
lap joints made by friction stir welding
T Saeid, A Abdollah-Zadeh, B Sazgari
Journal of Alloys and Compounds 490 (1-2), 652-655
|
| 2010 |
EBSD investigation of friction stir welded duplex stainless steel
T Saeid, A Abdollah-Zadeh, T Shibayanagi, K Ikeuchi, H Assadi
World Academy of Science, Engineering and Technology 61, 376-379
|
| 2009 |
Effect of severe plastic deformation on grain boundary liquation of
a nickel–base superalloy
SM Mousavizade, FM Ghaini, MJ Torkamany, J Sabbaghzadeh, ...
Scripta Materialia 60 (4), 244-247
|
| 2009 |
Effect of Solid Solution Supersaturation on Precipitation of γin Rapidly
Quenched Ni-Al Binary Alloys
A Samadi, A Abdollah-zadeh, S Behrouzghaemi, SH Razavi
Journal of materials science & technology 25 (1), 130
|
| 2008 |
Effect of friction stir welding speed on the microstructure and mechanical
properties of a duplex stainless steel
T Saeid, A Abdollah-Zadeh, H Assadi, FM Ghaini
Materials Science and Engineering: A 496 (1-2), 262-268
|
| 2008 |
A study on fracture properties of multiphase microstructures of a CrMo
steel
A Salemi, A Abdollah-Zadeh, M Mirzaei, H Assadi
Materials Science and Engineering: A 492 (1-2), 45-48
|
| 2008 |
Microstructural and mechanical properties of friction stir welded aluminum/copper
lap joints
A Abdollah-Zadeh, T Saeid, B Sazgari
Journal of alloys and Compounds 460 (1-2), 535-538
|
| 2008 |
Mechanical behavior of CrMo steel with tempered martensite and ferrite–bainite–martensite
microstructure
A Abdollah-Zadeh, A Salemi, H Assadi
Materials Science and Engineering: A 483, 325-328
|
| 2008 |
The effect of tempering temperature on the mechanical properties and
fracture morphology of a NiCrMoV steel
A Salemi, A Abdollah-Zadeh
Materials Characterization 59 (4), 484-487
|
| 2007 |
Effects of Induction and Convention Aging on Growth Kinetics and Distribution
of Nanometric γ′ Precipitates in an Ni‐Based Superalloy
A Abdollah‐Zadeh, S Soleimani, A Samadi, H Assadi
AIP Conference Proceedings 929 (1), 111-116
|
| 2007 |
Dynamic softening of ferrite during large strain warm deformation of
a plain-carbon steel
B Eghbali, A Abdollah-Zadeh, PD Hodgson
Materials Science and Engineering: A 462 (1-2), 259-263
|
| 2007 |
Mechanism of ferrite grain refinement during warm deformation of a low
carbon Nb-microalloyed steel
A Abdollah-Zadeh, B Eghbali
Materials Science and Engineering: A 457 (1-2), 219-225
|
| 2007 |
Effect of welding parameters on dilution and weld bead geometry in cladding
M Nouri, A Abdollah-zadeh, F Malek
Journal of materials science & technology 23 (6), 817
|
| 2007 |
Effect of Friction Stir Welding parameters on the microstructures and
mechanical properties of 304 Stainless Steels
M Jafarzadegan, T Saeid, A Abdollah-zadeh
Proceedings of The Fifth International Conference on Physical and
Numerical …
|
| 2007 |
GTAW-Deposition of INCONEL 625 on Steel: Processing and Characterization
M Jamshidinia, A Abdollah-zadeh, T Saeid, F Malek
Proceedings of The Fifth International Conference on Physical and
Numerical …
|
| 2007 |
A study of growth kinetics and distribution of Χ precipitates in an
induction-aged nickel-base superalloy
S Soleimani, A Abdollah-Zadeh, A Samadi, H Assadi
Journal of optoelectronics and advanced materials 9 (6), 1789-1792
|
| 2007 |
Deformation-induced ferrite transformation in a low carbon Nb–Ti microalloyed
steel
B Eghbali, A Abdollah-Zadeh
Materials & Design 28 (3), 1021-1026
|
| 2006 |
Influence of deformation temperature on the ferrite grain refinement
in a low carbon Nb–Ti microalloyed steel
B Eghbali, A Abdollah-Zadeh
Journal of Materials Processing Technology 180 (1-3), 44-48
|
| 2006 |
Characterization on ferrite microstructure evolution during large strain
warm torsion testing of plain low carbon steel
B Eghbali, A Abdollah-Zadeh, H Beladi, PD Hodgson
Materials Science and Engineering: A 435, 499-503
|
| 2006 |
Strain-induced transformation in a low carbon microalloyed steel during
hot compression testing
B Eghbali, A Abdollah-Zadeh
Scripta materialia 54 (6), 1205-1209
|
| 2005 |
Tempered martensite embrittlement in a 32NiCrMoV125 steel
A Abdollah-Zadeh, A Jafari-Pirlari, M Barzegari
Journal of materials engineering and performance 14 (5), 569-573
|
| 2005 |
The influence of thermomechanical parameters in ferrite grain refinement
in a low carbon Nb-microalloyed steel
B Eghbali, A Abdollah-Zadeh
Scripta Materialia 53 (1), 41-45
|
| 2005 |
THE EFFECT OF THERMOMECHANICAL PARAMETERS ON THE HOT WORKABILITY OF
2024 ALUMINUM ALLOY
KA KHALAJ, A ABDOLLAH-ZADEH
INTERNATIONAL JOURNAL OF INDUSTRIAL ENGINEERING AND PRODUCTION MANAGEMENT
…
|
| 2005 |
Effects of Mn and Cu on the mechanical properties of a high strength
low alloy NiCrMoV steel
A Abdollah-Zadeh, M Belbasy
材料科学技术: 英文版 21 (4), 470-474
|
| 2005 |
Effect of strain rate on the ferrite grain refinement in a low carbon
Nb-Ti microalloyed steel during low temperature deformation
B Eghbali, A Abdollah-Zadeh
材料科学技术: 英文版 21 (6), 851-855
|
| 2004 |
The effect of thermal fatigue on the hardness of hard chromium electroplatings
SMM Hadavi, A Abdollah-Zadeh, MS Jamshidi
Journal of materials processing technology 147 (3), 385-388
|
| 2004 |
Thermal fatigue behaviour of a chromium electroplated 32NiCrMo145 steel
A Abdollah-zadeh, MS Jamshidi, SMM Hadavi
材料科学技术: 英文版 20 (3), 269-273
|
| 2004 |
Formation of Recrystallized Grains in a Hot Deformed Austenitic Fe-Ni-C
Alloy
A Abdollah-Zadeh, DP Dunne
JOURNAL OF MATERIALS SCIENCE AND TECHNOLOGY-SOFIA- 12 (1), 15-25
|
| 2001 |
THE EFFECT OF THERMOMECHANICAL TREATMENTS ON THE MORPHOLOGY OF INCLUSIONS
AND THE MECHANICAL PROPERTIES OF D6AV STEEL
A ABDOLLAH-ZADEH, N KAVIANI, SM ABBASI
MODARES TECHNICAL AND ENGINEERING
|
| 1996 |
The investigation of deformation, recovery, recrystallization and precipitation
in austenitic HSLA steel analogue alloys
A Abdollah-Zadeh
|
| 1996 |
The Effect of Niobium on the Recovery of Deformed Austenite
A Abdollah-Zadeh, DP Dunne
MECHANICAL WORKING AND STEEL PROCESSING CONFERENCE PROCEEDINGS,
689-694
|
| 1995 |
Recovery and recrystallization in a hot deformed austenitic Fe-Ni-C
alloy
A Abdollah-Zadeh, DP Dunne
Microstructural and Crystallographic Aspects of Recrystallization,
247-252
|
| |
Superalloys II, John Wiley & Sons, 1987.[23] Grosdidier T., Hazotte
A., Simon A.; Mat. Sci. & Eng.; Vol. 275A, 1998, pp 183-196.[24] Zhao
Sh., Xie X., Smith GD, Patel Sh. J.
A Abdollah-zadeh
|
| |
The Effects of Tool Rotational Speed on the Microstructure and Mechanical
Properties of Friction Stir Welded 7075-T6 Aluminum Thin Sheet
A Mehri, A Abdollah-zadeh, S Entesari, HAJT Wang
|
| |
A COMPARISON OF FSP EFFECTS ON WEAR PROPERTIES OF TWO DIFFERENT SPRAYED
LAYERS ON 52100 STEEL
A Abdollah-zadeh, A Rahbar-kelishami, F Kargar, AP Gerlich, M Hajian
|
| |
Synthesis of TiSiN hard nanocomposite coating by PACVD method
F Movassagh-Alanagh, A Abdollah-zadeh, M Aliofkhazraei
|
| |
Influence of duty cycle on biocompatibility of nanostructured tantalum
film deposited by pulsed DC PACVD
H Ghorbani, A Abdollah-zadeh, A Poladi
|
| |
Microstructure and tribological performance of a steel based Surface
Nano composite produced by friction stir processing.
A Amirafshar, A Abdollah-Zadeh
|
